Choosing the right used plastic injection molding machines is a very important step in establishing a successful plastic injection molding business. Since the machines are used, you cannot be too sure about their condition if you do not check them properly. \n
Choosing the right used plastic injection molding machines is a very important step in establishing a successful plastic injection molding business. Since the machines are used, you cannot be too sure about their condition if you do not check them properly.
Do not just trust the sellers for their word when they tell you that the used machines that they are about to sell you are in good condition. You need to do due diligence and make sure that the machines are tested and proven to be working properly before parting with your hard earned money to pay for them.
So how do you choose the right used plastic injection molding machines that will give you good value for your money? First and foremost, you have to make sure that the machine works. Before it is delivered to your business, it should be fully inspected and tested. If you buy a machine that is not working, you can suffer loss of production because of multiple breakdowns.
You may also end up spending a ridiculously large amount of money to bring back the machine to good working condition. And if the machine has attained its recommended operating age, it may continue breaking down no matter how hard you try to repair it.
Another thing to do so as to choose the right used plastic injection molding machines is to check the screw diameters. Choosing large screw diameters can result into material degradation that will in turn lead to quality problems.
When the large screw diameters are used with small shot sizes, the plastic takes a lot of time to be heated by the barrel heaters as compared to if large shot sizes are used. So make sure that you understand the type of screw that is going to work well with the machine that you will choose to avoid inefficiencies during operation.
You also need to make sure that the injection pressure of the used plastic injection molding machines you want to buy is not limited. In order to continue making quality plastic parts consistently and effectively, the injection pressure of the machine should not be limited.
It is a good idea to choose a machine that has at least ten percent injection pressure in reserve to allow it to adjust automatically to normal variation in the plastic material viscosity. Limited injection pressure can result to short moldings and other problems.
It is also important to make sure that the used plastic injection molding machines do not consume an abnormal amount of energy. The machine should use power efficiently to allow you to save some money on energy bills. If you are a small business owner and the energy bills start rising abnormally, it can prove really difficult to keep the business afloat especially if you are operating on a tight budget.
The design of the machine you will choose will play a significant role in power consumption, so make sure that you take your time to understand the different designs of plastic injection molders that are available before you make your purchase.
For more tips on buying used plastic injection molding machines, visit us today at http://www.premierplasticsnj.com/.
http://www.premierplasticsnj.com Machines For The Money