1 / 33

Engineering Analysis ENG 3420 Fall 2009

Engineering Analysis ENG 3420 Fall 2009. Dan C. Marinescu Office: HEC 439 B Office hours: Tu-Th 11:00-12:00. Lecture 22. Attention: The last homework HW5 and the last project are due on Tuesday November 24!! Last time: Linear regression

pennib
Download Presentation

Engineering Analysis ENG 3420 Fall 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering Analysis ENG 3420 Fall 2009 Dan C. Marinescu Office: HEC 439 B Office hours: Tu-Th 11:00-12:00

  2. Lecture 22 Attention: The last homework HW5 and the last project are due on Tuesday November 24!! Last time: Linear regression Exponential, power, and saturation non-linear models Linear least squares regression Today Linear regression versus sample mean. Coefficient of determination Polynomial least squares fit Multiple linear regression General linear squares More on non-linear models Interpolation (Chapter 15) Polynomial interpolation Newton interpolating polynomials Lagrange interpolating polynomials Next Time Splines Lecture 22 2

  3. Quantification of Errors • For a straight line the sum of the squares of the estimate residuals is: • The standard error of the estimate:

  4. Linear regression versus the sample mean • What is the difference between linear regression and the case when we simply compute the sample mean and draw a line corresponding to the sample mean? • The spread  the histogram of the differences between the values predicted by linear regression and the actual sample values. • Regression data showing (a) the spread of data around the mean of the dependent data and (b) the spread of the data around the best fit line: • The reduction in spread represents the improvement due to linear regression.

  5. Coefficient of Determination • The coefficient of determinationr2 • r2 represents the percentage of the original uncertainty explained by the model. • For a perfect fit, Sr=0 and r2=1. • If r2=0, there is no improvement over simply picking the mean. • If r2<0, the model is worse than simply picking the mean!

  6. Example 88.05% of the original uncertaintyhas been explained by the linear model

  7. Polynomial least-fit squares • MATLAB has a built-in function polyfit that fits a least-squares n-th order polynomial to data: • p = polyfit(x, y, n) • x: independent data • y: dependent data • n: order of polynomial to fit • p: coefficients of polynomialf(x)=p1xn+p2xn-1+…+pnx+pn+1 • MATLAB’s polyval command can be used to compute a value using the coefficients. • y = polyval(p, x)

  8. Fitting an mth order polynomial to n data points • Minimize: • The standard error is: because the mth order polynomial has (m+1) coefficients. • The coefficient of determination r2 is:

  9. Multiple Linear Regression • Now y is a linear function of two or more independent variables. • The best fit minimize the sum of the squares of the estimate residuals: • For example when: instead of a line we have a plane

  10. General Linear Least Squares • Linear, polynomial, and multiple linear regression all belong to the general linear least-squares model:where z0, z1, …, zm are a set of m+1 basis functions and e is the error of the fit. • The basis functions can be any function data but cannot contain any of the coefficients a0, a1, etc. • The equation can be re-written for each data point as a matrix equation: where {y} is a vector of n dependent data, {a} is a vector of (m+1) coefficients of the equation, {e} contains the error at each point, and [Z] is: • with zji representing the value of the jth basis function calculated at the ith point.

  11. Solving General Linear Least Squares Coefficients • Generally, [Z] is an n x (m+1) matrix. Simple inversion cannot be used to solve for the (m+1) {a}. Instead the sum of the squares of the estimate residuals is minimized: • The outcome of this minimization yields:

  12. Example • Given the colum vectors x and y, find the coefficients for best fit line y=a0+a1x+a2x2 Z = [ones(size(x) x x.^2] a = (Z’*Z)\(Z’*y) • MATLAB’s left-divide will automatically include the [Z]T terms if the matrix is not square, so a = Z\ywould work as well • To calculate measures of fit: St = sum((y-mean(y)).^2) Sr = sum((y-Z*a).^2) r2 = 1-Sr/St syx = sqrt(Sr/(length(x)-length(a)))

  13. Nonlinear Models • How to deal with nonlinear models (when we cannot fit a straight line) to the sample data • Transform the variables and solve for the best fit of the transformed variables. This works well for exponential, power, saturation models but not all equations can be transformed easily or at all. • Perform nonlinear regression to directly determine the least-squares fit. • To perform nonlinear regression: • write a function that returns the sum of the squares of the estimate residuals for a fit and then • use fminsearch function to find the values of the coefficients where a minimum occurs. • The arguments to the function to compute Sr should be the coefficients, the independent variables, and the dependent variables.

  14. Example • Given two vectors of n observations ym for the force F and xm for the velocity v find the coefficients a0 and a1 for the best fit of the equation: • First - write a function called fSSR.m containing the following: function f = fSSR(a, xm, ym) yp = a(1)*xm.^a(2); f = sum((ym-yp).^2); • Use fminsearch in the command window to obtain the values of a that minimize fSSR: a = fminsearch(@fSSR, [1, 1], [], v, F) where [1, 1] is an initial guess for the [a0, a1] vector, [] is a placeholder for the options

  15. Comparison between the transformed of the power equation and the direct method in our example • In the general case the two methods produce different results (the coefficients of the equations are different). The direct method produces the largest r2.

  16. Polynomial Interpolation • Problem estimate intermediate values between precise data points. • Related to data fitting but • The function uses to interpolate must pass through the data points - this makes interpolation more restrictive than fitting. • Polynomial interpolation  an (n-1)th order polynomial is found that passes through n data points: • How to find the coefficients of the polynomial • Use linear algebra to solve a system of n linear equations. • Use polyfit and polyval built-in functions. Making sure the order of the fit for n data points is n-1.

  17. Matrix formulation of polynomial interpolation: find the coefficients p1, p2 … pn knowing the values of the function f(x1),f(x2)…f(xn)

  18. Ill conditioned linear problems • A matrix is ill-conditioned if small changes in the coefficients of the solution have drastic effects on the results, which makes iterating the solution to a small residual a tricky operation. • Another type of ill-conditioned matrix is when we have matrix values that vary by several degrees of magnitude.  • Numerical round-off in the system can be challenging for solving a model having an ill-conditioned matrix.

  19. Problems • Vandermonde matrices are very ill-conditioned  their solutions are very sensitive to round-off errors. • Matrices such as that on the left are known as The issue can be minimized by scaling and shifting the data.

  20. Newton Interpolating Polynomials • The differences between a simple polynomial and Newton’s interpolating polynomial for first and second order interpolations are:

  21. First-order Newton interpolating polynomial • The first-order Newton interpolating polynomial may be obtained from linear interpolation and similar triangles, as shown. • The resulting formula based on known points x1 and x2 and the values of the dependent function at those points is:

  22. Second-order Newton interpolating polynomial • The second-order Newton interpolating polynomial introduces some curvature to the line connecting the points, but still goes through the first two points. • The resulting formula based on known points x1, x2, and x3 and the values of the dependent function at those points is:

  23. Newton interpolating polynomial of degree n-1 • In general, an (n-1)th Newton interpolating polynomial has all the terms of the (n-2)th polynomial plus one extra. • The general formula is: • where • and the f[…] represent divided differences.

  24. Divided differences • Divided difference are calculated as follows: • Divided differences are calculated using divided difference of a smaller number of terms:

  25. Lagrange interpolating polynomials • Another method that uses shifted value to express an interpolating polynomial is the Lagrange interpolating polynomial. • The differences between a simply polynomial and Lagrange interpolating polynomials for first and second order polynomials is: where the Li are weighting coefficients that are functions of x.

  26. First-order Lagrange interpolating polynomial • The first-order Lagrange interpolating polynomial may be obtained from a weighted combination of two linear interpolations, as shown. • The resulting formula based on known points x1 and x2 and the values of the dependent function at those points is:

  27. Lagrange interpolating polynomial for n points • In general, the Lagrange polynomial interpolation for n points is: • where Li is given by:

  28. Inverse Interpolation • Interpolation general means finding some value f(x) for some x that is between given independent data points. • Sometimes, it will be useful to find the x for which f(x) is a certain value - this is inverse interpolation. • Rather than finding an interpolation of x as a function of f(x), it may be useful to find an equation for f(x) as a function of x using interpolation and then solve the corresponding roots problem:f(x)-fdesired=0 for x.

  29. Extrapolation • Extrapolation is the process of estimating a value of f(x) that lies outside the range of the known base points x1, x2, …, xn. • Extrapolation represents a step into the unknown, and extreme care should be exercised when extrapolating!

  30. Extrapolation Hazards • The following shows the results of extrapolating a seventh-order population data set:

  31. Oscillations • Higher-order polynomials can not only lead to round-off errors due to ill-conditioning, but can also introduce oscillations to an interpolation or fit where they should not be. • In the figures below, the dashed line represents an function, the circles represent samples of the function, and the solid line represents the results of a polynomial interpolation:

More Related