1 / 29

Damping Ring BPM Developments Upgrade of the ATF Damping Ring BPMs & Beam Tests

Damping Ring BPM Developments Upgrade of the ATF Damping Ring BPMs & Beam Tests. Manfred Wendt Fermilab for the ATF DR BPM Upgrade Collaboration. Agenda. Motivation The ATF Damping Ring Details of the BPM read-out electronics upgrade Beam studies and performance measurements Conclusions.

oistin
Download Presentation

Damping Ring BPM Developments Upgrade of the ATF Damping Ring BPMs & Beam Tests

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Damping Ring BPM DevelopmentsUpgrade of the ATF Damping Ring BPMs & Beam Tests Manfred Wendt Fermilab for the ATF DR BPM Upgrade Collaboration CLIC08 Workshop

  2. Agenda • Motivation • The ATF Damping Ring • Details of the BPM read-out electronics upgrade • Beam studies and performance measurements • Conclusions CLIC08 Workshop

  3. ATF DR BPM Collaboration KEK • Nobuhiro Teranuma • Junji Urakawa SLAC • Doug McCormick • Joe Frisch • Justin May • Janice Nelson • Andrei Seryi • Tonee Smith • Mark Woodley • Fermilab • Charlie Briegel • Nathan Eddy • ElianaGianfelice • Bill Haynes • Peter Prieto • Dennis Nicklaus • Ron Rechenmacher • Duane Voy • Manfred Wendt • …and many others (Marc Ross!) CLIC08 Workshop

  4. Motivation • ILC damping ring R&D at KEK’s Accelerator Test Facility (ATF): • Investigation of the beam damping process (damping wiggler, minimization of the damping time, etc.) • Goal: generation and extraction of a low emittance beam (εvert < 2 pm) at the nominal ILC bunch charge • A major tool for low emittance corrections: a high resolution BPM system • Optimization of the closed-orbit, beam-based alignment (BBA) studies to investigate BPM offsets and calibration. • Correction of non-linear field effects, i.e. coupling, chromaticity,… • Fast global orbit feedback(?) • Necessary: a state-or-the-art BPM system, utilizing • a broadband turn-by-turn mode (< 10 µm resolution) • a narrowband mode with high resolution (~ 100 nm range) CLIC08 Workshop

  5. The ATF Damping Ring tbunch 1 2 19 20 111 112 129 130 221 222 239 240 1 2 trev CLIC08 Workshop

  6. The ATF Damping Ring CLIC08 Workshop

  7. Overview of the BPM Upgrade • New read-out hard-, firm- and software, BPM pickups (button-style) stay unchanged. • Mixed analog/digital signal processing, based on spare Echotek digital receiver boards (pragmatic, cost efficient R&D approach): • Still modern, but not of latest technology digital downconverters (DDC) • Long term experience at Fermilab (p/pbar), spare units available for a cost effective proof of priniple. • BPM system components: • 714-to-15.1 MHz analog downmixer (SLAC), with high dynamic range (located in the tunnel), plus remote-control & calibration prototype unit (Fermilab) • VME hard- & software: • 8-ch. Echotek digital receiver (105 Ms/s, 14-bit ADC, 4 ch. Graychip DDC) • VME timing generator (Fermilab). • Motorola 5500 VME controller, running VxWorks & EPICS software CLIC08 Workshop

  8. BPM Hardware Overview 4 button BPM pickup Down Mix Cal & Ctrl CTRL 4 4 ATT BPF LPF PLL Cal (~ 714) CAN LO (729) IF (15) beam CLK (64.9) beam position I Digital Receiver Echotek VME µP Motorola 5500 Timing TRG Q 714 INJ LAN 2.16 VME BUS CLIC08 Workshop

  9. Button-style BPM Pickup Button: transfer impedance CLIC08 Workshop

  10. Beam Position Signal Processing Down Mix A “Echotek” digital signal processing: LPF BPF up B A Down Mix B LPF BPF out in Down Mix C 1D polynomial fit: LPF C BPF D down Down Mix D 0.1 dB gain error ≡ 27 µm offset error ! LPF BPF CLIC08 Workshop

  11. Analog Signal Processing SSB Mixer • 4-ch. Analog downmixer • Selective inputs (BPF: 714±5 MHz, ~100 ns ring-time) • Gain switchable, low-noise, high IP3 input gain stage • Image rejection (SSB) mixer • 15.1 MHz high gain, ultralinear IF stage ATT BPF LNA LNA LPF LPF 00 IN 714 MHz OUT 15.145 MHz 900 CF: 714 MHz BW: 10 MHz BW: 145 MHz BW: 30 MHz G: 30 dB NF: 2.7 dB G: 14/-2 dB NF: 1 dB 0…28 dB 4 dB steps 1.6 dB loss LO 729.145 MHz CLIC08 Workshop

  12. Digital Signal Processing • Echotek digital receiver • 8-ch VME64x module • Analog Devices 14-bit 105 MS/s AD6645 • Each ADC channel:Texas Instruments 4-ch GC4016 “Graychip” digital downconverter • 128 kWord FIFO CLIC08 Workshop

  13. Digital Signal Processing (cont.) • Wideband TBT mode (BW ~ 1 MHz) • 5 stage CIC: decimate by 4 • CFIR: 7-tap boxcar, decimate by 2 • PFIR 1-tap, no decimation • Narrowband mode (BW ~ 1 kHz),tdec = 158.7 µs, 1280 pt (~200 ms) • 5 stage CIC: decimate by 2746 • CFIR: 21-tap RRC, decimate by 2 • PFIR: 63-tap RRC, decimate by 2 • Graychip digital downconverter • 4 independent channels per ADC • NCO set to fIF = 15.145 MHz(downconvert to DC baseband) • ADC clock set to 32 samples per revoltion: fCLK = 32 x frev = 69.2 MHz • Decimation and filtering for wide- and narrowband mode using CIC and FIR digital filters • Simultaneous DDC operation of beam and calibration signals! WB CIC response WB FIR response WB mode magnitude response CLIC08 Workshop

  14. Other Hardware • VME Timing module: • fCLK = fRF*32/330 = 69.236 MHz clock signals (4x) • trev = 462.2 ns turn marker signals (4x), 0…115 double-buckets (2.8 ns) delayable • To fRF phase-locked fLO = 729.145 MHz • Auxiliary frev and fIF signals • Motorola 5500 VME CPU: • Data collection and normalization • Box-car post-processing filter (20 ms) • Local diagnostic and control software • EPICS control interface • Calibration & remote control unit (prototype): • To fRF phase-locked fCAL ≈ 714 MHz (Analog Devices ADF4153) • In-passband, through button-BPM, or reflected signal calibration • 2nd and 3rdGraychip channels for CAL signal downconversion • CAN-bus remote control functions (attenuation, temperature, etc.) CLIC08 Workshop

  15. Downconverter & CAL Proto • Mini VME crate accommodating: • Motorola 5500 CPU • PMC CAN bus interface ECAN-2 • Timing module TGF • Echotek digital receiver module • BPM #54 prototype installation (temporary): • CAN bus remote control & CAL signal PLL unit (Fermilab) • 4 ch. Downconverter unit (SLAC) CLIC08 Workshop

  16. Calibration Schema • 2 calibration tones: • 714 + ε MHz • 714 – ε MHz • In passband of the downconverter • Coupled through the button BPM • Alternative: Reflected CAL signal • On-line calibration • In presents of beam signals • Available only in narrowband mode • Using separate Graychipchannels CLIC08 Workshop

  17. Calibration Details • Calibration tone frequencies: • fCALx = 713.6 MHz • fCALy = 714.4 MHz • Calibration procedure: • Correction values: • Corrected beam positions: CLIC08 Workshop

  18. CAL System Test 1dB 1dB 3dB 3dB • Calibration on, datalogger on • Comparing uncorrected, corrected (coupled-through), and corrected (reflected) • Introduce large 3 & 1 dB gain errors. • Automatic correction compensates the gain error almost completely!! • Corrected beam position shows a slight increase of the RMS error (to be further studies!). CLIC08 Workshop

  19. Software Components VME Hardware Motorola 5500 µP Software (VxWorks) Control Control Class ATFBPMCAL Control VME ECAN-2 PMC (1x) Class CALBox Status Status CAN Status Sample Flash WB / NB Bucket Delay 714 Single/Multi-turn VME Timing K-TGF (1x) Turn Data INJ (BIS) Ethernet Class KTGF Control Diag. Mode EPICS IOC Sample Count 2.16 Bucket Delay Class ATFBPM 729 Turn Delay Interrupt CLK (64.9) TRG (Gate) Multi-turn A DDC Configure Control VME Echotek (12x) Orbit B Class ADC Pos/ Int Data I/Q Data Flash C Diagnostic D Interrupt CLIC08 Workshop

  20. EPICS Data Acquisition CLIC08 Workshop

  21. Scrubbing Mode, Intensities070518 Normalized Intensities CLIC08 Workshop

  22. Scrubbing Mode, Positions070518 ± 700 um ± 25 um ± 700 um ± 15 um CLIC08 Workshop

  23. Wideband, TBT Mode Beam Tests • Several “issues” had to be resolved: • CIC & FIR digital filter impulse responses to resolve true turn-by-turn data (no “smearing”) • Timing issues, e.g. channel-to-channel, as well as between BPMs and “houses” (VME crates); and of course the usual “seam” problem. • In particular for the kicked beam TBT response tests: • Vertical beta at pinger is 0.5 m (12 times smaller than the horizontal one): we had to resort to injection oscillations -> lower resolution. CLIC08 Workshop

  24. Kicked Beam Tests (May 2007) • Turn-by-Turn data BPM #36 (pinger: On) • Identifying hor. and vert. tune lines (387 kHz, 1.212 MHz). • Observed short time, broadband TBT resolution: few µm! • Observation of “fake” harmonics at n x 10 kHz (not fs), due to power supply EMI in the analog downconverter unit! n x 10 kHz “fake” harmonics hor. tune vert. tune CLIC08 Workshop

  25. TBT Fourier Analysis • TBT data at the jth BPM following a single kick in the z-plane (z ≡ x, y): • with turn number , constant of motion (periodic phase function) • Twiss functions: Fourier component of zj • Amplitude fit: CLIC08 Workshop

  26. Comp.: Measurements vs. Model • MAD8 model (M. Woodley, marginal differences wrt. Kuroda SAD model). • Nearby quadrupole trim coil scan (May 2008). • TBT Fourier analysis, amplitude by fit to beta measured through trim coil scan (April 2008). CLIC08 Workshop

  27. Narrowband Mode Resolution • Triggered at turn #500,000 • ~200 ms position data per shot (1280 narrowband mode BPM measurements). • 126 tap box car filter to reject 50 Hz: • ~ 800 nm resolution • SVD analysis, removing modes with hor./ vert. correlation: • ~200 nm resolution CLIC08 Workshop

  28. NB Mode Resolution Limit Theoretical: • ADC SNR: 75 dB • Process gain: 40.4 dB • NF 1st gain stage: ~ 1 dB • CAL tone level: -10 dBm • Splitter attenuation: 6 dB • Effective gain: ~ 100 dB • BPM sensitivity: 240 µm/dB • Calculated equivalent resolution: ~ 20 nm CAL tone resolution measurement on BPM #56: ~30 nm(!) equiv. resolution(no beam operation at ATF!, magnets off) CLIC08 Workshop

  29. Conclusions • A DR BPM read-out system with high resolution in TBT (few µm), and narrowband mode (<200 nm) has been implemented. • An automatic calibration system for gain drift correction was tested. It operates in presence of the beam signal! • Systematic long term studies using the automatic gain correction system need to be accomplished. • Recent soft-/firmware activities & beam studies at ATF could be realized through remote operation! • TBT kicked beam response studies uncovered discrepancies between theoretical and measured ATF DR optics. • A revised analog/calibration electronics is under development. Problems and limitations on the existing setup will be addressed. • 20-out-of 96 ATF DR BPMs have been upgraded, more will follow in FY09/10 (limited by available M&S funds). CLIC08 Workshop

More Related