1 / 17

A/C SYSTEM COMPONENTS

A/C SYSTEM COMPONENTS. Visit for more Learning Resources. The Refrigeration Cycle. Refrigeration – To remove heat by mechanical means Refrigerant – Chemical compound used in a refrigeration system to carry heat

parkerm
Download Presentation

A/C SYSTEM COMPONENTS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A/C SYSTEM COMPONENTS Visit for more Learning Resources

  2. The Refrigeration Cycle • Refrigeration – To remove heat by mechanical means • Refrigerant – Chemical compound used in a refrigeration system to carry heat • Refrigeration Cycle – Repeatedly changing refrigerant from a liquid to a vapor & vapor to liquid to remove heat

  3. Basic Air Conditioning System

  4. Compressor • Refrigerant pump • Increases Pressure & Temperature • Separates High & Low sides of system • Oil stored in Crankcase (sump)

  5. Compressor Malfunctions • Malfunctions evident in following ways: • Noise • Seizure • Leaks • High inlet & low discharge pressures

  6. Discharge Hose • CONTAINS HIGH PRESSURE. • SYNTHETIC RUBBER WITH NYLON BARRIER LINING. • 13/32 ID. • PREFORMED METAL ENDS WITH FITTINGS.

  7. Condenser • Heat exchanger. • Liquefies heat laden vapor • Hot vapor enters at top of condenser • Hot liquid leaves at bottom

  8. Conventional Tube and Fin • Parallel Two Path. • Mechanically expanded tube to fin joints. • Circular Tubes.

  9. Serpentine Tube and Center Condenser • Brazed tube to fin joints. • Flat Tubes. • Parallel two path flow.

  10. Multi-Louver Fin Design • Manifolded Multi-path refrigerant flow.

  11. Evaporator • Dehumidifies the airstream. • Under ideal conditions, refrigerant boils to complete saturation 3/4 of the way through Evaporator. • Flooded evaporator means is full of liquid refrigerant with no room for expansion. • Starved evaporator means all refrigerant is boiled in the first quarter of the evaporator.

  12. Receiver -Drier • Stores reserve liquid refrigerant • Ensures vapor-free liquid to the thermostatic expansion valve (TXV). • Located on the high side of the system. • Contains a desiccant that absorbs moisture.

  13. Receiver -Drier

  14. Thermostatic Expansion Valve • Located on inlet side of evaporator. • Used to control evaporator temp. • Variable orifice can vary on pressure, temperature or both. • Can malfunction in open or closed position.

  15. TXV Operation

  16. Orifice Tube • Calibrated Restrictor • Different color = different Orifice size. • Mesh Filter Screen. • Meters refrigerant into evaporator as low pressure liquid.

  17. Accumulator • Located between evaporator and compressor (low side) • Primary function is to separate the vapor from the liquid and oil. • Location for desiccant. For more detail contact us

More Related