1 / 23

Unit 10 Keymax, Industrial Park 1006 Ergon Road Lyttelton

Workshop Equipment. CATALOGUE. Unit 10 Keymax, Industrial Park 1006 Ergon Road Lyttelton info@imworkshopequipment.co.za www.imworkshopequipment.co.za Tel: (012) 664 3556

prude
Download Presentation

Unit 10 Keymax, Industrial Park 1006 Ergon Road Lyttelton

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Workshop Equipment CATALOGUE Unit 10 Keymax, Industrial Park 1006 Ergon Road Lyttelton info@imworkshopequipment.co.za www.imworkshopequipment.co.za Tel: (012) 664 3556 Fax: (086) 568 8466

  2. Product and colour may vary from pictures shown

  3. Page 1 Air Con Service Equipment Zell AC1000-3G Air-Con Service Station AC1000-3G Specification & Configuration Refrigerant R134a Operating Temperature 5 – 50 o C Max pressure 18 bar Power Supply 220v, 50Hz Weight 95kg Packing Size 50 x 70 x 107cm HP/LP Gauge 80mm/class 1.0 Tank Gauge 40mm LCD back lit 192 x 64 dot HP/LP hoses 250cm / SAE-JS2196 Compressor 3/8hp, 14cc Fan/ condenser Yes Filter Drier 80kg Vacuum Pump 120L/min, 4.2cfm PAG bottle 250ml Electronic Scale 1g / 30kg Zell AC1000-HFO Air-Con Service Station AC1000-HFO Specification & Configuration Refrigerant HFO-R1234yf Operating Temperature 5 – 50 o C Max pressure 18 bar Power Supply 220v, 50Hz Weight 95kg Packing Size 50 x 70 x 107cm HP/LP Gauge 80mm/class 1.0 Tank Gauge 40mm LCD back lit 192 x 64 dot HP/LP hoses 250cm / SAE-JS2196 Compressor 3/8hp, 14cc Fan/ condenser Yes Filter Drier 80kg Vacuum Pump 120L/min, 4.2cfm Tank 14.5 L PAG bottle 250ml Electronic Scale 1g / 30kg AC Leak Detection Kit Add leak detection dye to the system that you want to inspect. Scan the system with the special fluorescent glasses and UV light. This Dye can be injected directly into the AC system. Kit consist of enough Dye to inspect 14 vehicles. Product and colour may vary from pictures shown

  4. Page 2 Tyre Tools IM- BBR Bead Knocker / Stamper IM- BB Bead Blaster IM-BB-10 IM-BB-05 IM- Tubeless Tyre Changing Tool Set Demounting Tool Mounting Tool Weight: 15kgDimension: 600x480x360mm Bead Keeper Weight: 11kgDimension: 400x450x360mm Set consists of: 1 x Demounting Tool, 1 x Mounting Tool, 1 x Bead Keeper Mount and de-mount all tubeless tires 17.5'' to 24.5''. Demount tyre in 8 seconds, Re-mount in 20 seconds without strain - Two simple tools do it all. Works on all standard tubeless and super single duplex tyres. The Changing Tools do not damage beads. Mounts and demount tyres without the need to lift the tyre. The bead keeper prevent the bead from skipping when mounting the top bead. Metal construction coated with PVC will not scratch aluminium wheels Rapid tyre inflation, after tyre fitting. Equipped with automatic purge of over limit pressure., Supplied with Pressure Gauge Input pressure: 8 bar /120psi Operating pressure: 6 - 8 bar / 87-116psiMax. pressure: 10 bar / 145Psi Pneumatic Thumb operated Tyre Spreader IM- AAT400 Tyre Caddy Stack Height 1500mm Weight 17kg Packing size 850 x 600 x 1530mm Due to its jaws and easy manoeuvrability, it allows a pile of tyres to be loaded without having to touch them by hand Thumb operated pneumatic tyre spreader, used to spread tyres open for inspection or repairs. IM - Easy tyre mount/demount Kit The Easy Tyre Mount /Demount Kit has become the industry standard for changing tubeless truck tyres. By using simple principles of leverage, the Easy tyre Mount/Demount kit actually works with the tyre and rim to do the work for you, in less time, with less strain, at a fraction of the cost of tyre changing machines. The Easy tyre mount/demount kit mounts and dismounts all tubeless truck tyres from 17.5” up to 24.5” and all super singles. It’s the safest, fastest, and easiest way ever invented to change tubeless truck tyres – guaranteed not to damage tyre beads. Product and colour may vary from pictures shown

  5. Page 3 Brake Lathe’s IM- AA202D On car brake disc lathe Maximum brake disc thickness 40mm Adjustment knob accuracy ≤0.02mm -≤0.01mm Feed rate 8.5mm/min Electrical specifications 220V / 110V Net weight 11kg 415 x 295 Drive Unit: Working height min / max 1 / 1.20m Drive speed 98rpm Electrical specifications 220V / 110V Weight 68kg Ambient temperature range -20℃ to 40℃ Year of construction show on information plate Turning accuracy ≤ 0.005mm Brake disc run out ≤ 0.005mm Brake disc thickness variation 0.005 – 0.01mm Brake disc surface roughness Ra 1.5 – 2.0um Standard parts for BL-202D IM- OTCL450A On car brake disc lathe Maximum rotor turning diameter 360mm Maximum Rotor Thickness 51mm Maximum Rotor friction Surface Area 76mm Feed Distance 110mm Spindle Revolutions Variable Speed 30-120 RPM Motor Power 1.5HP (1.1kw) @ 3450rpm Electric Power AC220v 50/60Hz 15A IM- C9350 Off car brake disc lathe Spindle Travel 175mm Spindle Speed 70, 80, 118 RPM Min Spindle Feed Speed 0.05 mm per revolution Max Spindle Feed Speed 0.50mm per revolution Min Cross Feed Speed 0.05 mm per revolution Max Cross Feed Speed 0.50 mm per revolution Hand wheel Graduations 0.05mm Rotor Diameter 180mm – 381mm Rotor Thickness 48mm Drum Diameter 152mm – 711mm Drum Depth 175mm Motor 1PH 220v 50/60 Hz / 3PH 380v 50/60Hz Weight 200kg Dimensions 970 x 920 x 1140mm IM- C9335B Off car brake disc / drum lathe Drum Diameter 180-350mm Slide Travel 100mm Rotational Speed of spindle 60, 90 RPM Feed 0.15mm per revolution Motor Power 0.75Kw Overall Dimensions 695mm x 565mmx 635mm Packing Dimensions 710mm x 750mm x 730mm Nett Weight 200kg Gross Weight 230kg Product and colour may vary from pictures shown

  6. Page 4 IM- SD1206 Coil Spring Compressor IM- SD1205 Coil Spring Compressor Capacity： 1Ton Max. working length: 450mm Ram travel: 420mm Spring size: 4~6-1/2 inch Air pressure: 0.65-0.9MPa N.W.: 63kgs G.W.: 67kgs Package Size：140.5x54.5x29cm Specifications Maximum Load : 1500 Upper Yoke positions: 7 Lower Yoke Travel: 340mm Spring Diameter: 102 – 160mm Foot operated air hydraulic unit IM- AA0601D Hydraulic Engine Crane 3 ton IM- AA0101G Telescopic Gearbox Jack Rated loading capacity 3 ton Maximum Height 2200 mm G.W. 113kg N.W. 118kg Packing size 1130 x 810 x 110mm 1420 x 310 x 210mm 730 x 200 x 190mm Rated loading capacity 1 ton Minimum Height 830mm Maximum Height 1760mm G.W. 89kg N.W. 79kg Packing size 550 x 370 x 1000mm IM - Hydraulic Pipe Bender IM- HA8000 Headlight Aimer Measuring Range: Central Height of Headlight 50cm – 130cm Light Intensity of High Beam +/- 100cd Indication Error: Light Intensity of High Beam +/- 12% Measure distance : 30 – 50cm Power consumption <0.5W Dimensions 590mm x 1810 mm x 590mm Nett Weight 30kg Environmental Temperature 5 – 40 degrees C Relative humidity: Less than 95% Atmosphere Pressure: 70 – 106 Kpa Power Supply: 9v DC (If AC power is used an inverter should be used) • Maximum bending radius: 5" / 127 mm • Minimum bending radius: 3-1/3" / 89 mm • Maximum tube capacity: 3" / 76 mm / .095 wall • Standard die pack (BB-1): 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" • Top cylinder working force: 60,000 lbs. / 27,216 kg • Dimensions: 42" x 62" x 31" / 1,067 mm x 1,575 mm x 787 mm • Standard motor: 5 Hp / 208 - 230 VAC / 60 Hz / 1 pH • Shipping weight: 1,264 lbs. / 573 kg • Shipping dimensions: 48" x 70" x 30" / 1,219 mm x 1,778 mm x 762 mm Atek Multi - Electrical 1” Impact Wrench 1” Impact Wrench Standard Accessories: 3 Impact sockets, 1 Safety pin, 1 Fixing O-ring Technical Specifications: Height 1070mm Width 1340mm, Length 560mm, Net Weight 64kg , Spindle Torque : 37Kpm / 370Nm, 52Kpm / 520Nm, 64Kpm / 640Nm, 71Kpm / 710Nm 380v Product and colour may vary from pictures shown

  7. Page 5 SA40 Two Post Lift with base plate – 4 ton capacity (Manual Release) Floor plate design, more suitable for low ceiling workshops. Single side Manual lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity. Dual antic skidding safety device from column ladder safety to hydraulic seal protection. Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High strength chain drive system. High quality seals from Italy. Quality power rack. CE Certified – Red Also Available in Electric Release (SAE40) Reinforcement base plate for uneven floor SB40 Two Post Lift , Base free – 4 ton capacity (Manual Release) Clear floor design makes under-vehicle service more convenient. Manual lock release on both sides. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity. Dual anti skidding safety device from column ladder safety to hydraulic seal protection. Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High strength chain drive system, High quality seals from Italy. CE Certified – Red Also available in Electric Release (SBE40) SBE40H Two Post Lift , Base free – 4 ton capacity - Extended Height (Electric Release) • Clear floor design makes under vehicle service more convenient. Single side electrical lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity .Dual antic skidding safety device from column ladder safety to hydraulic seal protection Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High quality seals from Italy. High strength chain drive system, Quality power rack - Red Product and colour may vary from pictures shown

  8. Page 6 SAE40 Two Post Lift with base plate – 4 ton capacity (Electric Release) Reinforcement base plate for uneven floor Floor plate design, more suitable for low ceiling workshops. Single side electrical lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity. Dual antic skidding safety device from column ladder safety to hydraulic seal protection. Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High strength chain drive system. High quality seals from Italy. Quality power rack. CE Certified - Red SBE40 Two Post Lift , Base free – 4 ton capacity (Electric Release) • Clear floor design makes under vehicle service more convenient. Single side electrical lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity .Dual antic skidding safety device from column ladder safety to hydraulic seal protection Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High quality seals from Italy. High strength chain drive system • Quality power rack - Red Product and colour may vary from pictures shown

  9. Page 7 SDW50 Four Post Wheel Alignment Lift – 5 ton capacity Supplied with built in slip plates, recessed for turn tables and auxiliary jacking support Cylinder located inside of the runway, perfectly protected. Electrical protection devices in four columns ensure synchronization of runways. Adjustable runways to accommodates different size vehicles . ABS control box, 24v low voltage control system. Hydraulic hose and cable protection system . Single side manual lock release. Heavy duty cables, Top limit switch. Aluminum motor with cooling fan. CE certified IM-6006- Auxiliary jack & cradle 3 ton capacity - Air operated IM-C/Jack- Auxiliary jack with hand pump IM-6006- Auxiliary jack & cradle support 3 ton capacity - Air operated Scoda TT - Turn Tables, Mechanical This portable tyre changer is equipped with professional accessories, can be operated easily without power and pneumatic supplies. It can work for different kinds of vehicle tyres, such as MXT, ATV, scooter, and electro mobiles. It is perfect for family garage, racing team, long driving journey, emergencies, and different kinds of automobile garages. SA3TP Four Post Exhaust Lift – 3.6 ton capacity Hydraulic driven, cable lifting system. Single side manual lock release. Four point automatic safety locks. Width between runways non adjustable. Integrated hydraulic drive system. Conforms with CE requirements Red Product and colour may vary from pictures shown

  10. Page 8 IM - LR30 Low Level Lift IM-OE Lift With lowest height at 120mm, This ultra-thin lifter makes the earthwork foundation unnecessary. As required, the lifter platform has lengthening function that the platform length can be adjusted automatically when lifting normal-length cars and extra-length cars. Auxiliary accessories are available. SpecificationsSupply voltage : 220VPower : 750WMax. lifting weight 2.5TMax. Lifting height 580mm Lowered height 80mmTotal weight 375KG IM – LR45 Heavy Duty Low Level Lift 4.5 ton Lifting capacity: 4500KG Max. lifting height: 580 mm Min. height: 80 mm Platform length: 1400 mm Platform width: 580 mm Product Length: 2100 mm Product Width: 1900 mm Scoda SCK-B30 Mid Rise Level Lift Lifting capacity: 3000KG Max. lifting height: 1000 mm Min. height: 110 mm Platform length: 1400 mm Platform width: 490 mm Product Length: 1900 mm Product Width: 1780 mm IM– ABL2 Air Bellow Low Level Lift Lifting capacity: 2800kg Max. lifting height: 400mm Min. height: 120mm Platform length: 1350mm Platform width: 650mm Approx. Weight: 550 kg Air Operated Double Air Bellow Product and colour may vary from pictures shown

  11. Page 9 IM-SD1010ND Pneumatic Motorcycle Lift with side ext for ATV IM- M03804 Hydraulic Motorcycle Lift Lifting Capacity 360kg Minimum Height 180mm Max Height 680mm NW 107kg GW 129kg Packing size 1980 x 580 x 260mm Platform size 1900 x 530 mm Hydraulic pump. Front wheel clamp for securing motorcycle Safety bar prevents accidental falling, Adjustable foot for stability, Removable rear loading ramp. Capacity:1000lbs Min.ht:200mm Max.ht:850mm Platform size:2225×605mm Ramp size:605×550mm N.W.:165kgs G.W.:207kgs Package size:229×67×29.5cm M806 Motorcycle Tyre Changer SD-12B Static Wheel Balancer Max Wheel Diameter 960mm Rim Width 3” – 10” Outside Clamping 6” – 24” Rotation Speed 7 rpm Power 0.75 -1.1kw Machine weight 175 kg Specially designed tyre changer for two and four wheel motorcycle tyres. Special Tool head designed specifically for easy mounting & dismounting of motorcycle tyres of all sizes. The shape of the bead breaker blade will easily break the bead of small , narrow and standard motorcycle tyres. The sliding clamping jaws have three positions that will cover from 6” to 24” rims. IM-SLA Wheel Alignment Scissors lift * Robust construction and super-balanced lifts for wheel alignment. * Flush mounted or surface mounted if access ramps equipped * Electro-hydraulic jack * Leveling controlled hydraulically * Mechanical safety lock with air operated engagement and release * Manual emergency lowering * Adjustable position of turntable and longer sliding plate * Adjustable jack frame * Limit switch for maximum lifting height * High quality hydraulic, pneumatic and electric components Product and colour may vary from pictures shown

  12. Page 10 PN-8830 Nitrogen Generator PN-8820 Nitrogen Generator NPA - Nitrogen Purity Analyzer Equipped with preset and manual inflation * Two outlets for nitrogen, this product can inflate two tyres at the same time. * It is also equipped with an air outlet to fill air. * Equipped with four foot casters * Generates * Nitrogen from your compressed air *2 Pre-Filters / LED display * 55L internal Nitrogen Storage Tank. * Remains at last setting * Audible and visual end of the cycle signal indicators * Automatic vacuum supply and nitrogen-fill. Power Requirement 100-240Vac 50/60Hz * Operating Temperature -20º to 70ºC * Compressed Air Input Range 6-8.5bar * Nitrogen Purity >97% * Nitrogen Output 70L/min @ 9bar/900kPa * Maximum Nitrogen Pressure in Tank 800kPa/8bar * Accuracy +/-1 psi, 7 kPa, 0.07 bar * Units of Measurement psi, kPa, bar * Suitable for cars and light trucks, Green Auto-start inflation * Automatic zero drift adjustment * Remains at last setting* Audible and visual end of the cycle signal indicators * LCD display * 2 x 8m/26ft standard hoses * 4 air outlets allow simultaneous inflation of up to 4 tires* Automatic Nitrogen Purge and Fill * 55L internal * Nitrogen Storage Tank. cycle(N2P) * Power Requirement 100-240Vac 50/60Hz * Operating Temperature -20º to 70ºC * Compressed Air Input Range 6-8.5bar * Nitrogen Purity 95-99.99% * Nitrogen Output 70L/min (2.5cfm) @ 9bar/900kPa * Maximum Nitrogen Pressure in Tank 800kPa/8bar * Accuracy +/-1 psi, 7 kPa, 0.07 bar Units of Measurement psi, kPa, bar – Green color PN-8890 Nitrogen Generator Cars & Heavy Trucks PN-8850 Nitrogen Generator Cars & Light Trucks Product Features: Auto-start inflation * Automatic zero drift adjustment * Remains at last setting * Audible and visual end of cycle signal indicators * LCD display * 4 x 8m standard hoses * 4 Nitrogen outlets to fill Nitrogen * Equipped with four foot casters * Generates Nitrogen from your compressed air * External 120 liter nitrogen storage tank * Power Requirement 110/240Vac / 50-60HZ * Power Consumption 30W * Operating Temperature Range -20C to 70C * Compressed Air Input Range 6-8.5bar / 600-850kPa * Nitrogen Purity > 97% * Nitrogen Output 167L/min @ 9bar / 900kPa * Maximum Nitrogen Pressure 8bar / 800kPa * Nitrogen storage Tank * External 120 liters Suitable for Cars, Light Trucks – Color - Green Product Features: It is equipped with an air outlet to fill air. It is equipped with a Nitrogen outlet to fill Nitrogen * Equipped with four foot casters * Generates Nitrogen from your compressed air * 2 Pre-Filters * External 120 liter nitrogen storage tank * 10m standard hose supplied * Power Requirement 110/240Vac / 50-60HZ * Power Consumption 25W * Operating Temperature Range -20℃C to 70℃C * Compressed Air Input Range * 6-8.5bar / 600-850kPa * Nitrogen Purity > 97% * Nitrogen Output 236L/min @ 9bar/900kPa * Maximum Nitrogen Pressure 10bar / 1000kPa * Nitrogen storage Tank External 120 liters * Suitable for Cars, Light Trucks, Heavy Trucks, Color Green Product and colour may vary from pictures shown

  13. Page 11 Priman Preset Tyre Inflators PA105 Power Consumption 20W, Operating Temperature, Range: -20º C to 70º C, Max Inlet Air/Nitrogen Supply : 15bar/1500kPa, Operating Range : 0.3-12bar/35-1200kPa, Accuracy : ± 0.07bar/7kPa, Resolution: 0.1bar/5kPa, Units of Measurement , PSI/bar/kPaDimensions(L*W*H) 360 x 360 x1260mm, Packing Size(L*W*H) 1290 x 200mm, Net Weight 17.5kgGross Weight 21kg. PA105 Feature:Auto-start inflation, Automatic zero drift adjustment. Remain at last setting, Comprehensive diagnostics and error reporting, Audible and visual end of the cycle signal indicators. Large backlight LCD display, 1 x10m/32.8ft standard hose with single clip-on open type chuck PA108 PA101 Power Requirement 110/240Vac / 50-60Hz, Power Consumption 10VA, Operating Temperature Range -20º to 70º C, Max Inlet Air Supply 116PSI/8bar/800kPaOperating Range 5-102PSI/0.3-7bar/35-700kPa, Over Pressure Setting Range 0-2bar/0-200kPa, Accuracy ± 0.07bar/7kPa, Resolution 1PSI/0.1bar/5kPa, Units of Measurement PSI/bar/kPa, Dimensions (L *W*H) 230 x 120 x 290mm , Packing Size(L*W* H) 500 x 290 x 170mm , Net Weight 4kg, Gross Weight 6.5kg Same as PA101 but can inflate 4 tyres at a time Feature:Adjustable Over Pressure Setting (OPS), Auto-start inflation, Automatic zero drift adjustment., Remain at last setting, Comprehensive diagnostics and error reporting, Audible and visual end of the cycle signal indicators. Large backlight LCD display 1 x 10m/32.8ft standard hose with single clip-on open type chuck, Product and colour may vary from pictures shown

  14. Page 12 SD0201 Porta Power 10 ton Capacity IM-HM5401 Hydraulic Ram Kit Extension tubes snap together in seconds and fit perfectly without any tolerance. Chrome main rams guarantee optimum lifetime. Includes popular hydraulic ram spreader. Repairs dents and creases in tight places. Attachments push, pull and lift. Capacity: 10T Min. HT: 322mm Stroke: 130mm N.W.: 31.5kgs G.W.: 32.0kgs Packing Size: 71.5x31x16cm 2 Ton Ram Stroke:76mm Min. HT:139mm 10 Ton Ram Stroke:60mm Min. HT:118mm 10 Ton Ram Stroke:76mm Min. HT:139mm 10T (long) Stroke:150mm Min.HT:350mm 4T(long) Stroke:132mm Min. HT:276mm 2T(pull back ram) Stroke:128mm Min.HT:409mm 5T (pull back ram) Stroke:130mm Min.HT:483mm IM- SD0204 Porta Power 20 ton Capacity: 20 Ton Min. HT: 282mm Stroke: 128mm N.W.(1#): 31.0kgs G.W.(1#): 32.0kgs Packing Size: 81x30x20.5cm N.W.(2#):36.0kg G.W.(2#):37.0kg Packing size:81.5x40x11cm SD0811CE-Z – Press, Pneumatic 50 ton Capacity Winntec Y461501 – Press, Hydraulic 15 ton Capacity Ram stroke 200mm Side Stroke 245mm Working Range 69-1048mm Bed Width 730mm Air Pressure 7-8 bar Air inlet ¼” NTP N W 303kg GW 345kg Package size 98cm x 32cm x 211cm WY461501 -15 ton capacity. This press comes standard with a two speed pump, arbor and pressure gauge. Welded ready to use model. Nine different height positions for securing the table. Chrome main ram and pump pistons. Frame height 1730mm, Frame width 740mm, Hydraulic Stroke 195mm. Weight 131kg SD0881 – Press Electro Hydraulic 50 ton Capacity IM-100TP – Press Electro Hydraulic 100 ton Capacity Capacity 100 ton Output kW 1.5kW Voltage 380v Working Range 177- 1017mm Bed Width 787mm Ram stroke 300mm N W 680 kg NW 75kg GW 735kg GW 88kg Package size 114cm x 40cm x 211cm 37cm x 53cm x 79cm Capacity 50 ton Output 1.5kW Voltage 380v Working Range 210 - 1050mm Bed Width 730mm Ram stroke 200mm N W 287 kg NW 85kg GW 329kg GW 85kg Package size 99cm x 32cm x 211cm 34cm x 51cm x 74cm Product and colour may vary from pictures shown

  15. Page 13 Konig 5700 Rim Straightner with Lathe Junior Rim Straightening Machine Pressing positions Standard accessories The Konig 5700 Rim repair machine is designed to repair all rims between 10” and 24” with the aid of a hydraulic piston and a cleaning lathe. Rims can be returned to their original condition in minutes.The Konig 5700 is accompanied by various spacers, nuts and bolts to enable the user to mount any wheel for repairs. An electro magnetic pointer is supplied to aid the user in identifying dents and other imperfections on the rims. Rim diameter 10” – 24” Working Pressure : 140 bar• Net weight : 362 kg • Hydraulic Motor : 0,55 kW / 0,75 hp• Working Motor  : 0,75kW / 1,00 hp • Rotating Speed 250 RPM  The Atek Junior Rim repair machine is designed to repair all rims between 10” and 24” with the aid of a hydraulic piston. The unit is supplied with various spacers, nuts and bolts to enable the user to mount the wheel for repairs. A pointer is supplied to aid the user in identifying dents and other imperfections on the rims. Rim diameter 10” – 24” Working Pressure : 140 bar• Net weight : 178 kg • Hydraulic Motor : 0,55 kW / 0,75 hp Polish - Cln Rim Polisher RP2012 - Rim Polisher Optional Polisher for Atek 5700 Rim Repair Machine IM-RPK Rim Polish Kit Standard Accessories: 5 Piece polishing and cleaning brushes Technical Specifications: Rim Diameter 12” - 28” Polishing brush size Min 100 x 50 / Max 400 x 50 Rotating Speed 1400rpm Air working Pressure 8 -10 bar Polishing working motor 1,5 kW / 1400rpm Rim rotating motor 0.55kW / 1400rpm Nett Weight 115 kg 3 phase electric Motor Product and colour may vary from pictures shown

  16. Page 14 Tool Trolley / Cabinets Safety lock system prevents the drawers from opening accidentally, Lateral plates with peg panel design for hanging tools and various items, Replaceable name tag, heavy duty caster with two-way brake. IM-807 450kg Overall Loading Capacity Dimensions 865mm x 570mm x 1000mm Weight 70kg SD18 Tyre Changer - Manual Manual Tyre changer. Four jaw system that is hand operated. Turntable and bead breaker. Swing arm type. Technical Data Motorcycle tire size 5”‐22” Car tire size 9”‐20” Weight 34.5KG These manual tyre changers is equipped with professional accessories, that can be operated easily without power and pneumatic supplies. It can work for different kinds of tyres, such as MXT, ATV, scooter, and electro mobiles. It is perfect for family garage, racing team, long driving journey, emergencies, and different kinds of automobile garages. Product and colour may vary from pictures shown

  17. Page 15 M806 Motorcycle Tyre Changer LC810G Semi Automatic Tyre Changer Semi automatic tyre changer with swing arm. High quality mount/demount foot . Mag protectors for foot and claws. Water trap & oiler. Stainless steal bead breaking cylinder. Optional Motor cycle / ATV adaptor available. Max Wheel Diameter 960mm Rim Width 3” – 10” Outside Clamping 6” – 24” Rotation Speed 7 rpm Power 0.75 -1.1kw Machine weight 175 kg Max Wheel Diameter 1000mm Rim Width 4” - 12” Inside Clamping 12” - 24” Outside Clamping 10” - 20” Power 0.75 -1.1kw Rotation Speed 7 rpm Machine weight 175 kg Specially designed tyre changer for two and four wheel motorcycle tyres. Special Tool head designed specifically for easy mounting & dismounting of motorcycle tyres of all sizes. The shape of the bead breaker blade will easily break the bead of small , narrow and standard motorcycle tyres. The sliding clamping jaws have three positions that will cover from 6” to 24” rims. Bright 890PSemi Auto Tyre Changer with Help Arm Max Wheel Diameter 1250mm – 49” Max Wheel Width 400mm – 16” Outside Rim Dia 10-20” Inside Rim Dia 12-23” Machine Height (excluding arm) 2040mm Machine length 1135mm (excluding arm) 1135mm Machine width (excluding arm) 870mm Nett Weight (excluding arm) 233kg Operating Pressure 8-10bar Motor 1.1kw / 0.75kw Power 220v / 380v Turn Table Speed 6rpm Noise < 70dB LC887ITS Automatic Lever-less Tyre Changer Technical parameter： Max. wheel diameter ：1040mm Tire width ：3”-15” Rim diameter ：10”-24”/13”-26” Work air pressure ： 8-10bar Turntable speed ： 7-14rpm Voltage ：110V-220V-380V Power ：0.75/1.1Kw 22 inch arc turntable adjustable can handle tire with the rim diameter of 10-26inch. Standard accessories： 1-turntable protect plate：protect rim to avoid the rim being scratched by the turntable. There is scale on the guard plate for the convenience to fix the tire； 2-Clamping jaw protect cover：Inward clamping protect the Alu alloy rim to prevent the rim damage Product and colour may vary from pictures shown

  18. Page 16 887 Automatic Tyre Changer Max Wheel Diameter 1030mm Rim Width 3” - 15” Inside Clamping 13” -26” Outside Clamping 10” - 24” Power 0.75-1.1kw Machine weight 260 kg Speed Rotation 7 rpm AL320B Help Arm Automatic tyre changer with rear tilting arm. Pneumatic column lock. Mag protectors for foot and claws. Water trap and oiler. Stainless steal bead breaking cylinder. Turn tables equipped with a protective cover. 80MM Turn tables cylinder increases clamp force. The design of the bead breaking blade rotates enabling best bead breaking force. Optional: Help arm for low profile tyres LC588 Truck Tyre Changer LC590 Truck and OTR Tyre Changer Max Wheel Diameter 2200mm Wheel Width 1100mm Internal Clamping 14” -56” Working Pressure 150 bar Machine weight 987 kg Max Wheel Diameter 1500mm Wheel Width 1000mm Power Requirements 1.8kw Internal Clamping 14” -26” Working Pressure 150 bar Machine weight 561 kg CB910GB Wheel Balancer CB460B Truck / Car Wheel Balancer 3D Automatic measurement Multi-balancing modes Foot Brake Brake Up to 4 user modes Alu Split weight program LCD Display Statistical Analysis Lazer Scale Max Wheel Diameter 1000mm Wheel Width 20” Max Wheel Weight 65kg Accuracy 1g Rotation Speed 200rpm Motor 0.25kW Power Requirements 220v/1ph Machine weight 110 kg Manual data input Max Wheel Diameter 1200mm Wheel Width 20” Max Wheel Weight 200kg Accuracy 1g Rotation Speed 100/200rpm Power 0.55kw Machine weight 269 kg Equipped with a Wheel Lift Product and colour may vary from pictures shown

  19. Page 17 CB66 Smart Robot Wheel Balancer 1.Italian engineering software wheel balancer. 2.Five Alu modes and with wheel optimization mode and weight split( Hidden weight) function. 3.Standard 40mm threaded shaft, which can work with international standardized balancer accessories. Main shaft flange and threaded shaft threads which have been processed through supersonic quenching treatment. It is strong and endurable. 4.Machine calibration is easy to operate, which can restore machine's precision quickly. 5.Optional motorcycle balancing adapter kit is available. With motorcycle balancing mode. 1.Italian engineering software wheel balancer. 2.Automatic measurement and input of Distance and Diameter( DIS&DIA), with 5 ALU modes and 2 ALU Smart modes. With wheel optimization mode and wheel split and (Hidden weight) function. 3.Standard 40mm threaded shaft, which can work with international standardized balancer accessories. Main shaft flange and threaded shaft threads which have been processed through supersonic quenching treatment. It is strong and endurable. 4.Optional motorcycle balancing adapter kit is available. With motorcycle balancing mode. 5. With technical patent of weight position marking. 6.Machine calibration is easy to operate, which can restore machine's precision quickly. 7.With standard USB port. It is convenient to Upgrade the newer software. 8. Display type: LED . 9.With foot pedal design, when clamping or sticking on the weight more precisely. 10.With power-saving mode, machine comes into standby mode automatically if t CB67 Smart Robot Wheel Balancer CB68 Smart Robot Wheel Balancer 1.Italian engineering software wheel balancer. 2.Wheel three parameters fully automatic measurement & input. with 5 ALU modes and 2 ALU Smart modes. With wheel optimization mode and wheel split and (Hidden weight) function. 3.Standard 40mm threaded shaft, which can work with international standardized balancer accessories. Main shaft flange and threaded shaft threads which have been processed through supersonic quenching treatment. It is strong and endurable. 4.With technical patent of weight position marking. 5.Machine calibration is easy to operate, which can restore machine's precision quickly. 6.Optional motorcycle balancing adapter kit is available. With motorcycle balancing mode. 7.With standard USB port. It is convenient to Upgrade the newer software. 8.Display type: LED . 9.With foot pedal design, when clamping or sticking on the weight more precisely. 10.With power-saving mode, machine comes into standby mode automatically if the machine is not being in use after 5 minutes. 11.Electromaget automatic position brake function. 12.With LED side lamp illuminator. It is more visible in operation. Product and colour may vary from pictures shown

  20. Page 18 IM-QD52 Pneumatic Tyre Spreader IM- SD-2 Manual Tyre Spreader Features The hook can be adjusted according to the tyre width for medium-sized and small tyres. The operating platform can be turned to any place with ideal light during tyre repairing. Pneumatic upright tyre spreader for cars, light trucks and minibuses tyres. It is designed for locking and subsequent spreading of tyres. The machine allows performing such functions as inspection, sanding, polishing, dust extraction and patching. The machine is operated by way of two rubber coated foot pedals.(Air required). Tyre width: 100-375mm IM- One side lifter DB-88 Overturn Vulcanizing Machine DB-88 Features It can vulcanize any part of model 750-16 to model 1000-20 tires in single surface or double surfaces. It can maintain constant temperature automatically to ensure the temperature required during tire vulcanization. It can raise, lower or overturn the operating bracket to vulcanize according to the repair position of the tires of different models. It is equipped with five moulds in different angle and a purpose made heat conduct sand bag, which can ensure the repaired tire more conforms to the normal condition One column electric lift - Screw elevation system with no fixed position, Mobile - Easy to use - Under wheel support - Under car base (sill) with 2 fixing systems, 220v, Suitable for lifting cars up to 2500kg, Lifting time for maximum range: 35 seconds Maximum height of lifting 1000mm IM-PW150 High Pressure Cleaner IM-FY200 (FYMIG5320) Multi function Mig /Mag Welder Power 3Kw Voltage 380v R.P.M. 1450 r/min Flow rate: 9.2 L/min Max Pressure: 150bar Suction Lift : 3m Spray Range:10m Weight: 45kg Packing Dimensions: 690 x 400 x 500mm The pressure washer is supplied with five spray nozzles. Each nozzle is colour coded and delivers a specific spray pattern. The 0o, 15o, 25o and 40o nozzles are high pressure nozzles and the chemical nozzle is a low pressure nozzle. Input voltage: 380v or 220v. Rated input power: 11kva, input current 17 A (35a/15.7v – 320A/33v, Duty Cycle: 250A/100% - 320A/65%) Frequency 60-1200kHz, Steel wire diameter 0.6-1.2mm, Alu alloy wire diameter 0.8-1.2mm, Copper alloy wire diameter, 0.6-1.6mm, Wire feeder, Two way dual drive Product and colour may vary from pictures shown

  21. Page 19 Lawrence 3D wheel alignment machine i5 Exquisite movable small cabinet, Height adjustable ruggedized pole, Height Performance computer, 22” LCD monitor, Special target disk, Deluxe clamping wheel clamps, High definition camera, Steering wheel lock, Brake lock, Wedge shaped pads, turn tables, Filler plates for turn tables, Printer and Speaker • 3D max dynamic display system • No electronic components • Four – point wheel clamps • High- speed 3D animation techniques • Reminding window • Pre-tightening rotatable jaw • Pushing the vehicle once • 3D Animated adjustment guidance • Animated operation reminding • Original standard database • Camera showing vehicle on platform • Intelligent voice reminding • Camera and kingpin inclination measurement • Vehicle body dimension measurement • Toe out on turn measurement • Maximum steering measurement • Tyre diameter measurement Jevol RST1600 / RST 1500 Suspension Tester This Ultra-Thin suspension tester is easy to use and designed to be placed on top of the ground or recessed. It is recommended to bolt the unit down, with the wiring fixed or placed in such a way not to get damaged. Drive on ramps can accommodate vehicles up to 80mm ground clearance. This unit comes complete with a PC (all software pre installed), Screen and printer placed into a stylish, lockable cabinet. This suspension tester check the vehicle’s road grip and shock absorber performance according to EUSAMA specifications. It has a auto stop function in case of overload and is designed to use the highest real road vibrations to ensure accurate testing with a low noise design. EUSAMA = European Shock Absorbers. Manufacturers Association BRIGHT SAT – Shock Absorber Tester The tester mainly test low-frequency mechanical vibration, which make use of ultrasonic telemeter principle to detect the movement through a calculated analysis to make the wave re-appear and evaluate its relevant performance. Test Cycle 3 seconds per wheel. Oscillation displayed as a wave. Detect distance 0.25m – 1.5 meter. Measurement distinguishing rate 0.3mm . Results printed on Thermal printer. Charger: 12v/1A +/-10% output. Charging time: 5-6 hours Main Unit dimensions: 161 x 88 x 48.5 mm Weight: 340g Power Supply: 8.4 V Battery Power Consumption: 35mA (without printing) Hours of operation: 48 hours (without printing) Product and colour may vary from pictures shown

  22. Page 20 Screw Compressor Type: AA-SCP1.1/8 Motor 7.5kW/10HP Voltage 380v/50Hz/3PH Capacity(m3/min) 1.1 Working Pressure 8 bar Weight 240 Kg Dimensions 890 x 630 x 920mm Air Dryer Type: AA-10A Motor 1kW Voltage 2200v/50Hz/1PH Capacity(m3/min) 1.5 Working Pressure 8 bar Weight 40 Kg Dimensions 700 x 420 x 760mm Tank Main Filter Type: QPS015 (3 Pcs) Capacity(m3/min) 1.5 Working Pressure 8 bar Weight 1.2kg Height 267.5mm Truck wheel dolly - 500kg Type: 0.6/8 Motor 1kW Capacity(m3/min) 0.6 Working Pressure 8 bar Height 1905mm Truck wheel dolly – Heavy Duty Wheel dolly – roll, lift, twist, lower. Easy installation and de-installation of truck wheel assemblies.1 man control, Heavy-duty industrial bearings. 3 positions for rollers depending on size of wheel. Great tool for every service truck. Avoid damage to wheel bolts and expensive modern rims. For all wheels from 6,5 – 22,5 Product and colour may vary from pictures shown

  23. Contact Persons Hugo Deveugele Director Edgar Julyan Accounts & Stock Fred van Zyl Marketing & Technical Frans Store room Belinah Housekeeper Tel: 012 664 3556

More Related