1 / 15

Koryo Okumura / Marc Sauvage CEA/DSM/IRFU/SAp

PACS Commissioning phase, Pointing Verification and Performance Verification Phase Planning Review (PVPhot). Koryo Okumura / Marc Sauvage CEA/DSM/IRFU/SAp. Cooler Recycling 1 (CPPhotCooler and PVPhotCooler). Same as the commissioning phase.

pegeen
Download Presentation

Koryo Okumura / Marc Sauvage CEA/DSM/IRFU/SAp

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PACS Commissioning phase,Pointing Verification andPerformance Verification PhasePlanning Review(PVPhot) Koryo Okumura / Marc Sauvage CEA/DSM/IRFU/SAp

  2. Cooler Recycling 1 (CPPhotCooler and PVPhotCooler) • Same as the commissioning phase - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  3. Photometer orbit prologue (CPPhotSetup and PVPhotSetup) • Same as the commissioning phase except for the bias table which should may be updated after the commissioning phase • Bolometer bias setting : • default table is BOLObias_ILT_standard_low • Internal calibration source (CSs) is switched on and set : • default values of CS1=48 and CS2=58 Ohm • Wait for the stabilisation of the CSs • default 2100 sconds = 35 minutes • Total duration : 2272s = 38 minutes - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  4. PacsEng_setCSsTemp (PVPhotSetup) • For some execution of the prologue the CSs are set to very low levels • At some stage CSs should be set using this CUS script • The stabilization time is set to 2100 by default from 4 to 48, 58 Ohm • The stabilization time from 48, 58 to 80, 92 Ohm is shorter and set to 1800 seconds = 30 minutes - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  5. Photometer orbit epilogue (CPPhotSetup and PVPhotSetup) • Same as the commissioning phase - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  6. OBCP_chopped_photometry (PVPhotBol) • As in the commissioning phase we can foresee some small calibration blocks • Currently this is not yet in PVPhotBol - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  7. VRL and VH_BLIND exploration (CPPhotBol and PVPhotBol) • Same as the commissioning phase, but shorter because of a restricted parameter space • VRL : [2.4, 2.1, 1.8] V • VH_BLIND : [0.05, 0.1, 0.2, 0.4, 0.6, 0.7, 0.8] V • Duration : 2827 seconds = 48 minutes - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  8. Low gain measurements 1 (PVPhotBol) • PCD-req.1.1.1 • in low gain in direct mode • Filter 100 um • chopper on CS1 : -21350, 48 Ohm, 1.20pW on blue, 5.90pW on red • 12 blue biases [1.25, 1.6, 1.8, 2.0, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0, 3.3] V • 12 red biases [1.0, 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.4, 2.6] V • chopper on CS2 : 21200, 58 Ohm, 1.55pW on blue, 6.90pW on red • 12 blue biases [1.25, 1.6, 1.8, 2.0, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0, 3.3] V • 12 red biases [1.0, 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.4, 2.6] V • chopper on FOV : 664, 1.42pW on blue, 2.30pW on red • 12 blue biases [1.25, 1.6, 1.8, 2.0, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0, 3.3] V • 12 red biases [1.0, 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.4, 2.6] V • Filter 70 um • chopper on CS1 : -21350, 48 Ohm, 0.90pW on blue, 5.90pW on red • 12 blue biases [1.25, 1.6, 1.8, 2.0, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0, 3.3] V • 12 red biases [1.0, 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.4, 2.6] V • chopper on CS2 : 21200, 58 Ohm, 1.25pW on blue, 6.90pW on red • 12 blue biases [1.25, 1.6, 1.8, 2.0, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0, 3.3] V • 12 red biases [1.0, 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.4, 2.6] V • chopper on FOV : 664, 2.53pW on blue, 2.30pW on red • 12 blue biases [1.25, 1.6, 1.8, 2.0, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0, 3.3] V • 12 red biases [1.0, 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.4, 2.6] V • Duration : 27773 seconds = 7h43m - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  9. Low gain measurements 2 (PVPhotBol) • parameters: • int measure_time = 300; // measure time in seconds • string startBiasTable = "BOLObias_ILT_lowCSs"; // Bias table containing the initial values • string endBiasTable = "BOLObias_ILT_lowCSs"; // Bias table containing the final values • double ra = 267.292; // RA : 17h49m10.0s • double dec = 69.807; // DEC : 69d48m26.0s • int nLoops1 = 30; // number of CSs cycles [2s] during slew • int nLoops2 = 30; // number of CSs cycles during initial hold • int nLoops5 = 30; // number of CSs cycles during final hold - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  10. High gain measurements 1 (PVPhotBol) • PCD-req.1.1.1bis • 2 possibilities • Raster on a SSO • Raster on a star • Source : • Ceres : not visible • MNL-Cyg : variable star • Pallas : current implementation • Duration : • Direct : 20 x 5327 s = 29h36m • DDCS : 3 x 5327 s = 4h27m - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  11. High gain measurements 2 (PVPhotBol) • high gain in direct or DDCS mode • ginit / binit : • set filter 100um, set appropriate biases for the given flux, set chopper 664 • select one bias : • direct mode • blue [1.0, 1.3, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0, 3.1, 3.3, 3.5] V • red [1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 3.0] V • DDCS mode • blue [2.0, 2.6, 3.0] V • red [1.4, 2.0, 2.4] V • final : • set the default biases, set direct mode, set low gain - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  12. High gain measurements 3 (PVPhotBol) • parameters: • string select = "ginit" in ["ginit","g1_0","g1_3","g1_6","g1_7","g1_8","g1_9","g2_0","g2_1","g2_2","g2_3","g2_4","g2_5","g2_6","g2_7","g2_8","g2_9","g3_0","g3_1","g3_3","g3_5","binit","b1_0","b1_3","b1_6","b1_7","b1_8","b1_9","b2_0","b2_1","b2_2","b2_3","b2_4","b2_5","b2_6","b2_7","b2_8","b2_9","b3_0","b3_1","b3_3","b3_5","final"]; // Sequence number to define a configuration • int naifid = 2000001; // SSO tracking object number • double ra = 0.0; // RA • double dec = 0.0; // Dec • int measure_time = 120; // measure time in seconds per pointing • string startBiasTable = "BOLObias_standard_high"; // Bias table containing the initial values • string endBiasTable = "BOLObias_standard_high"; // Bias table containing the final values • string calBiasTable = "BOLObias_standard_low"; // Bias table used during calibration blocks • int nLoops1 = 30; // number of CSs cycles during slew • int nLoops5 = 30; // number of CSs cycles during final hold • int readouts_plateau = 16; // number of readouts per chopper plateau • string calGain = "LOW" in ["NO_CHANGE","LOW","HIGH"]; // Gain of calibration blocks, the same as OBS if NO_CHANGE • string calMode = "DIRECT" in ["NO_CHANGE","DIRECT","DDCS"]; // Mode of calibration blocks, the same as OBS if NO_CHANGE • bool chop = true; // Chopping within FOV during the raster - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  13. Low frequency noise measurements (PVPhotBol) • PCD-req.1.1.11 • 2 filters • Direct and DDCS modes • 3 biases • Duration : 12 x 11668s = 38h54m - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  14. Bandpass measuremnts 1 (PVPhotBol) • PCD-req.1.1.16 • Chop between FOV and CS1 • filter 100um • burst mode • 8 chopper frequencies • [40, 2, 3, 4, 6, 8, 10, 16] readouts / plateau • 3 biases • blue biases [1.8, 2.6, 3.2] V • red biases [1.4, 2.0, 2.5] V • buffer transmission mode • Duration : 2 x 11226s = 6h15m - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

  15. Bandpass measuremnts 2 (PVPhotBol) • parameters: • int sideField = 7134; // Chopper angle for the FOV next to BB2 • int chop_pos_CS2 = 21196; // Chopper angle for BB2 • string biasTable = "BOLObias_standard_low"; // Bias table • string gain = "LOW" in ["LOW","HIGH"]; // gain used during the measurements • double ra = 267.292; // RA : 17h49m10.0s • double dec = 69.807; // DEC : 69d48m26.0s • string calBiasTable = "BOLObias_standard_low"; // Bias table used during calibration blocks • string calGain = "LOW" in ["NO_CHANGE","LOW","HIGH"]; // Gain of calibration blocks, the same as OBS if NO_CHANGE • string calMode = "DIRECT" in ["NO_CHANGE","DIRECT","DDCS"]; // Mode of calibration blocks, the same as OBS if NO_CHANGE • int nLoops1 = 30; // number of CSs cycles during slew • int nLoops2 = 30; // number of CSs cycles during initial hold • int nLoops5 = 30; // number of CSs cycles during final hold • int readouts_plateau = 16; // number of readouts per plateau - Koryo OKUMURA - PACS CoP, Pointing Verification and PVP Planning Review

More Related