1 / 15

Plastic Optical Materials

Plastic Optical Materials. Sheng-Huei Derek Lu College of Optical Sciences University of Arizona. Apple iPhone 4 Camera Lens. Apple iPhone 4 Camera Specs: 5.0 Mpixels (2592 x 1936) 3.85 mm lens focal length f/2.8 lens aperture Equivalent 35mm film camera 30 mm f/22

petrus
Download Presentation

Plastic Optical Materials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Plastic Optical Materials Sheng-Huei Derek Lu College of Optical Sciences University of Arizona

  2. Apple iPhone 4 Camera Lens • Apple iPhone 4 Camera Specs: • 5.0 Mpixels (2592 x 1936) • 3.85 mm lens focal length • f/2.8 lens aperture • Equivalent 35mm film camera • 30 mm f/22 Sample image is 2592x1936 pixels (5.0 MP, 4.02:3) • Don't throw away your FourThird, APS-C or full frame SLR  Cost is Everything!!

  3. iPhone 4 Camera Module • Glass cell phone lenses cost $20-$40 in the market. • Plastic cost: $3.55 only • Manufacturer: Largan Precision Co., LTD, Taiwan • Product#: 9457F • Composition:4 Plastic Elements • Very high production volumes • Injection Molding: 8-Holes Method • 8 cavities at the same time • Monthly volume = 207,306 parts

  4. Outlines • Plastic optical material application • Advantages • Disadvantages • Issues: • Structural Stability • Thermal Stability • Moisture Absorption • Injection Molding • Wavefont error budget • Reference

  5. What are optical elements made of plastic? • Cellphone/ NB/ Car/ Camera Lens • Bar code scanners in CD players • Prisms • LED collimator • Diffractive Optical Elements

  6. Main Advantages • Cost • Production volume • Weight reduction • Aspheric and diffractive surfaces • Integral features – can have mounting features or multifunction parts

  7. Disadvantages • Lower service temperature than glass - max service 80-130 ºC • Low structural stability - soft, larger deflection while applying force, lower resonant frequency than glass • Poor thermal properties – high dn/dT, high CTE • Moisture Absorption • Limited material selection

  8. Material Properties of Plastic Optical Element

  9. Plastic Element Structural Stability • ρ = 1 g/cm3, E = 3 Gpa(glass: ρ=2.5 g/cm3, E=80 Gpa) • Resonant frequency • Plastic with 1/3 resonant frequency than glass • Deflection per thickness • Plastic with 10 times deflection than glass

  10. Plastic Element Thermal Stability • dn/dT = -8.5 ppm/ºC, CTE = 72 ppm/ºC, λ = 0.21 W/mK (glass: dn/dT = 1.86 ppm/ºC, CTE = 7 ppm/ºC, λ = 1 W/mK) • Defocus due to one degree change • β = 89 ppm/ºC for plastic, β = 3.28 ppm/ºC for glass • Linear thermal distortion of a constant heat flux Φ • Plastic with 50 times thermal deflection than glass

  11. Moisture Absorption • Water absorption: change of volume, change of refractive index • The coefficient of moisture expansion (CME) for PMMA is about 0.5% • The change of refractive index for PMMA is about 900 ppm • Cycloolefin Polymer (COP) and Cycloolefin Copolymer (COC) are known as low moisture absorption.

  12. Injection Molding • Surface Imperfections - Melt temperature is too high to cause gas evolution: bubbles - Pressure is too low to cause incomplete filling of mold. • Shrinkage - If the part thickness is too thin, part will shrink while cooling. - Applying holding pressure is maintained to compensate for material shrinkage

  13. Tolerance Analysis: wavefont error budget for the plastic optical component 1 mold costs $200,000!

  14. Reference • Selected plastic optical material characteristics are listed in my tutorial: “Tutorial for Plastic Optical Materials” • Great reference book: Stefan Bȁumer etc. “Hand Book of Plastic Optics”, 2005 WILEY • Formulas: Prof. Burge, Opti 521/421 class note

More Related