1 / 122

CGE Greenhouse Gas Inventory Hands-on Training Workshop WASTE SECTOR

CGE Greenhouse Gas Inventory Hands-on Training Workshop WASTE SECTOR. Overview. Introduction IPCC 1996GL ( Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories ) and GPG2000 ( Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories )

ozzie
Download Presentation

CGE Greenhouse Gas Inventory Hands-on Training Workshop WASTE SECTOR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CGEGreenhouse Gas Inventory Hands-on Training WorkshopWASTE SECTOR

  2. Overview • Introduction • IPCC 1996GL (Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories) and GPG2000 (Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories) • Reporting framework • Key category analysis and decision trees • Tier structure, selection and criteria • Review of problems • Methodological issues • Activity data • Emission factors • IPCC 1996GL category-wise assessment and GPG2000 options • Examination and assessment of activity data and emission factors: data status and options • Uncertainty estimation and reduction

  3. Introduction

  4. Introduction • COP2 adopted guidelines for preparation of initial national communications (decision 10/CP.2) • IPCC guidelines used by 106 NAI Parties to prepare national communications • New UNFCCC guidelines adopted at COP8 (decision 17/CP.8) provided improved guidelines for preparing GHG inventory • UNFCCC User Manual for guidelines on national communications to assist NAI Parties in using latest UNFCCC guidelines • Compilation and synthesis reports of NAI inventories highlighted several difficulties and limitations of using IPCC 1996GL (FCCC/SBSTA/2003/INF.10) • GPG2000 addressed some of the limitations and provided guidelines in order to reduce uncertainties

  5. Purpose of this Handbook • GHG inventories are mostly biological sectors, such as Waste, and characterized by: • methodological limitations • lack of data or low reliability of existing data • high uncertainty • This handbook aims at assisting NAI Parties in preparing GHG inventories using the IPCC 1996GL, particularly in the context of UNFCCC decision 17/CP.8, focusing on: • the need to shift to GPG2000 and higher tiers/methods to reduce uncertainty • complete overview of the tools and methods • use of IPCC inventory software and EFDB • review of AD and EF and options to reduce uncertainty • use of key cathegories, methodologies and decision trees

  6. Target groups • NAI inventory experts • National GHG inventory focal points

  7. NAI country examples • Analysis of national communications: Ethiopia, Ghana, Namibia, Nigeria, Morocco, South Africa and Uganda, • GHG inventories show that the Waste sector may be significant in NAI countries • Commonly a significant source of CH4 • In some cases a significant source of N2O • Solid waste disposal sites (SWDS) frequently a key category of CH4 emissions

  8. Definitions • Waste emissions – Includes GHG emissions resulting from waste management activities (solid and liquid waste management, excepting CO2 from organic matter incinerated and/or used for energy purposes). • Source – Any process or activity that releases a GHG (such as CO2, N2O, CH4) into the atmosphere.

  9. Definitions (2) • Activity Data – Data on the magnitude of human activity, resulting in emissions during a given period of time (e.g. data on waste quantity, management systems and incinerated waste). • Emission Factor – A coefficient that relates activity data to the amount of chemical compound that is the source of later emissions. Emission factors are often based on a sample of measurement data, averaged to develop a representative rate of emission for a given activity level under a given set of operating conditions.

  10. IPCC 1996GL andGPG2000 Approach and steps

  11. Emissions from waste management • Decomposition of organic matter in wastes (carbon and nitrogen) • Waste incineration (these emissions are not reported when waste is used to generate energy)

  12. Decomposition of waste • Anaerobic decomposition of man-made waste by methanogenic bacteria • Solid waste • Land disposal sites • Liquid waste • Human sewage • Industrial waste water • Nitrous oxide emissions from waste water are also produced from protein decomposition

  13. Land disposal sites • Major form of solid waste disposal in developed world • Produces mainly methane at a diminishing rate taking many years for waste to decompose completely • Also carbon dioxide and volatile organic compounds produced • Carbon dioxide from biomass not accounted or reported elsewhere

  14. Decomposition process • Organic matter into small soluble molecules (including sugars) • Broken down to hydrogen, carbon dioxide and different acids • Acids are converted to acetic acid • Acetic acid with hydrogen and carbon dioxide are substrate for methanogenic bacteria

  15. Methane from land disposal • Volumes • Estimates from landfills: 20–70 Tg/yr • Total human methane emissions: 360 Tg/yr • From 6% to 20% of total • Other impacts • Vegetation damage • Odours • May form explosive mixtures

  16. Characteristics of the methanogenic process • Highly heterogeneous • However, relevant factors to consider: • Waste management practices • Waste composition • Physical factors

  17. Waste management practices • Aerobic waste treatment • Produces compost that may increase soil carbon • No methane • Open dumping • Common in developing regions • Shallow, open piles, loosely compacted • No control for pollutants, scavenging frequent • Anecdotal evidence of methane production • An arbitrary factor, 50% of sanitary land filling, is used

  18. Waste management practices (II) • Sanitary landfills • Specially designed • Gas and leakage control • Scale economy • Continued methane production

  19. Waste composition • Degradable organic matter can vary • Highly putrescible in developing countries • In developed countries, due to higher paper and card content, less putrescible • This affects stabilization and methane production • Developing countries: 10–15 years • Developed countries: more than 20 years

  20. Physical factors • Moisture essential for bacterial metabolism • Factors: initial moisture content, infiltration from surface and groundwater, as well as decomposition processes • Temperature: 25–40°C required for a good methane production

  21. Physical factors (II) • Chemical conditions • Optimal pH for methane production: 6.8 to 7.2 • Sharp decrease of methane production below 6.5 pH • Acidity may delay the onset of methane production • Conclusion • Data availability is too poor to use these factors for national or global methane emissions estimates

  22. Methane emissions • Depend on several factors • Open dumps require other approaches • Availability and quality of relevant data

  23. Waste-water treatment • Produces methane, nitrous oxide and non-methane volatile organic compounds • May lead to storage of carbon through eutrophication

  24. Methane emissions from waste-water treatment • From anaerobic processes without methane recovery • Volumes • 30–40 Tg/yr • About 8%–11% of anthropogenic methane emissions • Industrial emissions estimated at 26–40 Tg/yr • Domestic and commercial estimated at 2 Tg/yr

  25. Factors for methane emissions • Biochemical oxygen demand (BOD) (+/+) • Temperature ( >15°C) • Retention time • Lagoon maintenance • Depth of lagoon ( >2.5 m, pure anaerobic; less than 1 m, not expected to be significant, most common facultative 1.2 to 2.5 m – 20% to 30% BOD anaerobically)

  26. Biochemical oxygen demand • Is the organic content of waste water (“loading”) • Represents O consumed by waste water during decomposition (expressed in mg/l) • Standardized measurement is the “5-day test” denoted as BOD5 • Examples of BOD5: • Municipal waste water 110–400 mg/l • Food processing 10 000–100 000 mg/l

  27. Main industrial sources • Food processing: • Processing plants (fruit, sugar, meat, etc.) • Creameries • Breweries • Others • Pulp and paper

  28. Waste incineration • Waste incineration can produce: • Carbon dioxide, methane, carbon monoxide, nitrogen oxides, nitrous oxides and non-methane volatile organic compounds • Nevertheless, it accounts for a small percentage of GHG output from the waste sector

  29. Emissions from waste incineration • Only the fossil-based portion of waste to be considered for carbon dioxide • Other gases difficult to estimate • Nitrous oxide mainly from sludge incineration

  30. IPCC 1996GL • Basis of inventory methodology for waste sector is: • Organic matter decomposition • Incineration of fossil origin organic material • Does not include concrete calculations for the latter • Organic matter decomposition covers: • Methane from organic matter in both liquid and solid wastes • Nitrous oxide from protein in human sewage • Emissions of non-methane volatile organic compounds are not covered

  31. IPCC default categories • Methane Emissions from Solid Waste Disposal Sites • Methane Emissions from Wastewater treatment • Domestic and Commercial Wastewater • Industrial Wastewater and Sludge Streams • Nitrous oxide from Human Sewage

  32. Inventory preparation using IPCC 1996GL • Step 1: Conduct key category analysis for Waste sector where: • Sector is compared to other source sectors such as Energy, Agriculture, LUCF, etc. • Estimate Waste sector’s share of national GHG inventory • Key category identification adopted by Parties that have already prepared an initial national communication, have inventory estimates • Parties that have not prepared an initial national communication can use inventories prepared under other programs/projects • Parties that have not prepared any inventory, may not be able to carry out the key category analysis • Step 2:Select the categories

  33. Inventory preparation using IPCC 1996GL (2) • Step 3: Assemble required activity data depending on tier selected from local, regional, national and global databases, including EFDB • Step 4: Collect emission/removal factors depending on tier level selected from local/regional/national/global databases, including EFDB • Step 5: Select method of estimation based on tier level and quantify emissions/removals for each category • Step 6: Estimate uncertainty involved • Step 7: Adopt quality assurance/control procedures and report results • Step 8: Report GHG emissions • Step 9: Report all procedures, equations and sources of data adopted for GHG inventory estimation

  34. Calculation of methane from solid waste disposal • For sanitary landfills there are several methods: • Mass balance and theoretical gas yield • Theoretical first order kinetics methodologies • Regression approach • Complex models not applicable for regions or countries • Open dumps considered to emit 50%, but should be reported separately

  35. Mass balance and theoretical gas yield • No time factors • Immediate release of methane • Produces reasonable estimates if amount and composition of waste have been constant or slowly varying, otherwise biased trends • How to calculate: • Using empirical formulae • Using degradable organic content

  36. Empirical formulae • Assumes 53% of carbon content is converted to methane • If microbial biomass is discounted it reduces the amount emitted • 234 m3 of methane per tonne of wet municipal solid waste

  37. Using degradable organic content (Base of Tier 1) • Calculated from the weighted average of the carbon content of various components of the waste stream • Requires knowledge of: • Carbon content of the fractions • Composition of the fractions in the waste stream • This method is the basis for the Tier I calculation approach

  38. Equation • Methane emission = (Total municipal solid waste (MSW) generated (Gg/yr) x Fraction landfilled x Fraction degradable organic carbon (DOC) in MSW x Fraction dissimilated DOC x 0.5 g C as CH4/g C as biogas x Conversion ratio (16/12) ) – Recovered CH4

  39. Assumptions • Only urban populations in developing countries need be considered; rural areas produce no significant amount of emissions • Fraction dissimilated was assumed from a theoretical model that varies with temperature: 0.014T + 0.28, considering a constant 35°C for the anaerobic zone of a landfill, this gives 0.77 dissimilated DOC • No oxidation or aerobic process included

  40. Example • Waste generated 235 Gg/yr • % landfilled 80 • % DOC 21 • % DOC dissimilated 77 • Recovered 1.5 Gg/yr • Methane =(235*0.80*0.21*0.77*0.5*16/12) – 1.5 =19 Gg/yr

  41. Limitations • Main: • No time factor • No oxidation considered • DOC dissimilated too high • Delayed release of methane under increasing waste landfilled conditions leads to significant overestimations of emissions • Oxidation factor may reach up to 50% according to some authors, a 10% reduction is to be accounted

  42. Default method – Tier 1 • Includes a methane correction factor according to the type of site (waste management correction factor). Default values range from 0.4 for shallow unmanaged disposal sites (> 5m) to 0.8 for deep (<5m) unmanaged sites; and 1 for managed sites. Uncategorized sites given a correction factor of 0.6 • The former DOC dissimilated was reduced from 0.77 to 0.5 - 0.6, due to the presence of lignin

  43. Default method – Tier 1 • The fraction of methane in landfill gas was changed from 0.5 to a range between 0.4 and 0.6, to account for several factors, including waste composition • Includes an oxidation factor. Default value of 0.1 is suitable for well managed landfills • It is important to remember to subtract recovered methane before applying an oxidation factor

  44. Default method – Tier 1 Good Practice • Emissions of methane (Gg/yr) = [(MSWT*MSWF*L0) -R]*(1-OX) where MSWT= Total municipal solid waste MSWF= Fraction disposed at SWDS L0 = Methane generation potential R = Recovered methane (Gg/yr) OX = Oxidation factor (fraction)

  45. Methane generation potential L0 = (MCF*DOC*DOCF*F*16/12 (GgCH4/Gg waste)) where: MCF = Methane correction factor (fraction) DOC = Degradable organic carbon DOCF = Fraction of DOC dissimilated F = Fraction by volume of methane in landfilled gas 16/12 = Conversion from C to CH4

  46. Other approaches • Include a fraction of dry refuse in the equation • Consider a waste generation rate (1 kg per capita per day for developed countries, half of that for developing countries) • Use gross domestic product as an indicator of waste production rates

  47. GPG2000 Approach

  48. Theoretical first order kinetics methodologies (Tier 2) • Tier 2 considers the long period of time involved in the organic matter decomposition and methane generation • Main factors: • Waste generation and composition • Environmental variables (moisture content, pH, temperature and available nutrients) • Age, type and time since closure of landfill

  49. Base equation • QCH4 = L0R(e-kc - e-kt) QCH4 = methane generation rate at year t (m3/yr) L0 = degradable organic carbon available for methane generation (m3/tonne of waste) R = quantity of waste landfilled (tonnes) k = methane generation rate constant (yr-1) c = time since landfill closure (yr) t = time since initial refuse placement (yr)

  50. Good practice equation • Time t is replaced by t-x, normalization factor that corrects for the fact that the evaluation for a single year is a discrete time rather than a continuous time estimate • Methane generated in year t (Gg/yr) = Sx [(A*k*MSWT(x)*MSWF(x)*L0(x)) * e-k(t-x) ] for x = initial year to t • Sum the obtained results for all years (x)

More Related