1 / 5

Chapter 16 Drawing Elevations

Chapter 16 Drawing Elevations. Multiview projection. Also called orthographic projection. Six views in a multiview drawing. Front elevation. Rear elevation. Left elevation. Right elevation. Roof plan / Top. Bottom view/ basement.

nstarr
Download Presentation

Chapter 16 Drawing Elevations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 16 Drawing Elevations • Multiview projection • Also called orthographic projection • Six views in a multiview drawing • Front elevation • Rear elevation • Left elevation • Right elevation • Roof plan / Top • Bottom view/ basement

  2. Exterior elevations are always drawn to the same scale as the floor plan • A dashed line is used to draw major features below the ground line on an exterior elevation • Presentation Drawing • Elevation drawing to which landscape and material textures have been added • Profile Drawing • Term used to describe the elevation drawing of a site

  3. Auxiliary elevation • Drawn when a wall is not at a 90 degree angle on a floor plan • Span • Term used to describe the distance between roof supports • Run • 12 is assigned to the run when calculating roof pitch • Angle of a roof described as a ratio • Double the run to find the span • Interior Elevation • Drawing of an inside wall

  4. Windows and doors • Point of a dashed line represents the part of the window that has the hinge • Numbers or letters are the key to a window or door on a window or door schedule • Should appear on all elevations • Sill • Sash • Mullions • Muntins

  5. Dimensioning • Datum line remains constant on an elevation drawing • Vertical dimensioning should read from right side of a drawing

More Related