1 / 21

Interface Fracture Toughness of EBPVD TBCs by Cross-Sectional Indentation

Interface Fracture Toughness of EBPVD TBCs by Cross-Sectional Indentation. Xin Wang and Alan Atkinson Department of Materials, Imperial College. Introduction. Interface Fracture. YSZ. TGO. Bond Coat. Substrate. Driving force: the stored energy in ceramic layers.

paulos
Download Presentation

Interface Fracture Toughness of EBPVD TBCs by Cross-Sectional Indentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Interface Fracture Toughness of EBPVD TBCsby Cross-Sectional Indentation Xin Wang and Alan Atkinson Department of Materials, Imperial College

  2. Introduction Interface Fracture YSZ TGO Bond Coat Substrate Driving force: the stored energy in ceramic layers

  3. TBC lifetime depends on interplay between the driving force and the resistance to crack propagation Work of interface separation Energy Stored energy Lifetime Thermal exposure Time

  4. Stored energy in TGO . Interface toughness?

  5. Interface Fracture Test Methods • Stable crack propagation, • Controllable crack propagation, ie., along the interface of interest; • Easiness of cracking observation and measurement • Two major challenges for testing EBPVD TBCs: • Crack path is difficult to control; cracks tend to divert into top coat; • Elastic properties of the top coat is still very poorly characterised

  6. Test Methods for TBCs Top surface Indentation J. Beuth, Eng. Fract. Mechanics, 68(2001), 843 ‘Barb’ shear test Y. Kagawa, Acta. Mater., 56(2008), 43

  7. Cross-sectional Indentation (CSI) Indentation imprint Substrate Interface crack YSZ/TGO SEM Cross sectional image Schematic of CSI

  8. Characterisation of interface cracks Luminescence mapping on top surface Peak shift map (Semicircular delamination) Signal intensity map (TGO/bond coat)

  9. The influence of thermal cycling on interface fracture The delaminated area vs. distance to interface for two different sets of specimens

  10. Crack length affected by stiffening of the topcoat Araldite glue YSZ Substrate 50 cycle

  11. Young’s modulus measurement Free standing specimen was prepared by acid dissolution by HCl acid; YSZ TGO Substrate

  12. Two different test arrangements Loading Loading Column- opening Column- closing

  13. Miniature 3 point bending test 0.03N 0N 0.01N 0.02N 0.04N Column-opening 0N 0.01N 0.03N 0.02N 0.04N Column-closing

  14. Beam profile fitting P -- load, L -- support span I -- second moment of the cross sectional area RO -- radius of the curvature without loading

  15. Young’s modulus as a function of the strain

  16. h R Top surface strain under CSI condition Load: 20 Kg DCI:225μm

  17. A Clamped Circular Plate Model Δμ a EC ----Young’s modulus of the coating HC -----the thickness of the coating a ------the crack length ∆u ------the vertical displacement

  18. Influence of the coating thickness on CSI test Assuming the energy release rate=20 J/ m2 Assuming Ec=40 GPa

  19. 50μm

  20. Conclusions 1)The stiffness of the top coat in TBCs strongly depends on the strain of the coating: the Young’s modulus of the top coat quickly decreases with the strain in YSZ. 2) The interface toughness may be determined more reliably when top layer YSZ with columnar structure is removed. The Critical energy release rate of TGO/bond interface is about 20 J/m2 for TBCs with Pt-diffusion bond coat thermally cycled for 50 cycles.

  21. Thank You for Your Attention!

More Related