1 / 57

Chapter 7 Advanced Part Modeling Techniques

Chapter 7 Advanced Part Modeling Techniques. Chapter 7 - Objectives. After completing this chapter, you will be able to perform the following: Create ribs, webs, and rib networks Emboss text and profiles Create sweep features Create coil features Create loft features

normab
Download Presentation

Chapter 7 Advanced Part Modeling Techniques

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 7Advanced Part Modeling Techniques

  2. Chapter 7 - Objectives • After completing this chapter, you will be able to perform the following: • Create ribs, webs, and rib networks • Emboss text and profiles • Create sweep features • Create coil features • Create loft features • Split a part or split faces of a part • Bend a part

  3. Chapter 7 - Objectives • After completing this chapter, you will be able to perform the following: • Reorder part features • Mirror model features • Suppress features of a part • Create a derived part based on another part or an assembly • Shrinkwrap an assembly • Create plastic and cast features

  4. Rib and Web Features • Rib and Web Features • Used to reinforce or strengthen features • Additional support and minimal weight are required • mold and cast parts • Ribs, webs, and rib networks • Single, open, unconsumed profile • Taper

  5. Rib and Web Features • Rib and Web Features • Rib dialog box • Shape • Profile • Direction • Thickness • Edit Box • Flip Buttons • Extents • To Next • Finite • Extend Profile • Extend Profile • Taper

  6. Rib and Web Features • Creating Rib and Web • Rib Networks • Use multiple intersecting or nonintersecting sketch objects • Thickness is applied to all objects • Rib Network as a • Profile • Ribs • Webs

  7. Exercise 7-1 • Creating Ribs and Webs

  8. Emboss Text and Closed Profiles • Emboss Text / Closed profile • Embossed (raised) • Engraved (cut) • Shape or Text • Geometry Text • On a plane or a curved face • Step 1 - Creating Text • Step 2 - Emboss Text

  9. Exercise 7-2 • Creating Text and Emboss Features

  10. Sweep Features • Sweep Features • Requires two unconsumed sketches • Sweep dialog box • Profile • Path • Operation buttons • Solid / Surface • Taper • Type • Orientation

  11. Sweep Features • Profile • Path • Orientation • Path • Profile

  12. Sweep Features • Type - Path & Guide Rail • Profile Scaling • X & Y • X • None

  13. Sweep Features • Type - Path & Guide Surface • Path • Profile • Guide Surface

  14. Exercise 7-3 • Creating Sweep Features

  15. 3D Sketching • Defining a 3D path • Lip or routing • Work points • Model edges/vertices • 3D Sketch Environment • 2D & 3D curves

  16. Sweep Features • 3D Sketching • 3D Path From Existing Geometry • Define path • Use existing edges • Include Existing Geometry • Projecting part edges, vertices, and geometry

  17. 3D Sketching • 3D Sketch From Intersection Geometry • Defined by a combination • Planar or nonplanar part face • Surface face or quilt • Objects • Work plane

  18. 3D Sketching • Project to Surface • Project Along Vector • Project to Closest Point • Wrap to Surface • Break Link

  19. 3D Sketching • Constructed Paths • Connecting • Work points • 3D line • Auto-Bend • Radius

  20. Sweep Features • 3D Sketching • Work Points • Grounded Work Points • Constraints • 3D Lines and Splines • Precise Input

  21. Exercise 7-4 • 3D Sketch – Sweep Features

  22. Coil Features • Coil Features - Helical, springs or coil shapes • Coil Shape • Profile • Axis • Flip • Rotation • Operation • Coil Size • Type • Pitch • Revolution • Height • Taper

  23. Coil Features • Coil Features • Coil Ends • Start • End • Transition Angle • Flat Angle • Using base & secondary feature

  24. Loft Features • Loft Features • Blends a shape between two or more sections • Area Loft • Complex shapes • Plastic or molded parts • Sections • Rails • Center Line • Points • Curves

  25. Loft Features • Curves • Sections • Rails • Center Line • Output • Operation • Closed Loop • Merge tangent Faces • Area

  26. Loft Features • Conditions • Condition Boundaries Sketches • Free Condition • Direction Condition • Condition Boundaries Face Loop • Smooth (G2) Condition • Angle • Weight

  27. Loft Features • Loft Features • Transition • Point Set • Map Point • Position

  28. Exercise 7-5 • Creating Loft Features

  29. Multi-Body Parts • Create a solid body in a part file • Derive a solid body into a part file • Split Part into solid bodies

  30. Multi-Body Parts • Edit solid bodies • Move bodies • Combine

  31. Multi-Body Parts • Export solid body • Make Part • Make Components

  32. Split a Solid, Part or Face • Part Split and Face Split • Method • Split Face • Trim Solid • Remove Material • Split Solid • Split dialog box • Split Tool • Faces • All • Select

  33. Exercise 7-6 • Splitting a Part into Multiple Bodies

  34. Bend Part • Bend a part • A bend line • Radius + Angle • Radius + Arc Length • Arc Length = Angle

  35. Mirroring Features • Mirroring Features • Features • Dependent on the parent feature • Mirror Plane • Creation Method • Change or update • Mirror Entire Solid

  36. Suppressing Features • Suppressing Features • Temporarily turn off display • Simplify parts • Increases system performance • Unsuppress • Parent – child relationships

  37. Conditionally Suppress Features • Feature Properties • Parameter Value – If statement

  38. Reordering Features • Reordering Features • Browser • Drag horizontal line

  39. Feature Rollback • Feature Rollback • Roll back the design to an earlier state • Then place new features • Reorder • Delete all features below EOP

  40. Derived Parts • In a Part (IPT) file • Options • Body • Work Surface • Sketches • 3D Sketches • Work geometry • Surfaces • Exported Parameters • iMates • Options • Operations • Mixed • Plus • Exclude • Scale Factor • Mirror Part

  41. Derived Assemblies • In a Part (IPT) file • Operations • Combination • Plus • Exclude • Minus • Bounding Box • Keeps seems between planar faces • Reduced Memory Mode • Update • Break Link

  42. Exercise 7-7 • Creating a Derived Part

  43. Shrinkwrap • Reduce detail • Protect intellectual property • Reduce file size • Create a substitute part for use with alternative representations • Create simplified data for complex purchased assemblies

  44. Shrinkwrap • Remove detail by setting • Visibility • By Size • Holes patching • Object type

  45. Exercise 7-8 • Shrinkwrap

  46. Plastic and Cast Part Features • Silhouette Curves—Parting Line • Create a curve at the outermost boundary of the selected faces • Select a direction • Then create a surface that will be used as a split tool

  47. Plastic and Cast Part Features • Grills • Create a grill feature from a simple sketch • Create a sketch • Create feature - fill in information in dialog box

  48. Plastic and Cast Part Features • Bosses • Creates a boss feature to hold a fastener • Place sketch point(s) or work point(s) • Create feature - fill in information in dialog box

  49. Plastic and Cast Part Features • Rests • Create flat area the goes partially inside and outside a part • Create a sketch • Create feature - fill in information in dialog box

  50. Plastic and Cast Part Features • Snap Fit • Creates a mechanism that is used to hold two parts together • Place sketch point(s) or work point(s) • Create feature - fill in information in dialog box

More Related