1 / 30

EE207: Digital Systems I, Semester I 2003/2004

EE207: Digital Systems I, Semester I 2003/2004. CHAPTER 6-i: Programmable Logic Devices (PLDs). Overview. Three-State Buffers Programmable Logic Technologies Read-Only Memory (ROM) Programmable Logic Arrays (PLAs) Programmable Array Logic (PAL). Three-State Buffers.

noral
Download Presentation

EE207: Digital Systems I, Semester I 2003/2004

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EE207: Digital Systems I, Semester I 2003/2004 CHAPTER 6-i: Programmable Logic Devices (PLDs)

  2. Overview • Three-State Buffers • Programmable Logic Technologies • Read-Only Memory (ROM) • Programmable Logic Arrays (PLAs) • Programmable Array Logic (PAL) Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  3. Three-State Buffers • Buffer output has 3 states: 0, 1, Z • Z stands for High-Impedance  Open circuit EN = 0  out = Z (open circuit) EN = 1  out = in (regular buffer) EN out in Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  4. Three-state buffer(BUF)/inverter(INV) symbols EN EN out out in in 3-state BUF, EN high 3-state INV, EN high EN EN out out in in 3-state BUF, EN low 3-state INV, EN low Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  5. Multiplexed output lines using three-state buffers • Assume an output line that can receive data from either a system (circuit) A or a system B. A If A = B  out = A = B If A  B  a large enough current can be created, that causes excessive heating and could damage the circuit. out B wiredlogic Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  6. ENA A out ENB B S A 0 out B 1 S Multiplexed output lines using three-state buffers (cont.) • Solution: A B Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  7. Programmable Logic Devices (PLDs) • Standard logic devices that can be programmed to implement any combinational logic circuit. • Standard  of regular structure • Programmed  refers to a hardware process used to specify the logic that a PLD implements Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  8. Gate Symbols . . . . . . Conventional AND gate symbol Array Logic OR gate symbol One major difference! a b c F = 0 a F b c F = a.c F = a.b.c Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  9. Read-Only Memory (ROM) • Stores binary information permanently • Non-Volatile (info is kept even when power is turned off) k inputs = specify the # of addresses available n outputs = specify the size of data ROM 2k x n m k Block Diagram Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  10. Read-Only Memory (cont.) Address 8x4 ROM • Example: k=3, n=4 • There are 23=8 available addresses • 4-bits are stored in each address 3 4 Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  11. ROM construction: Example of an 25x8 ROM • Use a 5-to-32 decoder to generate the 32 addresses. • Use 8 OR gates, each can be programmed to be driven by any of the decoder outputs. Programmable logic. # of interconnectionsis 25x8 Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  12. Programming the ROM, i.e. load desired data at specified addresses Address (in decimal) 0 1 2 3 28 29 30 31 ROM addresses ROM data Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  13. Programming the ROM (cont.) Example: Let I0I1I3I4 = 00010 (address 2). Then, output 2 of the decoder will be 1, the remaining outputs will be 0, and ROM output becomes A7A6A5A4A3A2A1A0 = 11000101. Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  14. ROM-based circuit implementation • Given a 2kxn ROM, we can implement ANY combinational circuit with at most k inputs and at most n outputs. • Why? • k-to-2k decoder will generate all 2k possible minterms • Each of the OR gates must implement a m() • Each m() can be programmed Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  15. Example • Find a ROM-based circuit implementation for: • f(a,b,c) = a’b’ + abc • g(a,b,c) = a’b’c’ + ab + bc • h(a,b,c) = a’b’ + c • Solution: • Express f(), g(), and h() in m()format (use truth tables) • Program the ROM based on the 3 m()’s Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  16. Example (cont.) • There are 3 inputs and 3 outputs, thus we need a 8x3 ROM block. • f = m(0, 1, 7) • g = m(0, 3, 6, 7) • h = m(0, 1, 3, 5, 7) a 0 1 2 3 4 5 6 7 3-to-8decoder b c g f h Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  17. Programmable Logic Arrays (PLAs) • Similar concept as in ROM, except that a PLA does not necessarily generate all possible minterms (ie. the decoder is not used). • More precisely, in PLAs both the AND and OR arrays can be programmed (in ROM, the AND array is fixed – the decoder – and only the OR array can be programmed). Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  18. OR array AND array PLA Example • f(a,b,c) = a’b’ + abc • g(a,b,c) = a’b’c’ + ab + bc • h(a,b,c) = c • PLAs can be more compact • implementations than ROMs, • since they can benefit from • minimizing the number • of products required to • implement a function Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  19. Another PLA Example • Find a PLA-based circuit implementation for: • F1(A,B,C) = AB’ + AC + A’BC’ • F2(A,B,C) = (AC + BC)’ • Solution: • 3 inputs, 2 outputs ( 2 OR gates) • 4 distinct product terms (4 AND gates) • Use XOR array to find complements Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  20. PLA Example (cont.) XOR array F1 F2’ Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  21. PLA Example (cont.) Tabular Form Specification of interconnection programming F1 = AB’+AC+A’BC’ F2 = AC+BC Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  22. Determining the size of a PLA • Given: • n inputs • p product terms • m outputs • PLA size is: • Gates: n INV (and maybe n BUF) + p ANDs + m ORs + m XORs • Programmable interconnections: 2np + pm + 2m Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  23. Programmable Array Logic (PAL) • OR plane (array) is fixed, AND plane can be programmed • Less flexible than PLA • # of product terms available per function (OR outputs) is limited Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  24. inputs 1st output section Only functions with at most four products can be implemented 2nd output section 3rd output section 4th output section PAL Example Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  25. PAL-based circuit implementation W = ABC + CD X = ABC + ACD + ACD + BCD Y = ACD + ACD + ABD Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  26. Can we implement more complex functions using PALs? • Yes, by allowing output lines to also serve as input lines in the AND plane. Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  27. Example • Implement the combinational circuit described by the following equations, using a PAL with 4 inputs, 4 outputs, and 3-wide AND-OR structure. • W(A,B,C,D) = m(2,12,13) • X(A,B,C,D) = m(7,8,9,10,11,12,13,14,15) • Y(A,B,C,D) = m(0,2,3,4,5,6,7,8,10,11,15) • Z(A,B,C,D) = m(1,2,8,12,13) Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  28. Example (cont.) • Use function simplification techniques to derive: • W = ABC’+A’B’CD’ • X = A+BCD • Y=A’B+CD+B’D’ • Z=ABC’+A’B’CD’+AC’D’+A’B’C’D = W + AC’D’+A’B’C’D Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  29. Example (cont.) Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

  30. Example (cont.) Tabular Form Specification of interconnection programming Chapter 6-i: Programmable Logic Devices (6.5 -- 6-8)

More Related