1 / 12

Status of the Calibration

Status of the Calibration. Markus Gaug. IFAE. Udine Bootcamp, 19. April 2004. General overview and status Deeper look into the calibration: Calibration procedure Pedestal subtraction Oscillating signals Plans for the next two months Conclusions, propositions for this bootcamp.

pooky
Download Presentation

Status of the Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status of the Calibration Markus Gaug IFAE Udine Bootcamp, 19. April 2004 • General overview and status • Deeper look into the calibration: • Calibration procedure • Pedestal subtraction • Oscillating signals • Plans for the next two months • Conclusions, propositions for this bootcamp.

  2. 1. Current status hardware: • IFAE Pulser box: After successful installation of optical trigger transmission seems to fully work, except when there is high humidity. • Calibration triggers: Fixed trigger to L2 by separate delayed line, no majority trigger any more, no more cosmics in calibration data. • CT1 Pulser box: Left on the telescope, 10cm closer to box, but trigger cable used by AMC video camera. • Blind Pixel: Seems to be repared, but signals much too long, not yet solved. • PIN Diode: Will be installed in May, new optical read-out.

  3. Current Status Software: • Data until March 04: Software fully available, stable and documented. Has to be calibrated with F-Factor method. • Data from March-May 04: Software fully available and documented. Has to be calibrated with F-Factor method, calibration colour has to be written in file name. • Data from May 04 onwards: Need to write interaction with digital modules, intensity calibration missing.

  4. 2. Deeper look into Software: • Calibration Procedure: Signal extraction and calculation of calibration constants like decided on the Wuerzburg bootcamp. • New: Treatment of Quantum Efficiency: Calculate for each of the three methods a photons flux. Divided by the number of phe´s gives the quantum efficiency, stored in MCalibrationQECam. This class is filled and merged with the calibrations of different colours. • Calibration Procedure: Signal extraction and calculation of calibration constants like decided on the Wuerzburg bootcamp. • New: Treatment of Quantum Efficiency: Calculate for each of the three methods a photons flux. Divided by the number of phe´s gives the quantum efficiency, stored in MCalibrationQECam. This class is filled and merged with the calibrations of different colours and a global QE for cascades is derived. • New: Treatment of Bad Pixels: Continuously, an MBadPixelsCam is filled and merged. • Calibration Procedure: Signal extraction and calculation of calibration constants like decided on the Wuerzburg bootcamp.

  5. 2. Calibration Procedure (II.) • Once, Digital Modules installed: • One intensity and QE calibration at the beginning of the night: • MIntensityCam: Conversion factors, High-Low Gain conversion, dep. on intensity • MCalibrationQECam: Quantum efficiencies, merging of different colour calibrations, different methods. • MBadPixelsCam: Select already the bad of the bad ones. • Every 5-10 mintutes calibration with low intensity: • Update conversion factors • Monitor quantum efficiencies • Once, Digital Modules installed: • One intensity and QE calibration at the beginning of the night: • MIntensityCam: Conversion factors, High-Low Gain conversion, dep. on intensity • MCalibrationQECam: Quantum efficiencies, merging of different colour calibrations, different methods. • MBadPixelsCam: Select already the bad of the bad ones. • Every 5-10 mintutes calibration with low intensity: • Update conversion factors • Monitor quantum efficiencies

  6. 2. Pedestal subtraction • Now: Calculate pedestal and ped. RMS on the sums of 14 FADC slices (MPedCalcPedRun) and transform: • Mean Pedestal/slice = Mean of sums / number of slices • Pedestal RMS/slice = RMS of sums / sqrt(nr. slices) • Check: Are these relations true?

  7. 2. Changing behaviour over time • Sometimes, calibration constants seem to look nice, but:

  8. 2. Oscillations • All runs analysed so far, seem to oscillate at low frequency:

  9. 3. Plans for the next 2 months • May at La Palma: • Installation of PIN Diode • Installation of the digital modules • Readjustment of calib. Trigger (pre-scaler delay) • Define standard calibration procedure in Arehucas • May/June at Barcelona: • Implementation of MIntensityCam and lecture of DMs • Combination of colour measurements • Update Tdas0204 – full documentation of calibration algorithms

  10. 4. Conclusions • For analysis of February and March data, charge and rel. time calibration is fully implemented. • Classes are documented now. • Need systematic check of all the data • In May last major update of in calibration hardware. • Pedestals Oscillate!!! • DAQ reads out the pulses too late (since March) • Need to re-define the way, pedestal RMS are calculated.

  11. 5. Propositions for this bootcamp • Decide how to calculate Pedestal RMS. • Define one standard signal extractor. • Put standardized code into classes (examples: MJPedestal, MJCalibration, …) • Define how to monitor the camera stability and calibration constants, already inside one run. • Automatize the way to pick the right pedestal and calibration files. • Connection to Database. • Code test bench

More Related