1 / 31

Magnetic Flux and Faraday's Law of Induction

Learn about how changing magnetic fields induce currents in coils and the principles behind Faraday's Law of Induction.

phall
Download Presentation

Magnetic Flux and Faraday's Law of Induction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Walker, Chapter 23Magnetic Flux and Faraday’s Law of Induction

  2. Magnetic Induction Demonstrations • Ammeter for overhead projector which measures the current in a coil. Under what circumstances is a current induced in the coil? How do we get the largest current? • Disk launcher with • Al ring • Slit ring • Fe ring • Bakelite ring • coils with bulbs

  3. Electric Currents produce Magnetic Fields Chapter 22: Electric currents (in a wire, in a plasma, in a fluid solution, inside an atom) produce a disturbance in the surrounding space called the magnetic field. This magnetic field produces forces on any other macroscopic or microscopic currents. Example: MRI: Magnetic field (several Tesla) from superconducting solenoid induces a net alignment of the microscopic currents inside each and every proton at the center of the Hydrogen atoms in your body

  4. Induced emf (Voltage) from changing Magnetic Flux Electric currents produce magnetic fields. 19th century puzzle: Can magnetic fields produce currents? A static magnet will produce no current in a stationary coil. Faraday: If the magnetic field changes, or if the magnet and coil are in relative motion, there will be an induced emf (and therefore current) in the coil. Key Concept: The magnetic flux through the coil must change. This will induce an emf e in the coil, which produces a current I = e/R in the coil. Such a current is said to be induced by the varying B-field.

  5. Magnetic Flux For a “loop” of wire (not necessarily circular) with area A, in an external magnetic field B,the magnetic flux is: A = area of loop q = angle between B and the normal to the loop SI units of Magnetic Flux: 1 T·m2 = 1 weber = 1 Wb

  6.   •   •           Current Loop Reminder: Current in a loop generates a magnetic field (and therefore magnetic flux). The magnetic field generated by this current is into the page inside the loop, and out of the page outside the loop. RHR: Point your (right-hand) thumb along the direction of the current. Your fingers point in the direction of the magnetic field (and the magnetic flux). OR Curl your fingers around the loop in the direction of the current. Your (right-hand) thumb points in the direction of the magnetic field this current generates through the loop.

  7. Walker Problem 3, pg. 778 A magnetic field is oriented at an angle of 32º to the normal of a rectangular area 5.5 cm by 7.2 cm. If the magnetic flux through this surface has a magnitude of 4.8  10-5 T·m2, what is the strength of the magnetic field?

  8. Faraday’s Law of Induction Faraday’s Law: The instantaneous emf in a circuit (w/ N loops) equals the rate of change of magnetic flux through the circuit: The minus sign indicates the direction of the induced emf. To calculate the magnitude:

  9. Examples of Induced Current Any change of current in primary induces a current in secondary.

  10. Induced Current • The current in the primary polarizes the material of the core. • The magnetic field of the primary solenoid is enhanced by the magnetic field produced by these atomic currents. • This magnetic field remains confined in the iron core, and only fans out and loops back at the end of the core. • Any change in the current in the primary (opening or closing switch) produces a change in the magnetic flux through the secondary coil. This induces a current in the secondary.

  11. Induction by Relative Motion v • When a permanent magnet moves relative to a coil, the magnetic flux through the coil changes, inducing an emf in the coil. • In a) the magnitude of the flux is increasing • In c) the flux is decreasing in magnitude. • In a) and c) the induced current has opposite sign. v

  12. Induction by Rotational Motion As a coil rotates in a constant magnetic field (uniform or not) the flux through the loop changes, inducing an emf in the coil.

  13. Walker Problem 10, pg. 778 This is a plot of the magnetic flux through a coil as a function of time. At what times shown in this plot does (a) the magnetic flux and (b) the induced emf have the greatest magnitude?

  14. Walker Problem 9, pg. 778 A 0.25 T magnetic field is perpendicular to a circular loop of wire with 50 turns and a radius 15 cm. The magnetic field is reduced to zero in 0.12 s. What is the magnitude of the induced emf?

  15. S N Induced B field Induced current Lenz’s Law Lenz’s Law: An induced current always flows in a direction that opposes the change that caused it. Magnet moving down toward loop In this example the magnetic field in the downward direction through the loop is increasing. So a current is generated in the loop which produces an upward magnetic field inside the loop to oppose the change.

  16. Walker Problem 24, pg. 779 The figure shows a circuit containing a resistor and an uncharged capacitor. Pointing into the plane of the circuit is a uniform magnetic field B. If the magnetic field increases in magnitude with time, which plate of the capacitor (top or bottom) becomes positively charged?

  17. Motional emf An emf will also be produced if a conductor moves through a magnetic field. The emf comes from the motion of charges, which are free to move in the conductor. In this example, why does the top of the rod become positively charged? x + x x x x x + x x x x x x L v - - x x x x x x

  18. x x x x x x R x x x x x x L v x x x x x x If the moving conductor is part of a circuit, the flux through the circuit will change with time and a current will be induced (Area of loop = Ls): s

  19. Walker Problems 30-31, pg. 780 The figure shows a zero-resistance rod sliding to the right on two zero-resistance rails separated by the distance L = 0.45 m. The rails are connected by a 12.5 W resistor, and the entire system is in a uniform magnetic field with a magnitude of 0.75 T. (a) If the velocity of the bar is 5.0 m/s to the right, what is the current in the circuit? (b) What is the direction of the current in the circuit? (c) What is the magnetic force on the bar? (d) What force must be applied to keep the bar moving at constant velocity?

  20.                    Eddy Currents When a conductor is moved in a magnetic field, there is a force on the electrons, which then move in the metal. This movement is called an eddy current. The induced currents cause magnetic fields which tend to oppose the motion of the metal.

  21. Generators A generator converts mechanical energy to electrical energy. Consider a current loop which rotates in a constant magnetic field: The magnetic flux through the loop changes, so an emf is induced. If a loop of area A with N turns rotates with angular speed w (period of rotation = 2p/w) in a constant B field, then the instantaneous induced emf is: • = NBAw sin(wt) If this loop is part of a circuit, this emf will induce anAlternating Current (AC)in the circuit.

  22. Generator A coil of wire turns in a magnetic field. The flux in the coil is constantly changing, generating an emf in the coil.

  23. Self-Inductance If you try to change the current in a circuit instantaneously, the response will instead be gradual. This is because the circuit produces a self-induced emfto initially oppose any changes as prescribed by Lenz’s Law. This effect is known as self-induction. This does not violate the Newtonian principle of no-self-forces, because in effect individual electrons in the current are exerting forces on the other electrons in the same circuit.

  24. Inductance The self induced emf is given by: where L is called the inductance of the circuit. The magnetic flux through the loop, produced by current in the loop, is proportional to the current. The inductance L is the constant of proportionality. The unit of inductance is the Henry 1 H = 1 T·m2/A = 1 (T·m2/s) (s/A) = 1 V·s/A Note that inductance, like capacitance, is purely geometrical.

  25. Inductance of a Solenoid A solenoid has inductance given by L = inductance of the solenoid N = # of turns in solenoid l = length of solenoid A = cross sectional area of solenoid n = # of turns per unit length

  26. Walker Problem 41, pg. 780 The inductance of a solenoid with 450 turns and a length of 24 cm is 7.3 mH. (a) What is the cross-sectional area of the solenoid? (b) What is the induced emf in the solenoid if its current drops from 3.2 A to 0 in 55 ms?

  27. RL Circuits We can construct a circuit from inductors and resistors. The circuit will behave just like an RC circuit, with a time constant given by: t = L/R

  28. Walker Problem 45, pg. 780 (a) How long does it take for the current in an RL circuit with R = 130 W and L = 63 mH to reach half its final value? (b) If the emf in the circuit is 10 V, what is the current in this circuit two characteristic time intervals after closing the switch?

  29. Energy Stored in an Inductor Just as energy can be stored in a capacitor (recall that U= ½CV2), energy can also be stored in an inductor: U = ½LI2 Whereas energy in a capacitor is stored in the electric field between the plates, energy in an inductor is stored in the magnetic field within the inductor.

  30. Transformers A transformer is a device used to change the voltage in a circuit. AC currents must be used. 120 V in your house 75,000 V in the power lines p = primary s = secondary

  31. Walker Problem 57, pg. 781 A disk drive plugged into a 120-V outlet operates on a voltage of 9.0 V. The transformer that powers the disk drive has 125 turns on its primary coil. (a) Should the number of turns on the secondary coil be greater than or less than 125? (b) Find the number of turns on the secondary coil.

More Related