1 / 25

SiO 2 ETCH PROPERTY CONTROL USING PULSE POWER IN CAPACITIVELY COUPLED PLASMAS * Sang-Heon Song a) and Mark J. Kushner

SiO 2 ETCH PROPERTY CONTROL USING PULSE POWER IN CAPACITIVELY COUPLED PLASMAS * Sang-Heon Song a) and Mark J. Kushner b) a) Department of Nuclear Engineering and Radiological Sciences University of Michigan, Ann Arbor, MI 48109, USA ssongs@umich.edu

penney
Download Presentation

SiO 2 ETCH PROPERTY CONTROL USING PULSE POWER IN CAPACITIVELY COUPLED PLASMAS * Sang-Heon Song a) and Mark J. Kushner

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SiO2 ETCH PROPERTY CONTROL USING PULSE POWER IN CAPACITIVELY COUPLED PLASMAS* Sang-Heon Songa) and Mark J. Kushnerb) a)Department of Nuclear Engineering and Radiological Sciences University of Michigan, Ann Arbor, MI 48109, USA ssongs@umich.edu b)Department of Electrical Engineering and Computer Science University of Michigan, Ann Arbor, MI 48109, USA mjkush@umich.edu http://uigelz.eecs.umich.edu Nov. 2011 AVS * Work supported by DOE Plasma Science Center and Semiconductor Research Corp.

  2. University of Michigan Institute for Plasma Science & Engr. AGENDA • Motivation for controllingf(e) • Description of the model • Typical Ar/CF4/O2 pulsed plasma properties • Etch rate with variable blocking capacitor • Etch property with different PRF • Etch rate, profile, and selectivity • Concluding Remarks SHS_MJK_AVS

  3. k CF3 + F + e e + CF4 University of Michigan Institute for Plasma Science & Engr. CONTROL OF ELECTRON KINETICS–f() • Controlling the generation of reactive species for technological devices benefits from customizing the electron energy (velocity) distribution function. SHS_MJK_AVS

  4. University of Michigan Institute for Plasma Science & Engr. ETCH RATE vs. FLUX RATIOS • Large fluorine to ion flux ratio enhances etching yield of Si. • Large fluorocarbon to ion flux ratio reduces etching yield of Si. Etching Yield (Si/Ar+) Etching Yield (Si/Ar+) Flux Ratio (F/Ar+) Flux Ratio (CF2/Ar+) Ref: D. C. Gray, J. Butterbaugh, and H. H. Sawin, J. Vac. Sci. Technol. A 9, 779 (1991) SHS_MJK_AVS

  5. p-Si p-Si University of Michigan Institute for Plasma Science & Engr. ETCH PROFILE vs. FLUX RATIOS • Large chlorine radical to ion flux ratio produces an undercut in etch profile. • Etch profile result in ECR Cl2 plasma after 200% over etch with different flux ratios • Flux Ratio (Cl / Ion) = 0.3 • Flux Ratio (Cl / Ion) = 0.8 Ref: K. Ono, M. Tuda, H. Ootera, and T. Oomori, Pure and Appl. Chem. Vol 66 No 6, 1327 (1994) SHS_MJK_AVS

  6. University of Michigan Institute for Plasma Science & Engr. HYBRID PLASMA EQUIPMENT MODEL (HPEM) Te,Sb, Seb, k Fluid Kinetics Module Fluid equations (continuity, momentum, energy) Poisson’s equation Electron Monte Carlo Simulation E,Ni, ne • Fluid Kinetics Module: • Heavy particle and electron continuity, momentum, energy • Poisson’s equation • Electron Monte Carlo Simulation: • Includes secondary electron transport • Captures anomalous electron heating • Includes electron-electron collisions SHS_MJK_AVS

  7. University of Michigan Institute for Plasma Science & Engr. MONTE CARLO FEATURE PROFILE MODEL (MCFPM) • The MCFPM resolves the surface topology on a 2D Cartesian mesh. • Each cell has a material identity. Gas phase species are represented by Monte Carlo pseuodoparticles. • Pseuodoparticles are launched with energies and angles sampled from the distributions obtained from the HPEM • Cells identities changed, removed, added for reactions, etching deposition. HPEM PCMCM Energy and angular distributions for ions and neutrals • Poisson’s equation solved for charging MCFPM Etch rates and profile SHS_MJK_AVS

  8. University of Michigan Institute for Plasma Science & Engr. REACTOR GEOMETRY: 2 FREQUENCY CCP • 2D, cylindrically symmetric • Ar/CF4/O2 = 75/20/5, 40 mTorr, 200 sccm • Base conditions • Lower electrode: LF = 10 MHz, 500 W, CW • Upper electrode: HF = 40 MHz, 500 W, Pulsed SHS_MJK_AVS

  9. PULSE POWER University of Michigan Institute for Plasma Science & Engr. • Use of pulse power provides a means for controlling f(). • Pulsing enables ionization to exceed electron losses during a portion of the ON period – ionization only needs to equal electron losses averaged over the pulse period. Pmax Power(t) Duty Cycle Pmin Time = 1/PRF • Pulse power for high frequency. • Duty-cycle = 25%, PRF = 50, 100, 200, 415, 625 kHz • Average Power = 500 W SHS_MJK_AVS

  10. University of Michigan Institute for Plasma Science & Engr. VARIABLE BLOCKING CAPACITOR • Due to the different area of two electrodes, a “dc” bias is produced on the blocking capacitor connected to the substrate electrode. • The temporal behavior of “dc” bias is dependent on the magnitude of the capacitance due to RC delay time. • We investigated variable blocking capacitor of 10 nF, 1 mF, and 100 F • 100 F of blocking capacitor results in NO “dc” bias on the substrate. SHS_MJK_AVS

  11. Typical Plasma Properties SHS_MJK_AVS

  12. University of Michigan Institute for Plasma Science & Engr. MAX MIN PULSED CCP: Electron Density & Temperature • Electron Density (x 1011 cm-3) • Electron Temperature (eV) • Pulsing with a moderate PRF duty cycle produces nominal intra-cycles changes in [e] but does modulate Te. • 40 mTorr, Ar/CF4/O2=75/20/5 • PRF = 100 kHz, Duty-cycle = 25% • HF = 40 MHz, pulsed 500 W • LF = 10 MHz, 250 V ANIMATION SLIDE-GIF SHS_MJK_AVS

  13. University of Michigan Institute for Plasma Science & Engr. MAX MIN PULSED CCP: ELECTRON SOURCES • by Bulk Electrons (x 1014 cm-3 s-1) • by Secondary Electrons • The electrons have two groups: bulk low energy electrons and beam-like secondary electrons. • The bulk electron source is negative due to electron attachment and dissociative recombination. • The electron source by beam electrons compensates the electron losses and sustains the plasma. ANIMATION SLIDE-GIF • 40 mTorr, Ar/CF4/O2=75/20/5 • LF 250 V, HF 500 W SHS_MJK_AVS

  14. University of Michigan Institute for Plasma Science & Engr. PULSED CCP: E-SOURCES and f(e) • Rate coefficient of e-sources is modulated between electron source (electron impact ionization) and loss (attachment and recombination) during pulsed cycle. ANIMATION SLIDE-GIF • 40 mTorr, Ar/CF4/O2=75/20/5 • PRF = 100 kHz, Duty-cycle = 25% • LF = 10 MHz, 250 V • HF = 40 MHz, pulsed 500 W SHS_MJK_AVS

  15. Etch Properties:Variable Blocking Capacitor SHS_MJK_AVS

  16. University of Michigan Institute for Plasma Science & Engr. PULSED CCP: PLASMA POTENTIAL & dc BIAS • A small blocking capacitor allows the “dc” bias to follow the change during the pulse period. • Maximum ion energy gain = Plasma Potential – “dc” Bias • 1 mF • 10 nF • PRF = 100 kHz, Duty-cycle = 25% • LF = 10 MHz, 250 V • HF = 40 MHz, pulsed 500 W

  17. University of Michigan Institute for Plasma Science & Engr. ETCH PROFILE IN SiO2 & IEAD: 1 mF • With constant voltage, bias amplitude is constant but blocking capacitor determines “dc” bias. • Cycle Average IEAD • Etch Profile (600 sec) Energy (eV) Height (mm) Width (mm) Angle (degree) ANIMATION SLIDE-GIF SHS_MJK_AVS • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V, Blocking Cap. = 1 mF

  18. University of Michigan Institute for Plasma Science & Engr. ETCH PROFILE IN SiO2 & IEAD: 10 nF • With smaller blocking capacitor, “dc” bias begins to follow the rf power and so produces a different IEAD. • Cycle Average IEAD • Etch Profile (600 sec) Energy (eV) Height (mm) Width (mm) Angle (degree) ANIMATION SLIDE-GIF SHS_MJK_AVS • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V, Blocking Cap. = 1 nF

  19. University of Michigan Institute for Plasma Science & Engr. ETCH PROFILE IN SiO2 & IEAD: NO dc BIAS • In absence of dc bias and for constant voltage, pulse power and is effect on f() in large part determine etch properties. • Cycle Average IEAD • Etch Profile (600 sec) Energy (eV) Height (mm) Width (mm) Angle (degree) ANIMATION SLIDE-GIF SHS_MJK_AVS • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V, Blocking Cap. = 100 F

  20. University of Michigan Institute for Plasma Science & Engr. POWER NORMALIZED ER: Blocking Capacitor • Power normalized etch rate is dependent not only on the pulse repetition frequency (PRF), but also the value of the blocking capacitor on the substrate at lower PRF. • F to Poly Flux ratio C B A CW 250 100 50 kHz C B A • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V SHS_MJK_AVS

  21. University of Michigan Institute for Plasma Science & Engr. E-SOURCES and FLUX RATIO: PRF • Electron source rate coefficient is modulated with f(e) by pulse power. • Modulation is enhanced with smaller PRF. • F to Poly Flux ratio • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V • Blocking Cap. = 1 mF SHS_MJK_AVS

  22. University of Michigan Institute for Plasma Science & Engr. ETCH RATE: POWER NORMALIZED • Power normalized etch rate is large at 250 kHz with ion distribution extending to higher energies. • Cycle Average IEAD • Normalized Etch Rate Energy (eV) CW 250 100 50 kHz Angle (degree) • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V • Without DC Bias on LF electrode SHS_MJK_AVS

  23. University of Michigan Institute for Plasma Science & Engr. ETCH PROFILE: CRITICAL DIMENSION • CD is compared at the middle and bottom of feature. • CW excitation produces bowing and an undercut profile. • Pulse plasma helps to prevent the bowing and under-cutting. • Smaller PRF has a tapered profile. • EPD + Over Etch 50% A (1/A) 1 (2/A) CW 250 100 50 kHz 2 • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V • Blocking Cap. = 1 mF SHS_MJK_AVS

  24. University of Michigan Institute for Plasma Science & Engr. ETCH SELECTIVITY: Between SiO2 and Si • Silicon damage depthis compared in 2-D etch profile. • Pulsed operation helps to prevent the silicon damage. • Lower damage appears to be correlated with smaller F flux ratio at 250 kHz. • EPD + Over Etch 50% CW 250 100 50 kHz • Pulsed HF 40 MHz 500 W • LF 10 MHz 250 V • Blocking Cap. = 1 mF SHS_MJK_AVS

  25. University of Michigan Institute for Plasma Science & Engr. CONCLUDING REMARKS • Extension of tail of f(e) beyond that obtained with CW excitation produces a different mix of fluxes to substrate. • Etch rate can be controlled by pulsed operation with different pulse repetition frequencies. • Blocking capacitor is another variable to control ion energy distributions and etch rates. Smaller capacitance allows “dc” bias to follow the plasma potential in pulse period more rapidly. • Etch rate is enhanced by pulsed power operation in CCP. • Etch profile is improved with pulsed operation preventing undercut. • Etch selectivity of SiO2 to Si is also improved with PRF of 250 kHz with a smaller fluorine flux ratio. SHS_MJK_AVS

More Related