Recyclable replacement service pack contents
This presentation is the property of its rightful owner.
Sponsored Links
1 / 5

Recyclable Replacement Service Pack Contents PowerPoint PPT Presentation


  • 72 Views
  • Uploaded on
  • Presentation posted in: General

Recyclable Replacement Service Pack Contents. Technolube Electromechanical Refillable Lubricators * * * * * * * * *. Replacing the used grease pouch and battery pack. Main Unit. Grease pouch prefilled. Batteries. Waterproof cover.

Download Presentation

Recyclable Replacement Service Pack Contents

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Recyclable replacement service pack contents

Recyclable Replacement Service Pack Contents

Technolube Electromechanical Refillable Lubricators* * * * * * * * *

Replacing the used grease pouch and battery pack.

Main Unit

Grease pouch

prefilled

Batteries

Waterproof cover

Plus replacement grease type label.

Next..


Technolube electromechanical refillable lubricators

Technolube Electromechanical Refillable Lubricators* * * * * * * * *

.

Replacing the used grease pouch and battery pack.

Order service packs from your

distributor, with the grease pouches

pre-filled with your choice of lubricant.

The pack also includes a replacement

battery, waterproof cover and new

grease label. (The battery should be

replaced for each new grease pouch

as the old battery does not have

enough power remaining for a

second dispense period.)

Procedure:

Unscrew the housing and then

the empty grease pouch. Remove

old battery and replace with the new

one, pressing down firmly. The used

pouch and battery can be recycled.

Next..


Technolube electromechanical refillable lubricators1

Technolube Electromechanical Refillable Lubricators* * * * * * * * *

One very important step – ALWAYS ensure that there is no air bubble in the unit.

When you remove the grease pouch from the unit, the pressure release often causes air to be drawn into the greaseway forming an air bubble. Unless removed this will stop the grease In the newly installed pouch from travelling into the bearing. There is a check valve beneath the hole in the centre of the unit base to deal with this.

After removing the pouch, gently depress the check valve as illustrated a few times with a thin Allen wrench or screwdriver, or similar tool. This will remove any air which has been suctioned in.

Tool inserted

Check valve location

Wipe away any grease and reassemble the unit with the new pouch. Press and hold the TEST button to active a test cycle before resetting and replacing the unit on its location.

RESETTING INSTRUCTIONS NEXT..


Technolube electromechanical refillable lubricators2

Technolube Electromechanical Refillable Lubricators* * * * * * * * *

Press POWER for two seconds If you have the 125cc or 250cc unit, press the “125/250/TEST” button

until the display shows the correct capacity for your lubricator. Reset the dispensing rate by pressing

the MODE LOCK until you reach the required month number. See setup chart below.

After you have confirmed active dispensing, press RESET to stop, clean off the excess grease from the outlet, and check the bearing for any solidified grease. Fill the bearing to entrypoint with the same grease if necessary. Re-install the lubricator.

If the lock icon appears on the display

deactivate by pressing MODE LOCK until

it disappears, and resume setup. The

MODE LOCK will protect your setting from

accidental change after a few seconds.

Fix the grease label in place and replace the

new clear plastic cover and you are done!

months

Reset

button

Next..


Technolube electromechanical refillable lubricators3

Technolube Electromechanical Refillable Lubricators* * * * * * * * *

Your lubricator is now programmed and running. The setting is locked

against accidental change, the display is giving you confirmation of your

settings, and the time left is being displayed in days.

These are the tests and procedures we use when assembling your initial

refillable Mechanical Lubricator purchased “ready to set up” on arrival.

The display unit may later flash various codes; charts with the message

translations are on our flyers for the Mechanical series, and on our website.

If you need more information, please get in touch with us by phone or email.

Technolube Inc.

Richmond BC V7A 3K5 Canada

Ph. 604.204.0144 – tollfree 1.888.777.0144

Fax 604.275.3599 – tollfree 1.877.270.3599

technolube@telus.net- www.technolube.ca

“We strive to exceed your expectations”


  • Login