1 / 20

Join forces with

Join forces with . To bring you this exciting breakthrough technology…. NFSI Super System. Our Mission. Is to provide our customers the best new technologies and select existing technologies with honesty and integrity. NFSI can design drilling fluid programs for all types of wells. .

omer
Download Presentation

Join forces with

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Join forces with To bring you this exciting breakthrough technology…

  2. NFSI Super System

  3. Our Mission Is to provide our customers the best new technologies and select existing technologies with honesty and integrity. NFSI can design drilling fluid programs for all types of wells.

  4. Environmentally Friendly NFSI Super System NFSI Super System

  5. Benefits Ease of application Formation compatibility Contaminant friendly Enhanced borehole stability

  6. Advantages NFSI SYSTEM INVERT Gauged Hole Resistance to Chemical Contamination Lubricity Excellent Hole Cleaning No disposal problems (passed Microtox EC50 Bioassay) LC50 No aromatics to cause harm to rig personnel No extra rigging up costs required Less Expensive (equipment rental, trucking) Solids Tolerance Gauged Hole Resistance to Chemical Contamination Drilling water sensitive shale's Lubricity Fast Penetration Rates Solids Tolerance

  7. Composition of NFSI System NFS-VISCAPSULETM Viscosifier NFS-FILTRATECAPSULETM Filtrate Control NFS-SHALECAPSULETM Shale Stabilizer NFS-TORQCAPSULETM Friction Reducer NFS-LUBRACAPSULETM Accelerator / ROP Enhancer

  8. Composition of NFSI System NFS-VISCAPSULETM Viscosifier NFS-FILTRATECAPSULETM Filtrate Control NFS-SHALECAPSULETM Shale Stabilizer NFS-TORQCAPSULETM Friction Reducer NFS-LUBRACAPSULETM Accelerator / ROP Enhancer Before Shale Exposure After Hot Roll and Drying Sample from Arkansas

  9. Economics Significantly lower total cost per barrel Lower transportation cost No environmental clean-up cost Availability of fresh or seawater as base fluid No cuttings transportation cost Low maintenance cost

  10. Economics Significantly lower total cost per barrel

  11. NFS-Super System Invert

  12. Well Recap Location: Woodville, TX Well name: ETOC T. Hole Total depth: 7300’ Casing 9/58” and 7/78” Mud System: NFS-Super System Water base. Drilled a 12/25” surface hole to 1750’ with conventional gel/water mud. Sat the surface casing 9/58” casing and tested the casing. --Cleaned the mud tanks and filled with freshwater and began additions of NFS-Super System. --Added 10 ppb of NFS-Viscapsule, 1% by volume NFS-Shalecapsule, followed by 1% by volume NFS-Torqcapsule. --Maintained a 31-34 funnel viscosity and drilled cement with the new mud system. Drilled approximately 120’ cement without any contamination. --Began drilling the 8¾” hole with super system from 1750’ to 2800’. Maintained chemical addition except for NFS-Shalecapsule; at this point mud viscosity was too high. Water was added to the system and the desander/desilter was started.

  13. --Drilling stopped and pulled the bit to casing and began to circulate and conditioned mud. Added large volume of water and additions of NFS-Viscapsule, NFS-Shalecapsule and NFS-Torqcapsule; time to condition mud was approximately 4 hours. --Mud was conditioned and resumed drilling operation. Drilling continued at the fast rate of penetration (drilled 1200’ in approximately 12 hours) --Drilled the 8 ¾” to 6500’ and increased mud density to 9.6 ppg from 9.1 ppg using barite. Chemical addition continued to maintain a <6 cc filtrate. --Drilling continued to 7300’ total depth. Circulated bottoms up, made a short trip, back to bottom with no fill. --Pulled the bit out of hole and ran successful logs to bottom, no fill. Ran the casing bottom, no fill. Well Recap continued

  14. Conclusion: NFS-Super System was used successfully to drill this 7300’ well in record time. Total drilling days were reduced by two days, a gage hole was drilled and logged the well successfully. Surface hole from 1750’ to approximately 6500’ had lots of reactive shale and clay, which was encapsulated with the NFS-Super System. While drilling cement, no contamination was observed; in addition the shale shakers handled the flow rate without any gumbo sticking to the screens. Important information to apply for future wells: A: Run MBT every 1000-1500’ of new hole drilled. Maintain a MBT of <10 B: Run good stream of water at shaker while your drilling, any other water base muds, 15% to 20% dilution C: Run shaker screens of 150 to 210 mesh, plus run desander/desilter as long as possible WellRecapcontinued

  15. Conclusion This new and revolutionary water based system is nowavailable. NFSI is excited, prepared, and anxiouslyawaiting to help meet your drilling needs. NFSI currently has finished product available in inventorylocated in Houston, TX. 713-780-3600 www.newfluid.com

  16. Questions?

More Related