1 / 14

Control of Nonconforming Product

Control of Nonconforming Product. Basic Level Requirements for Food Manufacture. The organisation shall ensure that any product, which does not conform to requirements, is clearly identified and controlled to prevent unintended use or delivery. Presentation Outline. Definitions

olwen
Download Presentation

Control of Nonconforming Product

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Control of Nonconforming Product

  2. Basic Level Requirements for Food Manufacture • The organisation shall ensure that any product, which does not conform to requirements, is clearly identified and controlled to prevent unintended use or delivery.

  3. Presentation Outline • Definitions • Requirements for Nonconforming Products • Management and Records

  4. Definition Nonconforming Product • Food product produced during a loss of control that necessitates a correction. • Includes all product back to the last valid determination that the process was under control.

  5. Requirements for Nonconforming Products • Actions will be taken to prevent the nonconforming product from entering the food chain unless it can be assured that: • The food safety hazard(s) of concern has(have) been reduced to the defined acceptable levels, • The food safety hazard(s) of concern will be reduced to identified acceptable levels prior to entering the food chain, or • The product still meets the defined acceptable level(s) of the food safety hazard(s) of concern despite the nonconformity.

  6. Requirements for Nonconforming Products • All lots of product affected by a nonconforming situation shall be held under control of the organization until they have been evaluated. • If products that have left control of the organization are subsequently determined to be unsafe, the organization shall notify relevant interested parties and initiate a withdrawal. • The controls and related responses and authorization for dealing with potentially unsafe products shall be documented.

  7. ISO 22000:2005Evaluation for Release Each lot of product affected by the nonconformity shall only be released as safe when any of the following apply: • Evidence other than the monitoring system demonstrates that the control measures have been effective. • Evidence shows that the combined effect of the control measures for that particular product complies with the performance intended. • The results of sampling, analysis and/or other verification activities demonstrate that the affected lot of product complies with the identified acceptable levels for the food safety hazard(s) concerned.

  8. ISO 22000:2005Disposition of Nonconforming Products • Following evaluation, if the lot of product is not acceptable for release it shall be handled by one of the following activities: • Reprocessing or further processing within or outside the organization to ensure that the food safety hazard is eliminated or reduced to acceptable levels. • Destruction and/or disposal as waste.

  9. ISO 22000:2005Withdrawals • To enable and facilitate the complete and timely withdrawal of lots of end products which have been identified as unsafe: • Top management shall appoint personnel having the authority to initiate a withdrawal and personnel responsible for executing the withdrawal, and • The organization shall establish and maintain a documented procedure for: • Notification to relevant interested parties • Handling of withdrawn products as well as affected lots of the products still in stock, and • The sequence of actions to be taken.

  10. ISO 22000:2005Withdrawals • Withdrawn products shall be secured or held under supervision until they are destroyed, used for purposes other than originally intended, determined to be safe for the same (or other) intended use, or reprocessed in a manner to ensure they become safe.

  11. Summary • Determine if the product presents a safety hazard, based on: • Expert evaluation • Biological, chemical, or physical testing • If no hazard exists, the product may be released • If a potential hazard exists, determine if the product can be: • Reworked/reprocessed • Diverted for an alternate use • If potentially hazardous product cannot be handled as described in Step 3, the product must be destroyed

  12. Records • Records for corrective actions and nonconformities must include: • The actual production records for the product • A standard form listing the following: • Hold number, deviation, reason for hold, date and code of product held, name of responsible individual • Authority recommendations on final disposition of product in question • Accurate accounting of all units in question • Statement of the procedure for handling the nonconformity

  13. Questions?

  14. License to Reuse • © 2009 Michigan State University, licensed under Creative Commons Attribution-Share Alike 3.0 Unported (CC-BY-SA). • Source: © 2009 Michigan State University, original at http://www.fskntraining.org, licensed under Creative Commons Attribution-Share Alike 3.0 Unported. • To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA.

More Related