1 / 51

Overview

Assessing Risk from Environmental Exposure to Waterborne Pathogens: Use of Dynamic, Population-Based Analytical Methods and Models May 11, 2005.

orsin
Download Presentation

Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Assessing Risk from Environmental Exposure to Waterborne Pathogens: Use of Dynamic, Population-Based Analytical Methods and ModelsMay 11, 2005 This lecture is based on lecture material prepared by Prof. Joe Eisenberg, formerly of the University of California-Berkeley and now at the University of Michigan Used with his permission

  2. Overview • Role of water in disease burden • Water as a route of disease transmission • Methods of risk estimation • Direct: intervention trials • Indirect: risk assessment • Population-level risks • Example: the Milwaukee outbreak

  3. Importance of Waterborne Pathogens Domestic: U.S. interest in water quality • 1993 Cryptosporidium outbreak • Increasing number of disease outbreaks associated with water • Congressional mandates for water quality • (Safe Drinking Water Act) • Emphasis on risk assessment and regulation

  4. Importance of Waterborne Pathogens Worldwide: WHO interest in water quality • Estimating GBD associated with water, sanitation, and hygiene • Diarrheal diseases are a major cause of childhood death in developing countries. • 3 million of the 12.9 million deaths in children under the age of 5 attributable to diarrheal disease • Emphasis on intervention and control

  5. Pathways of Transmission • Person-person • Mediated through fomites (e.g., phone, sink, etc.) • Often associated with hygiene practices • Person-environment-person • Mediated through water, food, or soil • Contamination can occur through improper sanitation (example: sewage inflow into drinking water source or lack of latrines) • Animals are often sources (Zoonotic pathogens) • Exposure can occur through improper treatment of food or water

  6. The Disease Transmission Process Risk estimation depends on transmission dynamics and exposure pathways Transport to other water sources Agricultural Runoff Drinking Water Recreational Waters or Wastewater reuse Animals 2° Trans. Food

  7. Approaches to Risk Estimation • Direct approach: The intervention trial • Can be used to assess risk from drinking water and recreational water exposures • Problems with sensitivity (sample size issue) • Trials are expensive. • Indirect approach: Mathematical models • Must account for properties of infectious disease processes • Pathogen specific models • Uncertainty and variability may make interpretation difficult.

  8. Approaches to Risk Estimation • Combining direct and indirect approaches • Models can define the issues and help design studies. • Epidemiology can confirm current model structure and provide insight into how to improve the model.

  9. Approaches for Risk Estimation: Direct estimates of waterborne infectious illnesses • Surveillance: count waterborne infectious illnesses • How can a waterborne disease outbreak be distinguished from other outbreak causes (food, fomites, etc.)? • What about endemic disease? • Observational • Ecologic studies (e.g., serosurvey comparing communities with and without filtration). • Time series (e.g., correlation between turbidity and hospitalization data)

  10. Approaches for Risk Estimation:Distinguishing waterborne GI disease from other GI diseases • Methods for addressing the question • In a single community: a randomized, blinded, placebo-controlled trial • design provides an estimate of the effectiveness of a drinking water intervention. • Basic study design: two groups • “Exposed” group = normal tap water. • “Treated” group = use a water treatment device to provide water as pathogen-free as technically possible

  11. Approaches for Risk Estimation: A Tap Water Intervention Trial • Enroll 1000 subjects • 500 receive an active home water treatment device (and carry drinking water to work, etc. when practical) • 500 receive a “placebo” home water drinking device (does nothing to change the water) • Follow the subjects for one year with daily logs of GI illness • Alternative design: Each household changes device type after 6 months.

  12. Approaches for Risk Estimation: A Tap Water Intervention Trial • Placebo group (tap water): • 90 illnesses over course of the study • “Rate” = 90 / 500 Rate in placebo group = 0.18 per person per year • Treated group (active device): • 60 illnesses in the treated group (active device) • “Rate” = 60 / 500 Rate in treated group = 0.12 per person per year

  13. Approaches for Risk Estimation: Epidemiologic Measures • Relative Risk (RR) Incidence in exposed group Incidence in unexposed group Interpretation: the risk of disease in the tap water group is 1.5 times higher than that of the treated group

  14. Approaches for Risk Estimation: Epidemiologic Measures • Attributable Risk (AR) Incidence in exposed – Incidence in unexposed Interpretation: There are 6 excess cases of disease per 100 subjects receiving tap water

  15. Approaches for Risk Estimation: Epidemiologic Measures • Attributable Risk Percent (AR%) Excess cases in exposed Incidence in exposed Interpretation: 33% of the cases of disease in the tap water group are due to water

  16. Approaches for Risk Estimation: Epidemiologic Measures • To generalize beyond the cohort, need an estimate of the community incidence. • PAR: population attributable risk • PAR%: population attributable risk % • AR compares completely protected group with completely unprotected group. • PAR incorporates intermediate exposure

  17. Approaches for Risk Estimation: Epidemiologic Measures • Population attributable risk • Incidence in the community–incidence in the unexposed Interpretation: In the community, 2 excess cases of disease per every 100 subjects in the community

  18. Approaches for Risk Estimation: Epidemiologic Measures • Population attributable risk percentage Excess cases in the community Incidence in the exposed Interpretation: 14% of the cases of disease in the community are due to tap water

  19. Approaches for Risk Estimation: Tap Water Intervention Trials Trials in immunocompetent populations • Canada (Payment)--challenged surface water • AR = 0.35 (Study 1), 0.14-0.4 (Study 2) • Australia (Fairley)--pristine surface water • No effect • Walnut Creek (UCB) – pilot trial • AR = 0.24 (non-significant effect) • Iowa (UCB)--challenged surface water • No effect Trials in sensitive populations • HIV+ in San Francisco (UCB)--mixed sources • Elderly in Sonoma (UCB)--intermediate quality surface

  20. Approaches for Risk Estimation: Tap Water Intervention Trials • Davenport, Iowa study • Comparing sham vs. active groups • AR = - 365 cases/10,000/year (CI: -2555, 1825) • Interpretation: No evidence of a significantly elevated drinking water risk • Is the drinking water safe?

  21. Approaches for Risk Estimation: Risk Assessment vs. Intervention Trial Comparing estimates from a risk assessment to randomized trial results (Eienberg et al. AJE, submitted) • Data collected during the intervention trial • Self-report illnesses from participants: Weekly diaries • Source water quality: Cryptosporidium, Giardia, enteric viruses • Drinking water patterns: RDD survey • Water treatment: B. subtilis, somatic coliphage

  22. Approaches for Risk Estimation: Risk Assessment Model

  23. Approaches for Risk Estimation: Risk Assessment Model

  24. Approaches for Risk Estimation: Risk Assessment Results Overall risk estimate: 14 cases/10,000/yr

  25. Approaches for Risk Estimation: Comparison/Conclusions Table 3. Comparison of risk assessment and intervention trials

  26. Microbial Risk Assessment • Two classes of risk assessment models • Individual-based • Population-based • Individual-based estimates • Risk estimates assume independence among individuals within the population • Chemical risk paradigm • Focus is on direct risks • Probability of disease for a given individual • This probability can be either daily, yearly, our lifetime.

  27. Microbial Risk Assessment • Chemical risk paradigm • Hazard identification, exposure assessment, dose response, risk characterization • Model structure where P = probability that a single individual, exposed to N organisms, will become infected or diseased. • Exposure calculation:

  28. Microbial Risk Assessment Alternative framework: risk estimates at the population level allow for the inclusion of indirect risks due to secondary transmission Transport to other water sources Agricultural Runoff Drinking Water Recreational Waters or Wastewater reuse Animals 2° Trans. Food

  29. Microbial Risk AssessmentEisenberg et al. AJE 2005 • Transmission pathways • Example: a Cryptosporidium outbreak in Milwaukee Wisconsin, 1993 • Competing hypotheses on the cause • Oocyst contamination of drinking water influent coupled with treatment failure • Chemical risk paradigm may be sufficient (still need to consider secondary transmission) • Amplification of oocyst concentrations in the drinking water influent due to a person-environment-person transmission process • Chemical risk paradigm cannot address this potential cause of the outbreak

  30. A model of disease transmission: The SIR model • Mathematical modeling of a population where individuals fall into three main categories: • Susceptible (S) • Infectious (I) • Recovered (R) • Different individuals within this population can be in one of a few key states at any given time • Susceptible to disease (S) • infectious/asymptomatic (I) • infectious/symptomatic (I) • non-infectious/asymptomatic; recovered (R) • A dynamic model: individuals are moving from state to state over time

  31. The SIR model: key details There are two sets of variables: • Variables describing the states people are in • S=susceptible • I=infectious • R=non-infectious/asymptomatic • Variables describing how many people are moving between these states (parameters) • Example: γ=Fraction of people in state R who move tostate S

  32. S R W ENVIRONMENT The SIR Model g  d I • S: Susceptible • I: Infectious (symptomatic+asymptomatic) • R: Non-infectious • W: Concentration of pathogens in the environment • β: Infection rate due to exposure to pathogen • δ: Fraction of people who move from state I to state R • γ: Fraction of people who move from state R to state S • Solid lines: Individuals moving from state to state • Dashed lines: Pathogen flows between individuals in different states

  33. Z μ a 0+ (W) (ρ) Y X ρ σ λ W D The SIR Model: slightly different version g The variables • X: susceptible • Y: infectious/asymptomatic • Z: non-infectious/asymptomatic • D: infectious/symptomatic • W: concentration of pathogens at the source • a: number of new susceptible individuals migrating in δ+μ

  34. g Z μ a 0+ (W) (ρ) Y X ρ σ λ W D The SIR Model: slightly different version (cont) δ+μ The parameters • ρ: fraction in state Y who move to state D • α: Fraction in state Y who move to state Z • σ: Fraction in state D who move to state Z • γ: Fraction in state Z who move to state X • δ: Fraction in state D who die • μ: Fraction who die of natural causes • λ: Numbers of pathogen shed per infectious/asymptomatic individual • β0 : Baseline transmission rate • β : Infection rate due to pathogen

  35. Dynamic Modeling of Disease Transmission: an example • Remember: a derivative is a rate of change • X= the population of individuals susceptible to a disease • dX/dt = rate of change in the susceptible population • The equation describes individuals moving in and out of the susceptible population • Each variable represents some number of individuals moving • into the susceptible population (+) from some other group, • out of the susceptible population (-) to some other group

  36. Dynamic Modeling of Disease Transmission: an example • a= number of susceptible individuals migrating into the population • γZ =number of non-infectious/asymptomatic individuals migrating back into the susceptible population • μX =Fraction of susceptible individuals who drop out of the susceptible population because they die of natural causes • β0X =number of susceptible individuals who become infected and drop out of the susceptible population • β(W)X =number of susceptible people becoming ill due to pathogen exposure and drop out of the susceptible population

  37. Analysis of Disease Transmission Models • Traditional approaches to evaluating dynamics models are qualitative • Stability analysis, threshold estimates (Ro), qualitative fits • Statistics rarely used to analyze output • Methodological goal to obtain public health relevant estimates of the outbreak • Need to modify traditional statistical techniques to address models with large number of parameters, sparse data, and collinearity

  38. Analysis of Disease Transmission Models Likelihood • Traditional likelihood methods • Difficult to find maximum likelihood point in highly parameterized models. • Confidence intervals are often not possible in complex likelihood spaces • Profile likelihood is an alternative option • Fix a subset of the parameters across a grid of values. • At each point in the grid the remaining parameters are maximized. Bayesian techniques • Practical for combining outbreak data with existing information about parameters. • Modifications required to deal with collinearities

  39. Model 1 Goals: • To examine the role of person-person (secondary) transmission • To estimate the fraction of outbreak cases associated with person-person (secondary) transmission

  40. IA(t) Infectious (asymptomatic) S(t) Susceptible r ... p p p p E1 E2 Ek R(t) Removed d  + S 1-r IS(t) Infectious (symptomatic) Latently Infected W(t) Environmental Transmission Cryptosporidium Outbreak - Model Diagram S: Susceptible W: Concentration of Pathogens in the Environment IS: Symptomatic and Infectious IA: Asymptomatic and Infectious R: Immune/ Partially Protected Solid: Individual Flows from State to State Dashed: Pathogen Flows

  41. Analysis - Model 1 Monte Carlo Markov Chain (MCMC) was used to generate a posterior distribution. • Two step procedure was used to address collinearities of the parameter estimates • MCMC at profiled points • Second MCMC on draws from first MCMC • Cumulative incidence, I1, was produced by a random draw of the posterior • Cumulative incidence, I0, was produced by first setting bs=0 then obtaining a random draw of the posterior. • The attributable risk associated with secondary transmission was I1- I0

  42. Risk Attributable to Secondary Transmission 10% , 95% CI [6, 21]

  43. Model 2 Goal: • To examine the role of person-environment-person transmission • To estimate the preventable fraction due to an increase in distance between wastewater outlet and drinking water inlet • Examine preventable fraction as a function of transport time parameter, d • Where d is a surrogate for the potential intervention of moving the drinking water inlet farther from the wastewater outlet

  44. IA(t) Infectious (asymptomatic) S(t) Susceptible r ... p p p p E1 E2 Ek R(t) Removed d  + S 1-r IS(t) Infectious (symptomatic) Latently Infected W(t) Environmental Transmission Cryptosporidium Outbreak- Model Diagram S: Susceptible W: Concentration of Pathogens in the Environment IS: Symptomatic and Infectious IA: Asymptomatic and Infectious R: Immune/ Partially Protected Solid: Individual Flows from State to State Dashed: Pathogen Flows

  45. Analysis - Model 2 • Estimate the likelihood for different values of d, ranging from 1 - 40 days. • Estimate the attack rate (AR) for the MLE parameters • Estimate the AR for different values of d, keeping all other parameters constant at their MLE values. • Plot PFd = 1 - ARMLE / ARd

  46. Profile Likelihood of the Delay Parameter MLE for the time between contamination of sewage and exposure from drinking water tap was 11 days (95% CI [8.3, 19])

  47. Preventable Fraction As a Function of Delay Time Predicting the public health benefits of moving the drinking water inlet

  48. Conclusions • Secondary transmission was small. • Best guess is 10%, most likely less than 21% • Consistent with empirical findings of McKenzie et al. • Kinetics of the outbreak in Milwaukee were too quick to be driven solely by secondary transmission

  49. Conclusions • Person-water-person transmission as the main infection pathway has not been well studied • Few data exist that examines person-water-person transmission • Studies have demonstrated a correlation between cases of specific viral serotypes in humans and in sewage • Provides information on a potentially important environmental intervention

  50. Conclusions: Methods Analyzing disease transmission models using statistical techniques • Allows inferences about parameters that are interesting and relevant • Can get at posterior distribution that allows for calculation of relevant public health measures • Requires the modification of existing techniques • Profile likelihood to deal with large numbers of parameters • Bayesian estimation techniques to address the co-linearity.

More Related