1 / 12

Research progress

Research progress. Arjan Klem 1211366. Concept &hypothesis. How to create a structural concrete facade that is transparent enough to get a good amount of daylight in and is not made of standardized elements?

Download Presentation

Research progress

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Research progress Arjan Klem 1211366

  2. Concept &hypothesis • How to create a structural concrete facade that is transparent enough to get a good amount of daylight in and is not made of standardized elements? • The growth of a bone structure is nature’s example of a structure reacting to forces applied to it.

  3. Topology optimization; Optimize a shape to the forces applied to it, using the minimum amount of material. • A free 2d example program was used to experiment a little with this. • www.topopt.dtu.dk

  4. Things I had to do: - Calculate the forces on a standard building - Find a optimization program to calculate the façade of this building The building: 20x20x12 meters Wind load: 1kN/m² Chosen façade thickness: 300mm - This resulted in the input for a program

  5. As the optimization program I use Diana with a optimization script I received from dr. ir. Max Hendriks, who has done some research about optimization in Diana. • Now I had to model the input. Optimization in Diana, Max hendriks, May 2007

  6. Some factors are affecting the results: • Mesh Type (triangular/Quadratic) • Mesh division (finer=accurate but slow) • Number of iterations; Every node can be reduced 7 times so the maximum number of iterations is 7*nodes. Sow a finer mesh causes exponentionally more calculating time.

  7. Results of a triangular 24x24 mesh using 50000 iterations

  8. Now it raises the question if the Diana calculations are correct: I should somehow create a real model and test it and compare the results with the Diana output. -Downside of using Diana: Calculation times become very long to get accurate results

More Related