1 / 27

Terminology and empirical measures General methods to mask faults . Software-fault tolerance

Heisenbugs: A Probabilistic Approach to Availability Jim Gray Microsoft Research http://research.microsoft.com/~gray/Talks/ ½ the slides are not shown (are hidden, so view with PPT to see them all Outline. Terminology and empirical measures General methods to mask faults .

prandy
Download Presentation

Terminology and empirical measures General methods to mask faults . Software-fault tolerance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Heisenbugs:A Probabilistic Approach to AvailabilityJim GrayMicrosoft Researchhttp://research.microsoft.com/~gray/Talks/½ the slides are not shown (are hidden, so view with PPT to see them allOutline • Terminology and empirical measures • General methods to mask faults. • Software-fault tolerance • Summary

  2. Heisenbugs:A Probabilistic Approach to Availability There is considerable evidence that (1) production systems have about one bug per thousand lines of code (2) these bugs manifest themselves in stochastically: failures are due to confluence of rare events, (3) system mean-time-to-failure has a lower bound of a decade or so. To make highly available systems, architects must tolerate these failures by providing instant repair (un-availability is approximated by repair_time/time_to_fail so cutting the repair time in half makes things twice as good. Ultimately, one builds a set of standby servers which have both design diversity and geographic diversity. This minimizes common-mode failures.

  3. Dependability: The 3 ITIES Security Integrity • Reliability / Integrity:does the right thing.(Also large MTTF) • Availability: does it now. (Also small MTTR MTTF+MTTRSystem Availability:if 90% of terminals up & 99% of DB up?(=>89% of transactions are serviced on time). • Holistic vs. Reductionist view Reliability Availability

  4. System Type Unmanaged Managed Well Managed Fault Tolerant High-Availability Very-High-Availability Ultra-Availability Unavailable (min/year) 50,000 5,000 500 50 5 .5 .05 Availability 90.% 99.% 99.9% 99.99% 99.999% 99.9999% 99.99999% Availability Class 1 2 3 4 5 6 7 High Availability System ClassesGoal: Build Class 6 Systems UnAvailability = MTTR/MTBF can cut it in ½ by cutting MTTR or MTBF

  5. Demo: looking at some nodes • Look at http://httpmonitor/ • Internet Node availability: 92% mean, 97% medianDarrell Long (UCSC)ftp://ftp.cse.ucsc.edu/pub/tr/ • ucsc-crl-90-46.ps.Z "A Study of the Reliability of Internet Sites" • ucsc-crl-91-06.ps.Z "Estimating the Reliability of Hosts Using the Internet" • ucsc-crl-93-40.ps.Z "A Study of the Reliability of Hosts on the Internet" • ucsc-crl-95-16.ps.Z "A Longitudinal Survey of Internet Host Reliability"

  6. Sources of Failures MTTF MTTR Power Failure: 2000 hr 1 hr Phone Lines Soft >.1 hr .1 hr Hard 4000 hr 10 hr Hardware Modules: 100,000hr 10hr (many are transient) Software: 1 Bug/1000 Lines Of Code (after vendor-user testing) => Thousands of bugs in System! Most software failures are transient: dump & restart system. Useful fact: 8,760 hrs/year ~ 10k hr/year

  7. Case Studies - Tandem TrendsReported MTTF by Component 1985 1987 1990 SOFTWARE 2 53 33 Years HARDWARE 29 91 310 Years MAINTENANCE 45 162 409 Years OPERATIONS 99 171 136 Years ENVIRONMENT 142 214 346 Years SYSTEM 8 20 21 Years Problem: Systematic Under-reporting

  8. Many Software Faults are Soft After Design Review Code Inspection Alpha Test Beta Test 10k Hrs Of Gamma Test (Production) Most Software Faults Are Transient MVS Functional Recovery Routines 5:1 Tandem Spooler 100:1 Adams >100:1 Terminology: Heisenbug: Works On Retry Bohrbug: Faults Again On Retry Adams: "Optimizing Preventative Service of Software Products", IBM J R&D,28.1,1984 Gray: "Why Do Computers Stop", Tandem TR85.7, 1985 Mourad: "The Reliability of the IBM/XA Operating System", 15 ISFTCS, 1985.

  9. Summary of FT Studies • Current Situation: ~4-year MTTF => Fault Tolerance Works. • Hardware is GREAT (maintenance and MTTF). • Software masks most hardware faults. • Many hidden software outages in operations: • New Software. • Utilities. • Must make all software ONLINE. • Software seems to define a 30-year MTTF ceiling. • Reasonable Goal: 100-year MTTF. class 4 today=>class 6 tomorrow.

  10. Fault Tolerance vs Disaster Tolerance • Fault-Tolerance: mask local faults • RAID disks • Uninterruptible Power Supplies • Cluster Failover • Disaster Tolerance: masks site failures • Protects against fire, flood, sabotage,.. • Redundant system and service at remote site. • Use design diversity

  11. Outline • Terminology and empirical measures • General methods to mask faults. • Software-fault tolerance • Summary

  12. Fault Tolerance Techniques • FAIL FAST MODULES: work or stop • SPARE MODULES : instant repair time. • INDEPENDENT MODULE FAILS by design MTTFPair ~ MTTF2/ MTTR (so want tiny MTTR) • MESSAGE BASED OS: Fault Isolationsoftware has no shared memory. • SESSION-ORIENTED COMM: Reliable messagesdetect lost/duplicate messages coordinate messages with commit • PROCESS PAIRS :Mask Hardware & Software Faults • TRANSACTIONS: give A.C.I.D. (simple fault model)

  13. Example: the FT Bank Modularity & Repair are KEY: vonNeumann needed 20,000x redundancy in wires and switches We use 2x redundancy. Redundant hardware can support peak loads (so not redundant)

  14. Fail-Fast is Good, Repair is Needed Lifecycle of a module fail-fast gives short fault latency High Availability is low UN-Availability Unavailability ­ MTTR MTTF Improving either MTTR or MTTF gives benefit Simple redundancy does not help much.

  15. Outline • Terminology and empirical measures • General methods to mask faults. • Software-fault tolerance • Summary

  16. Key Idea } { } { Architecture Hardware Faults Software Masks Environmental Faults Distribution Maintenance • Software automates / eliminates operators So, • In the limit there are only software & design faults.Software-fault tolerance is the key to dependability. INVENT IT!

  17. Software Techniques: Learning from Hardware Recall that most outages are not hardware. Most outages in Fault Tolerant Systems are SOFTWARE Fault Avoidance Techniques: Good & Correct design. After that: Software Fault Tolerance Techniques: Modularity (isolation, fault containment) Design diversity N-Version Programming: N-different implementations Defensive Programming: Check parameters and data Auditors: Check data structures in background Transactions: to clean up state after a failure Paradox: Need Fail-Fast Software

  18. Fail-Fast and High-Availability Execution Software N-Plexing: Design Diversity N-Version Programming Write the same program N-Times (N > 3) Compare outputs of all programs and take majority vote Process Pairs: Instant restart (repair) Use Defensive programming to make a process fail-fast Have restarted process ready in separate environment Second process “takes over” if primary faults Transaction mechanism can clean up distributed state if takeover in middle of computation.

  19. What Is MTTF of N-Version Program? First fails after MTTF/N Second fails after MTTF/(N-1),... so MTTF(1/N + 1/(N-1) + ... + 1/2) harmonic series goes to infinity, but VERY slowly for example 100-version programming gives ~4 MTTF of 1-version programming Reduces variance N-Version Programming Needs REPAIR If a program fails, must reset its state from other programs. => programs have common data/state representation. How does this work for Database Systems? Operating Systems? Network Systems? Answer: I don’t know.

  20. Why Process Pairs Mask Faults:Many Software Faults are Soft After Design Review Code Inspection Alpha Test Beta Test 10k Hrs Of Gamma Test (Production) Most Software Faults Are Transient MVS Functional Recovery Routines 5:1 Tandem Spooler 100:1 Adams >100:1 Terminology: Heisenbug: Works On Retry Bohrbug: Faults Again On Retry Adams: "Optimizing Preventative Service of Software Products", IBM J R&D,28.1,1984 Gray: "Why Do Computers Stop", Tandem TR85.7, 1985 Mourad: "The Reliability of the IBM/XA Operating System", 15 ISFTCS, 1985.

  21. Process Pair Repair Strategy If software fault (bug) is a Bohrbug, then there is no repair “wait for the next release” or “get an emergency bug fix” or “get a new vendor” If software fault is a Heisenbug, then repair is reboot and retry or switch to backup process (instant restart) PROCESS PAIRS Tolerate Hardware Faults Heisenbugs Repair time is seconds, could be mili-seconds if time is critical Flavors Of Process Pair: Lockstep Automatic State Checkpointing Delta Checkpointing Persistent

  22. How Takeover Masks Failures Server Resets At Takeover But What About Application State? Database State? Network State? Answer: Use Transactions To Reset State! Abort Transaction If Process Fails. Keeps Network "Up" Keeps System "Up" Reprocesses Some Transactions On Failure

  23. PROCESS PAIRS - SUMMARY Transactions Give Reliability Process Pairs Give Availability Process Pairs Are Expensive & Hard To Program Transactions + Persistent Process Pairs => Fault Tolerant Sessions & Execution When Tandem Converted To This Style Saved 3x Messages Saved 5x Message Bytes Made Programming Easier

  24. SYSTEM PAIRSFOR HIGH AVAILABILITY Primary Backup Programs, Data, Processes Replicated at two sites. Pair looks like a single system. System becomes logical concept Like Process Pairs: System Pairs. Backup receives transaction log (spooled if backup down). If primary fails or operator Switches, backup offers service.

  25. SYSTEM PAIR BENEFITS Protects against ENVIRONMENT: weather utilities sabotage Protects against OPERATOR FAILURE: two sites, two sets of operators Protects against MAINTENANCE OUTAGES work on backup software/hardware install/upgrade/move... Protects against HARDWARE FAILURES backup takes over Protects against TRANSIENT SOFTWARE ERRORR Allows design diversity different sites have different software/hardware)

  26. Key Idea } { } { Architecture Hardware Faults Software Masks Environmental Faults Distribution Maintenance • Software automates / eliminates operators So, • In the limit there are only software & design faults. Many are HeisenbugsSoftware-fault tolerance is the key to dependability. INVENT IT!

  27. References Adams, E. (1984). “Optimizing Preventative Service of Software Products.” IBM Journal of Research and Development. 28(1): 2-14.0 Anderson, T. and B. Randell. (1979). Computing Systems Reliability. Garcia-Molina, H. and C. A. Polyzois. (1990). Issues in Disaster Recovery. 35th IEEE Compcon 90. 573-577. Gray, J. (1986). Why Do Computers Stop and What Can We Do About It. 5th Symposium on Reliability in Distributed Software and Database Systems. 3-12. Gray, J. (1990). “A Census of Tandem System Availability between 1985 and 1990.” IEEE Transactions on Reliability. 39(4): 409-418. Gray, J. N., Reuter, A. (1993). Transaction Processing Concepts and Techniques. San Mateo, Morgan Kaufmann. Lampson, B. W. (1981). Atomic Transactions. Distributed Systems -- Architecture and Implementation: An Advanced Course. ACM, Springer-Verlag. Laprie, J. C. (1985). Dependable Computing and Fault Tolerance: Concepts and Terminology. 15’th FTCS. 2-11. Long, D.D., J. L. Carroll, and C.J. Park (1991). A study of the reliability of Internet sites. Proc 10’th Symposium on Reliable Distributed Systems, pp. 177-186, Pisa, September 1991. Darrell Long, Andrew Muir and Richard Golding, ``A Longitudinal Study of Internet Host Reliability,'' Proceedings of the Symposium on Reliable Distributed Systems, Bad Neuenahr, Germany: IEEE, September 1995, pp. 2-9

More Related