1 / 113

Wastewater Treatment

Wastewater Treatment. On completion of this module you should be:. Aware of the public health aspects and goals of wastewater treatment Able to define the design flows to a wastewater treatment plant

parker
Download Presentation

Wastewater Treatment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wastewater Treatment On completion of this module you should be: • Aware of the public health aspects and goals of wastewater treatment • Able to define the design flows to a wastewater treatment plant • Able to describe and discuss the processes involved in primary, secondary and tertiary treatment • Able to compare the differences between the fixed-film and suspended growth systems in biological treatment • Able to discuss the methods available for nutrient removal Module 8

  2. Wastewater Treatment Public health aspects of wastewater treatment • 3.4 million people, mostly children, die annually from water-related diseases • 2.4 million people lack access to basic sanitation include the poorest in the world • 1.1 billion people lack access to even improved water sources • Access to safe water supply and sanitation is fundamental for better health, poverty alleviation and development (WHO data) Module 8

  3. Typical Characteristics of Wastewater Module 8

  4. Wastewater Treatment Goals • Minimum capital cost • Reliable and economic operation • Protect public health from contamination of water supplies • Removal of floating, suspended and soluble matter Module 8

  5. Wastewater Treatment Goals (cont) • Reduce BOD, COD, pathogenic organisms and nutrient • Efficient collection system for aerobic conditions • Maintain aesthetics of natural water bodies, ecology of water systems Module 8

  6. Treatment Selection • Wastewater treatment comprises primary, secondary and tertiary treatments • The selection of appropriate treatment processes is dependent upon the nature and strength of pollutants, quantity of flow, and discharge licence conditions Module 8

  7. Design Flows Module 8

  8. Primary Treatment • The first stage of wastewater treatment comprises largely physical processes. • A well-designed primary treatment should remove about 40 - 75% of TSS and about 25 - 40% BOD5 • A possible pre-treatment is the injection of air, O2, H2O2 and pre-chlorination if the influent is anaerobic • Processes include screening, grit removal and primary settling Module 8

  9. Screens The removal of large objects that may damage pumps or block channels • Fixed or mechanical • Velocity in channels about 0.3 - 0.4 m/s • Velocity through openings about 0.6 - 1 m/s • All screenings to be removed/buried • Location of strong odour from decomposition Module 8

  10. Mechanical bar screen Module 8

  11. Rotating drum screen Module 8

  12. Comminutors • These are mechanical cutting screens that reduce the size of large objects • Shredded matter are returned to the flow stream • A by-pass may be included Module 8

  13. Comminutor Module 8

  14. Grit Chambers • Purpose is to remove inorganic grit/sand 0.2 - 1 mm size through differential settling • Aim is to prevent damage to pumps, blockage of channels and cementing of sludge in settling tanks • Two types of grit chambers, namely constant velocity and aerated/spiral flow tanks Module 8

  15. Constant Velocity Grit Chamber • Class I settling - horizontal flow • Uniform velocity at 0.25 - 0.35 m/s • Ideal parabolic shape or approximation • Width:depth ratio 1:1 • Length  18 x max. depth Module 8

  16. Constant Velocity Grit Chamber Module 8

  17. Aerated or Spiral Flow Grit Chamber • Flexibility of control; more efficient grit removal and can assist pre-aeration • Suitable for larger population > 10 000 ep • HRT of about 3 min at PWWF Module 8

  18. Aerated or Spiral Flow Grit Chamber Module 8

  19. Vortex Flow Grit Chamber Module 8

  20. Primary Sedimentation • Largely class II settling of flocculent matter and natural coalescence or flocculation occurs • A test column is used to establish settling characteristics and correction factor of 0.65 - 0.85 is applied to overflow rate and 1.25 - 1.5 to detention time values • Per cent removal = hn(Rn + Rn+1)/(2h) • The settled solids are pumped to an anaerobic digestion tank. The effluent (settled sewage) from primary treatment flows to the next stage i.e. secondary treatment Module 8

  21. Primary Sedimentation Per cent removed = dh1(R1 + R2)/(2h5) + dh2(R2 + R3)/(2 h5 ) + ... Module 8

  22. Some Features of Primary Settling • Design to accept 2 to 3 x ADWF • Removal of 40 - 75% suspended solids • Some incidental BOD5 reduction 25 - 40% • Hydraulic loading Q/A  30 m3/m2.d • HRT 1.5 to 3 h; depth 2.5 to 5 m • Even inlet distribution > 3 m/s • Sludge scrapers should not cause re-suspension Module 8

  23. Primary settling % removed vs time Module 8

  24. Types of Primary Settling tanks Rectangular horizontal-flow • Tanks use less space • Forward velocity 10 - 15 mm/s • Weir loading rate < 300 m3/m.d • Length:width ratio 3:1 Module 8

  25. Rectangular horizontal-flow Module 8

  26. Types of Primary Settling tanks Up-flow tank • Square with 60o sludge hopper • No moving parts as sludge is removed hydrostatically • Some possible particle carry over Module 8

  27. Up-flow settling tank Module 8

  28. Types of Primary Settling tanks • Radial-horizontal flow • Uses radial scrapers to remove sludge Circular radial flow tank Module 8

  29. Circular Radial Flow Tank Module 8

  30. Circular Radial Flow Tank Module 8

  31. Circular Radial Flow Tank Module 8

  32. Pulteney Bridge and Weir, City of Bath Module 8

  33. Secondary Treatment • Central process is biological in which dissolved organics are utilised by microorganisms • Hence, secondary treatment is often known as biological treatment • The concomitant growth of biomass (cells) and substrate removal must be followed by separation Module 8

  34. Classification of Microorganisms Module 8

  35. Typical microorganisms in activated sludge Module 8

  36. Biological processes • Aerobic condition – presence of free molecular oxygen • Anaerobic condition – devoid of free molecular oxygen • Anoxic – absence of free molecular oxygen but presence of nitrate Module 8

  37. Types of Metabolism Respiratory metabolism • aerobic microorganisms generate energy by enzyme-mediated electron transport from an electron donor to an external electron acceptor eg O2 • anoxic process uses NO3- and SO42- as the electron acceptors Module 8

  38. Types of Metabolism Fermentative metabolism • anaerobic processes that do not involve an external electron acceptor • process is less energy efficient and is characterised by low growth rates and low cell yield • facultative anaerobes can shift from fermentative to aerobic respiratory metabolism depending on the absence or presence of O2 Module 8

  39. Some Concepts of Biological Treatment • Biological growth curve • Food:microorganism ratio ie F/M • Fixed-film (attached) system and suspended growth system Module 8

  40. Biological growth curve • Lag phase • Log-growth or exponential phase • Stationary phase • Log-death or endogenous phase Module 8

  41. Biomass growth and substrate removal curves Module 8

  42. F/M ratio • Food is the substrate i.e. (Q x S) • Microorganisms i.e. (reactor volume x biomass conc.) • F/M is expressed as t-1 • F/M is used as a preliminary design criterion Module 8

  43. Fixed-Film Systems • Land treatment, trickling and rotating biological filters are predominantly aerobic biological processes • Land treatment i.e. broadcasting of sewage is one of the earliest forms of wastewater treatment Module 8

  44. Trickling Filter • Development of a biofilm on an inert surface where macro and microorganisms break down organic matter • Natural sloughing of the biofilm owing to aerobic growth, decay and shear stress at the interface • Filter medium voids promote air circulation and aerobic condition Module 8

  45. Trickling Filter Module 8

  46. Trickling filters at Wetalla Module 8

  47. Interaction of biofilm Module 8

  48. Trickling Filter (cont) • Design for PWWF • Simplicity in construction but little control • Ease of operation but high initial capital cost • Balance of hydraulic and organic loading necessary to prevent clogging of voids Module 8

  49. Trickling Filter (cont) • BOD removal efficiency E = 1/[1 + 0.44(W/VF)] • Speed of distributor is critical • Recirculation ratio 0.5 - 3 • Humus sludge production 0.3 - 0.5 g/g BOD5 removed Module 8

  50. Rotating Biological Contact Unit • A fixed-film aerobic process comprising of large number of discs rotating half submerged in a tank • Wastewater flows through the tank • Development of biofilm on the disc that interacts with the wastewater • The rotating biological contact units are compact with low energy consumption Module 8

More Related