1 / 10

18 Bit ADC Status

18 Bit ADC Status. Collaboration meeting May 18, 2007. Early Tests (mostly by Luis). Pedestal Noise good Channels are isolated No apparent crosstalk More later Differential Non-Linearity OK Gave a smooth response to a time varying input. DAC noise works

Download Presentation

18 Bit ADC Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 18 Bit ADC Status Collaboration meetingMay 18, 2007

  2. Early Tests (mostly by Luis) • Pedestal Noise good • Channels are isolated • No apparent crosstalk • More later • Differential Non-Linearity OK • Gave a smooth response to a time varying input

  3. DAC noise works • Multiple sampling of base and peak reduce noise • Causes other issues • Still have negative pedestals • A full report will be written

  4. Lead Run • We didn’t know how to use ADC with timing board • Used internal timing but had a mistake

  5. Error: we were integrating over the HV transition • Led to a pair ordered asymmetry • Problem was resolved but never received low background data.

  6. External timing • Working on getting the busy logic right • Oversample=0 (one sample per cycle): • Integrated value proportional to window

  7. Busy time proportional to sum of ramp delay and window • CODA working for oversample=0 and timing board

  8. Oversampling • Busy Logic working • 256 word readout limit • Becomes an issue when doing many oversample and multiple samples • Not really a problem because we don’t have to flush out ALL data • Means we have to assume that ADC is working correctly for this data (which it is for few oversamples) • Tested in Stand-alone code, presently incorporating into CODA

  9. Future • Prof. Wilson: Separate the regulators between ADC channels, will be done on the next board • Ensures no crosstalk • Voltage mode • Nearly infinite impedance • Current mode • Works best as current through a resistor

  10. Pedestals • The pedestals are negative, but can and will be adjusted • Next week will be receiving a prototype board with a resistance pots which will be adjusted on a channel by channel basis so that pedestals are small and positive • In Future Pedestals will be adjusted by a DAC • Next Board available in August

More Related