1 / 17

Maxwell’s Equations

Maxwell’s Equations. PH 203 Professor Lee Carkner Lecture 25. Transforming Voltage. We often only have a single source of emf We need a device to transform the voltage Note that the flux must be changing, and thus the current must be changing Transformers only work for AC current.

percy
Download Presentation

Maxwell’s Equations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Maxwell’s Equations PH 203 Professor Lee Carkner Lecture 25

  2. Transforming Voltage • We often only have a single source of emf • We need a device to transform the voltage • Note that the flux must be changing, and thus the current must be changing • Transformers only work for AC current

  3. Basic Transformer • The emf then only depends on the number of turns in each e = N(DF/Dt) Vp/Vs = Np/Ns • Where p and s are the primary and secondary solenoids

  4. Transformers and Current • If Np > Ns, voltage decreases (is stepped down) • Energy is conserved in a transformer so: • IpVp = IsVs • Decrease V, increase I

  5. Transformer Applications • Voltage is stepped up for transmission • Since P = I2R a small current is best for transmission wires • Power pole transformers step the voltage down for household use to 120 or 240 V

  6. Maxwell’s Equations • In 1864 James Clerk Maxwell presented to the Royal Society a series of equations that unified electricity and magnetism and light • ∫ E ds = -dFB/dt • ∫ B ds = m0e0(dFE/dt) + m0ienc • ∫ E dA = qenc/e0 • Gauss’s Law for Magnetism • ∫ B dA = 0

  7. Faraday’s Law • ∫ E ds = -dFB/dt • A changing magnetic field induces a current • Note that for a uniform E over a uniform path, ∫ E ds = Es

  8. Ampere-Maxwell Law • ∫ B ds = m0e0(dFE/dt) + m0ienc • The second term (m0ienc) is Ampere’s law • The first term (m0e0(dFE/dt)) is Maxwell’s Law of Induction • So the total law means • Magnetic fields are produced by changing electric flux or currents

  9. Displacement Current • We can think of the changing flux term as being like a “virtual current”, called the displacement current, id id = e0(dFE/dt) ∫ B ds = m0id + m0ienc

  10. Displacement Current in Capacitor • So then dFE/dt = A dE/dt or id = e0A(dE/dt) • which is equal to the real current charging the capacitor

  11. Displacement Current and RHR • We can also use the direction of the displacement current and the right hand rule to get the direction of the magnetic field • Circular around the capacitor axis • Same as the charging current

  12. Gauss’s Law for Electricity • ∫ E dA = qenc/e0 • The amount of electric force depends on the amount and sign of the charge • Note that for a uniform E over a uniform area, ∫ E dA = EA

  13. Gauss’s Law for Magnetism • ∫ B dA = 0 • The magnetic flux through a surface is always zero • Since magnetic fields are always dipolar

  14. Next Time • Read 32.6-32.11 • Problems: Ch 32, P: 32, 37, 44

  15. How would you change R, C and w to increase the rms current through a RC circuit? • Increase all three • Increase R and C, decrease w • Decrease R, increase C and w • Decrease R and w, increase C • Decrease all three

  16. How would you change R, L and w to increase the rms current through a RL circuit? • Increase all three • Increase R and L, decrease w • Decrease R, increase L and w • Decrease R and w, increase L • Decrease all three

  17. How would you change R, L, C and w to increase the rms current through a RLC circuit? • Increase all four • Decrease w and C, increase R and L • Decrease R and L, increase C and w • Decrease R and w, increase L and C • None of the above would always increase current

More Related