1 / 29

Setting Up and Running the WRF Standard Initialization

Setting Up and Running the WRF Standard Initialization. John Smart and Brent Shaw NOAA / Forecast Systems Laboratory June 27, 2002. Overview. Required Files System Requirements Installing the Software Configuring Domains Configuring Interpolation Running Initializing the WRF Model

paco
Download Presentation

Setting Up and Running the WRF Standard Initialization

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Setting Up and Running the WRF Standard Initialization John Smart and Brent Shaw NOAA / Forecast Systems Laboratory June 27, 2002

  2. Overview Required Files System Requirements Installing the Software Configuring Domains Configuring Interpolation Running Initializing the WRF Model Summary

  3. Required Files WRFSI.TAR.gz Static Geographical Data (large ones in quartersphere files) Geog_Data: Topo_30s: 1) topo_30s_SW.tar.gz, 2) _SE.tar.gz, 3) _NW.tar.gz, 4) _NE.tar.gz. Landuse_30s: landuse_30s_NW.tar.gz, 2) _SE.tar.gz, 3) _NW.tar.gz, 4) _NE.tar.gz. Green fraction: greenfrac/greenfrac.tar.gz Soiltemp: soiltemp_1deg/TGLOBAL.tar.gz Soiltype (top layer): soiltype_bot_30s (NW, NE, SW, SE) Soiltype (bottom layer): soiltype_bot_30s (NW, NE, SW, SE) Albedo: albedo_ncep: albedo.tar.gz Available for download http://www.wrf-model.org (Officially released versions) ftp://ftp.fsl.noaa.gov/pub/frd-laps (Latest version, not necessarily officially released) … currently wrfsi_20020328.tar.gz

  4. System Requirements Unix or Linux OS Routinely built on IBM AIX, Intel-Linux, Alpha-Linux at FSL NCAR has built on Alpha-True64 and SGI-IRIX Ported to solaris (currently testing) FORTRAN 90 Compiler C Compiler (gcc is preferred) netCDF Libaries Perl make Utility

  5. System Requirements Disk Requirements Recommended Minimum Total Space: 10 GB Approx. 10 MB for source code and executables Approx. 6 GB for global static fields 1-10 GB for each $MOAD_DATAROOT Depends on domain size, run length, etc. NCAR 30km national domain requires approx. 1 GB to contain necessary files for a 48-hour forecast period with 3-hourly boundary conditions 2-4 GB for "typical" $EXT_DATAROOT 48 hours of AVN 1 deg and ETA 40 km grids with hourly output

  6. Installing the Software Installation Overview Set up directories and environment variables Check compiler options for your system Run the installation script Check for successful installation

  7. Installing the Software Set up directories and environment variables Source root Typically set to top directory of extracted WRFSI.TAR file Set the $SRCROOT environment variable Installation root Where executables will be installed Can be same as $SRCROOT if desired Set $INSTALLROOT environment variable Domain data root Top level directory where domain specific data will be kept Set $MOAD_DATAROOT environment variable netCDF Path (NETCDF environment variable) Determine fully qualified Perl executable (e.g., /usr/bin/perl)

  8. Installing the Software Check Compiler Settings Check $SRCROOT/src/include directory for the existence of a file named "makefile_{MACH}.inc.in where {MACH} is the type of machine on which you are building If one exists, check the various compiler options and flag settings If one does not exist, copy one of the existing ones to a new name using your machine name and edit the compiler settings

  9. Installing the Software Run the installation script $SRCROOT/install_wrfsi.pl Example: /usr/bin/perl install_wrfsi.pl --installroot=$INSTALLROOT --srcroot=$SRCROOT --dataroot=$MOAD_DATAROOT --path_to_netcdf=$NETCDF --machine=MACH --path_to_perl=/usr/bin/perl MACH = the machine type corresponding to the makefile_{MACH}.inc.in file

  10. Installing the Software Create an $EXTDATAROOT Location for grib_prep output (allow at least 2 GB) Path will be set in wrfsi.nl as well Contains various subdirectories that will get created the first time wrfsi.pl is run: extprd log work

  11. Installing the Software Checking for successful installation Check $INSTALLROOT/bin for executables: grib_prep.exe gridgen_model.exe hinterp.exe vinterp.exe Check $INSTALLROOT/etc for scripts: wrfsi.pl grib_prep.pl interp.pl If any executables are missing, you can go to $SRCROOT/src and find subdirectories for each executable. From there you can try to make each one manually and observe the errors PLEASE REPORT ANY PROBLEMS AND THEIR CORRECTIVE ACTIONS!

  12. Configuring Domains Overview Using repository version of wrfsi.nl as domain namelist subset. Editing $SRCROOT/domains/’domain_name’/wrfsi.nl to your liking Set the horizontal domain specifications Running localization perl script $INSTALLROOT/etc/window_domain_rt.pl Checking for a successful localization

  13. Configuring Domains Use $SRCROOT/data/static/wrfsi.nl to make a domain namelist subsets for grid specification. Edit $SRCROOT/data/static/wrfsi.nl Replace namelist section “sfcfiles” with the paths to your geog data Eg., replace Topo_30s = /data/lapb/geog/world_topo_30s with Topo_30s = /your/path/to/geog/data/geog/world_topo_30s Create $SRCROOT/domains/”domain_name” “mkdir $SRCROOT/domains/’domain_name’” each domain you configure gets a new domain_name under subdirectory “domains”. Copy repository file “wrfsi.nl” to the domains/”domain_name” subdirectory “cp $SRCROOT/data/static/wrfsi.nl $SRCROOT/domains/”domain_name/. “

  14. Configuring Domains Edit $SRCROOT/domains/”domain_name”/wrfsi.nl project_id section (simulation_name and user_desc) hgridspec section (sets up horizontal domain) xdim = dimension in E-W direction ydim = dimension in N-S direction map_proj_name = 'lambert', 'mercator', or 'polar' moad_known_lat = center latitude (+ N) moad_known_lon = center longitude (+ E) moad_stand_lats = true latitude1 (lambert and polar), true latitude for lambert (set to +/- 90 for polar) moad_stand_lon = orientation longitude moad_delta_x = grid spacing in meters in x-direction moad_delta_y = grid spacing in meters in y-direction Recommend leaving all other settings at their default values Remove all namelist sections/variables that will not be different from the $SRCROOT version of wrfsi.nl

  15. Configuring Domains Running localization perl script “window_domain_rt.pl” Ensure your environment variables are properly set Run $INSTALLROOT/window_domain_rt.pl Required: -t = path to domain subset subdirectory; for example, $SRCROOT/domains/”domain_name” -w = the system you are localizing (always use –w wrfsi) Optional: “-s”, “-i”, and “-d” switches override the environment variables if necessary “-c” reconfigures the entire $MOAD_DATAROOT; ie., removes silog, siprd, static, and cdl. Without –c, only static and cdl are rewritten. Example command line: Perl window_domain_rt.pl –t $SRCROOT/domains/”domain_name” –w wrfsi

  16. Configuring Domains Checking for a successful localization The “window” script will issue one of the following: success: “window_domain_rt complete” failure: “Lines with error found in localize_domain.log” “ localization incomplete ” “window_domain_rt incomplete” Window output (text information) is in $MOAD_DATAROOT/silog/localize_domain.log

  17. Configuring Domains Checking for success Common Error conditions: Geog paths not properly set Not enough geog tiles to cover you domain (especially true if you only got one or two of the quarterspheres tar files) Other settings in wrfsi.nl not properly set. Note that “window” saves the static subdirectory (static_err) in the event of an error (you can check it) Check for existence of static file: $MOAD_DATAROOT/static/static.wrfsi netCDF file that can be viewed with ncdump utility

  18. Configuring Interpolation Overview Iinterp options Paths to GRIB data and $EXTDATAROOT

  19. Configuring Interpolation Grib_prep Options Set in $MOAD_DATAROOT/static/wrfsi.nl si_controls Set frequency of AVN and ETA grid receipt and typical delay after cycle time si_paths Set $EXTDATAROOT Set PATH_TO_AVN, PATH_TO_ETA grib file locations NOTE: Other sources can be used if you simply call the other source AVN or ETA. We will be making this more flexible in the future.

  20. Configuring Interpolation Grib_prep Options filetimespec Set start and stop times NOTE: This will be edited automatically if using the wrfsi.pl script to run the system. Variable selection from GRIB files via Vtables $MOAD_DATAROOT/static/Vtable.{SOURCE} {SOURCE} must match PATH_TO_{SOURCE} Contols selection of variables and levels based on GRIB codes Allows specification of name to use for each variable in output Vtable.AVN and Vtable.ETA provided in distribution

  21. Configuring Interpolation Interp Options Set in $MOAD_DATAROOT/static/wrfsi.nl interp_control PTOP_IN_PA: Top pressure level to consider from input data HINTERP_METHOD 0 = nearest neighbor (not recommended) 1 = 4-point linear 2 = 16-point quadratic INPUT_ROOT: Prefix of files in $EXTDATAROOT/extprd to use for dynamic data (set automatically when running wrfsi.pl) CONSTANTS_FULL_NAME: Full file names of data located in $EXTDATAROOT/extprd that contain values to be held constant for entire run VERBOSE_LOG: Set to true for more extensive logging Recommend leaving all other options as they come

  22. Configuring Interpolation Interp Options (Cont) OUTPUT_COORD: which vertical coordinate to use. Set to “ZETA” for height-based R-K WRF or “ETAP” for mass version. LEVELS: List of “full” vertical levels from bottom to top of atmosphere starting at 0 for “ZETA” and starting at 1.0 for “ETAP” OUTPUT_VARS: controls the final output: 1: Output for “REAL.exe” on Arakawa-C stagger 2: Same as 1 but with some extra variables 3: Output for “REAL.exe” on Arakawa-A stagger 4: Same as 3 but with some extra variables Leave all other settings as they are

  23. Running Set $MOAD_DATAROOT and $INSTALLROOT Ensure wrfsi.nl has correct extdataroot Ensure you have AVN or ETA data for the correct times available in the correct paths GRIB filenaming conventions recognized: FSL: yyjjjhhmmffff NCEP: ???.ThhZ.??????ff.???? NCEP: ???_yymmdd_hh_ff If your files do not conform to these naming conventions, the grib_prep script will assume every file is a possible match Ensure all previous domain configuration steps have been successfully completed

  24. Running Run the main driver script with 4 arguments: YYYYMMDDHH: Year, month, day, and hour UTC of model start time FF: Length of forecast to be produce in hours Source: AVN or ETA Window Name: A name for this run Example: cd $INSTALLROOT/etc wrfsi.pl 2001081612 24 ETA myrun You can optionally provide the dataroot and installroot using command line options -d and -i. wrfsi.pl -d /my/dataroot -i /my/installroot 2001081612 24 ETA myrun

  25. Running What happens when wrfsi.pl runs? The script edits $MOAD_DATAROOT/static/wrfsi.nl for run time and source of initialization The script calls grib_prep.pl to run grib_prep.exe The script calls interp.pl to run hinterp.exe and vinterp.exe Output ends up in $MOAD_DATAROOT/siprd A log file ends up in $EXTDATAROOT/log for the grib_prep run A log file ends up in $MOAD_DATAROOT/silog for the hinterp/vinterp runs.

  26. Running Did it run properly? Check for output in $MOAD_DATAROOT/siprd From previous run example, we should have: wrf_input.global.metadata wrf_input.d01.2001-08-16_12:00:00 wrf_input.d01.2001-08-16-15:00:00 wrf_input.d01.2001-08-16-18:00:00 ... wrf_input.d01.2001-08-17-12:00:00 Frequency of output files is set in filetimespec portion of wrfsi.nl If correct files are not present, check the log files to determine what went wrong.

  27. Running Checking the output Use the IDL routines in the $SRCROOT/util directory to read the hinterp/vinterp output files. Use the $INSTALLROOT/bin/siscan program to dump a summary of file contents (avaialble in latest version, not yet released) siscan {file} Other Notes of Interest Each executable can be run directly without the use of any scripts by simply setting the $MOAD_DATAROOT environment variable and ensuring the namelist is correct The interp.pl and gribprep.pl scripts can also be run directly without the use of wrfsi.pl

  28. Initializing the WRF Model Edit the WRF namelist.input file to make it consistent with the WRFSI domain configuration ztop, dx, dy, io_form, etc. Run the WRF real.exe routine using the WRFSI output files (wrf_input.*) as input You can then run the model! See Dave Gill's presentation for more details.

  29. Summary Setting up and running the WRFSI is most easily done by: Building the software Configuring your domain Running the wrfsi.pl script The system is flexible enough to run each component individually The WRFSI continues to be a work in progress New version will be released soon to support WRF LSM Domain configuration will be much easier with the use of templates and localization scripts in latest version More enhancements are planned and will be done as resources permit We welcome feedback, bug reports, etc.!

More Related