1 / 6

How to Connect HP Printer Using WPS

Connect HP Printer using WPS BY watching this presentation otherwise Call HP Printer Customer Service 1877-269-4999 and get the solution. For more information visit our website: https://helplinesupport-number.com/<br>

Download Presentation

How to Connect HP Printer Using WPS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Connect HP Printer Using WPS? CALL NOW 1877-269-4999

  2. Step by Step Process to Connect an HP Printer Using WPS Pin: • Please make sure that your router has a WPS button. If yes then move forward with step. • In case it does not have a WPS button, move to FAQs for additional options. • Keep the printer in that place where there is good signal reception. • Keep your printer in the WPS connection mode. • Printers that have touch screen control panel: First of all, open the setup, then Network and then go to Wireless settings menu. After that, select Wi-Fi protected setup. After that, select Push Button and then click on Start.

  3. If your printer machine does not have a touch screen display, hold the button of Wireless for at least 5 seconds and then wait for the wireless light to start flashing. In case you have a Tango printer, then press the wireless button and then press on/off button for 5 seconds. The button is placed at the side of your printer. Wait till the blue light flashes. • In the next two minutes, press the WPS button and hold it for at least 5 seconds or till the connection process starts. • Return to the printer and then see the status of wireless light or bar. In case the blue bar stops blinking, then that means your printer device is connected to the wireless network. Move forward with the next step..

  4. In case the light keeps on blinking and then turns off, then that means no connection has been established. If that happens, move your printer device a little near the router and then perform the same steps again. In case the connection does not work, then move to the FAQ section in the document • Please make sure that your mobile device and computer system is on the same wireless network as your printer machine. • After that, you need to perform the directions for installing drivers and set up Wi-Fi connection.

  5. So, these are the steps that one needs to follow to connect HP Printer through WPS. However, If you are unable to connect it then call HP Printer Customer Service 1877-269-4999 and get the solution. CALL NOW- 1877-269-4999

  6. THANK YOU!! CONTACT US 1877-269-4999

More Related