1 / 38

Statistical Process Control (SPC)

Statistical Process Control (SPC). Chapter 6. MGMT 326. Capacity, Facilities, & Work Design. Products & Processes. Quality Assurance. Planning & Control. Foundations of Operations. Project Manage- ment. Managing Quality. Introduction. Strategy. Statistical Process Control.

patch
Download Presentation

Statistical Process Control (SPC)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Statistical Process Control (SPC) Chapter 6

  2. MGMT 326 Capacity, Facilities, & Work Design Products & Processes Quality Assurance Planning & Control Foundations of Operations Project Manage- ment Managing Quality Introduction Strategy Statistical Process Control Product Design Process Design

  3. Capable Processes  = target  = target Statistical Process Control (SPC) SPC for Variables Basic SPC Concepts Types of Measures Variation Attributes Mean charts Range charts Objectives Variables  and  known First steps ,  unknown

  4. Outputs Goods & Services Transformation Process Variation in a Transformation Process Variation Variation • Inputs • Facilities • Equipment • Materials • Energy Variation • Variation in inputs create variation in outputs • Variations in the transformation process • create variation in outputs

  5. Variation • All processes have variation. • Common cause variation is random variation that is always present in a process. • Assignable cause variation results from changes in the inputs or the process. The cause can and should be identified. • Assignable cause variation shows that the process or the inputs have changed, at least temporarily.

  6. Objectives of Statistical Process Control (SPC) • Find out how much common cause variation the process has • Find out if there is assignable cause variation. • A process is in control if it has no assignable cause variation • Being in control means that the process is stable and behaving as it usually does. • It does not mean that we have conformance quality and meet customer requirements.

  7. First Steps in Statistical Process Control (SPC) • Measure characteristics of goods or services that are important to customers • Make a control chart for each characteristic • The chart is used to determine whether the process is in control

  8. Variable Measures • Continuous random variables • Measure does not have to be a whole number. • Examples: time, weight, miles per gallon, length, diameter

  9. Attribute Measures • Good/bad evaluations • Good or defective • Correct or incorrect • Number of defects per unit – always a whole number • Number of scratches on a table • Opinion surveys of quality • Customer satisfaction surveys • Teacher evaluations

  10. SPC for VariablesThe Normal Distribution  = the population mean • = the standard deviation for the population 99.74% of the area under the normal curve is between  - 3 and  + 3

  11. SPC for Variables The Central Limit Theorem • Samples are taken from a distribution with mean  and standard deviation . k = the number of samples n = the number of units in each sample • The sample means are normally distributed with mean  and standard deviation when k is large.

  12. Control Limits for the Sample Mean when  and  are known • x is a variable, and samples of size n are taken from the population containing x. Given:  = 10,  = 1, n = 4 Then A 99.7% confidence interval for is

  13. Control Limits for the Sample Mean when  and  are known (2) The lower control limit for is

  14. Control Limits for the Sample Mean when  and  are known (3) The upper control limit for is

  15. Control Limits for the Sample Mean when  and  are unknown • If the process is new or has been changed recently, we do not know  and  • Excel table, page 180 • Given: 25 samples, 4 units in each sample •  and  are not given • k = 25, n = 4

  16. Control Limits for the Sample Mean when  and  are unknown (2) • Compute the mean for each sample. For example, • Compute

  17. Control Limits for the Sample Mean when  and  are unknown (3) • For the ith sample, the sample range is Ri =(largest value in sample i ) - (smallest value in sample i ) • Compute Ri for every sample. For example, R1 = 16.02 – 15.83 = 0.19

  18. Control Limits for the Sample Mean when  and  are unknown (4) • Compute , the average range • We will approximate by , where A2is a number that depends on the sample size n. We get A2from Table 6.1, page 182

  19. Factor for x-Chart Factors for R-Chart Sample Size (n) A2 D3 D4 2 1.88 0.00 3.27 3 1.02 0.00 2.57 4 0.73 0.00 2.28 5 0.58 0.00 2.11 6 0.48 0.00 2.00 7 0.42 0.08 1.92 8 0.37 0.14 1.86 9 0.34 0.18 1.82 10 0.31 0.22 1.78 11 0.29 0.26 1.74 12 0.27 0.28 1.72 13 0.25 0.31 1.69 14 0.24 0.33 1.67 15 0.22 0.35 1.65 Control Limits for the Sample Mean when  and  are unknown (5) • n = the number of units in each sample = 4. From Table 6.1, A2= 0.73. The same A2is used for every problem with n = 4.

  20. Control Limits for the Sample Mean when  and  are unknown (6) • The formula for the lower control limit is • The formula for the upper control limit is

  21. Control Chart for The variation between LCL = 15.74 and UCL = 16.16 is the common cause variation.

  22. Factor for x-Chart Factors for R-Chart Sample Size (n) A2 D3 D4 2 1.88 0.00 3.27 3 1.02 0.00 2.57 4 0.73 0.00 2.28 5 0.58 0.00 2.11 6 0.48 0.00 2.00 7 0.42 0.08 1.92 8 0.37 0.14 1.86 9 0.34 0.18 1.82 10 0.31 0.22 1.78 11 0.29 0.26 1.74 12 0.27 0.28 1.72 13 0.25 0.31 1.69 14 0.24 0.33 1.67 15 0.22 0.35 1.65 Control Limits for R • From the table, get D3 and D4 for n = 4. D3 = 0 D4= 2.28

  23. Control Limits for R (2) • The formula for the lower control limit is • The formula for the upper control limit is

  24. fig_ex06_03 fig_ex06_03

  25. Capable Processes  = target  = target Statistical Process Control (SPC) SPC for Variables Basic SPC Concepts Types of Measures Variation Attributes Mean charts Range charts Objectives Variables  and  known First steps ,  unknown

  26. Capable Transformation Process • Inputs • Facilities • Equipment • Materials • Energy Outputs Goods & Services that meet specifications CapableTransformation Process a specification that meets customer requirements + acapable process (meets specifications) = Satisfied customers and repeat business

  27. Review of Specification Limits • The target for a process is the ideal value • Example: if the amount of beverage in a bottle should be 16 ounces, the target is 16 ounces • Specification limits are the acceptable range of values for a variable • Example: the amount of beverage in a bottle must be at least 15.8 ounces and no more than 16.2 ounces. • The allowable range is 15.8 – 16.2 ounces. • Lower specification limit = 15.8 ounces or LSL = 15.8 ounces • Upper specification limit = 16.2 ounces or USL = 16.2 ounces

  28. Control Limits vs. Specification Limits • Control limits show the actual range of variation within a process • What the process is doing • Specification limits show the acceptable common cause variation that will meet customer requirements. • Specification limits show what the process should do to meet customer requirements

  29. Process is Capable: Control Limits arewithin or on Specification Limits Upper specification limit UCL X LCL Lower specification limit

  30. Process is Not Capable: One or BothControl Limits are Outside Specification Limits UCL Upper specification limit X LCL Lower specification limit

  31. Capability and Conformance Quality • A process is capable if • It is in control and • It consistently produces outputs that meet specifications. • This means that both control limits for the mean must be within the specification limits • A capable process produces outputs that have conformance quality (outputs that meet specifications).

  32. Process Capability Ratio • Use to determine whether the process is capable when  = target. • If , the process is capable, • If , the process is not capable.

  33. Example • Given: Boffo Beverages produces 16-ounce bottles of soft drinks. The mean ounces of beverage in Boffo's bottle is 16. The allowable range is 15.8 – 16.2. The standard deviation is 0.06. Find and determine whether the process is capable.

  34. Example (2) • Given:  = 16,  = 0.06, target = 16 LSL = 15.8, USL = 16.2 The process is capable.

  35. Process Capability Index Cpk • If Cpk > 1, the process is capable. • If Cpk < 1, the process is not capable. • We must use Cpk when  does not equal the target.

  36. CpkExample • Given: Boffo Beverages produces 16-ounce bottles of soft drinks. The mean ounces of beverage in Boffo's bottle is 15.9. The allowable range is 15.8 – 16.2. The standard deviation is 0.06. Find and determine whether the process is capable.

  37. CpkExample (2) • Given:  = 15.9,  = 0.06, target = 16 LSL = 15.8, USL = 16.2 Cpk < 1. Process is not capable.

  38. Capable Processes  = target  = target Statistical Process Control (SPC) SPC for Variables Basic SPC Concepts Types of Measures Variation Attributes Mean charts Range charts Objectives Variables  and  known First steps ,  unknown

More Related