1 / 8

Dr. C. L. Jones Biosystems and Ag. Engineering

Aero/Hydrodynamic Properties. Air and water are used to remove foreign material from products How much air required depends on the drag force F D ( sum of skin friction and pressure drag) F D affected by density, abs. viscosity, area and velocity (equation 10.1) Reference Figure 10.1.

nysa
Download Presentation

Dr. C. L. Jones Biosystems and Ag. Engineering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Aero/Hydrodynamic Properties • Air and water are used to remove foreign material from products • How much air required depends on the drag force FD ( sum of skin friction and pressure drag) • FD affected by density, abs. viscosity, area and velocity (equation 10.1) • Reference Figure 10.1 Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

  2. Figure 10.1 BAE 2023 Physical Properties

  3. Aero/Hydrodynamic Properties • FD depends on the drag coefficient CD which is quantified using the Reynolds number. • NRe = Vdpρf/η Where: • V = fluid velocity • dp = particle dimension • ρf= fluid density • η = absolute viscosity • NRe<1.0, Stokes flow, FD=3πdpμV (sphere) • NRe<1,000 Laminar flow • NRe >20,000 Turbulent flow Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

  4. Aero/Hydrodynamic Properties • Terminal velocity: occurs when drag force balances gravitational force • See Table 10.1 • For a sphere • Fdrag=CD(πd2/4)(ρfv2/2) • CD depends on the Reynold number of the particle: Rep= ρfvd/μ (restated from eqt. 10.1 in different terms) • If Rep<0.2, CD=24/Rep • If Rep>200,000, CD=0.44 • If Repis between 500 and 200,000, • CD=(24/Rep)(1.0 + 0.15(Rep)0.687) Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

  5. Lecture 17 – Aero/Hydrodynamic Properties (Ch. 10) Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

  6. Aero/Hydrodynamic Properties Read Example Problem 10.1. You will need to be familiar with it. This examples shows how to find a Reynolds number for a particle, the drag coefficient and the terminal velocity Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

  7. Aero/Hydrodynamic Properties Application example: Can corn stalks be separated from corn cobs pneumatically? What minimum air velocity can be used? How well will it be separated? How could we improve the separation? Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

  8. Aero/Hydrodynamic Properties Application example: A seed company would like to move soybeans through a pipe (5.25” inside diameter) pneumatically. What capacity should the air source (the fan) be rated for? Dr. C. L. Jones Biosystems and Ag. Engineering BAE 2023 Physical Properties

More Related