1 / 43

Inequality: Empirical Issues

Inequality: Empirical Issues. Inequality and Poverty Measurement Technical University of Lisbon Frank Cowell http://darp.lse.ac.uk/lisbon2006. July 2006. Introduction. Focus on an issue common to most empirical applications in distributional analysis Sensitivity to extreme values

noe
Download Presentation

Inequality: Empirical Issues

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Inequality: Empirical Issues Inequality and Poverty Measurement Technical University of Lisbon Frank Cowell http://darp.lse.ac.uk/lisbon2006 July 2006

  2. Introduction • Focus on an issue common to most empirical applications in distributional analysis • Sensitivity to extreme values • Should be able to estimate inequality and other indices by using sample data. • But, how do very low / very high observations affect estimates? • References found in • Cowell, F. A. and Flachaire, E. (2002) "Sensitivity of Inequality Measures to Extreme Values" Distributional Analysis Discussion Paper, 60, STICERD, LSE, Houghton St., London, WC2A 2AE.” • Motivation • Interested in sensitivity to extreme values for a number of reasons • Welfare properties of income distribution • Robustness in estimation • Intrinsic interest in the very rich, the very poor.

  3. Sensitivity? • How to define a “sensitive” inequality measure? • Ad hoc discussion of individual measures • empirical performance on actual data (Braulke 83). • not satisfactory for characterising general properties • Welfare-theoretical approaches • focuses on transfer sensitivity (Shorrocks-Foster 1987) • But does not provide a guide to the way measures may respond to extreme values. • Need a general and empirically applicable tool.

  4. Preliminaries • A large class of inequality measures: • Define two moments: • Can be written as:

  5. The Influence Function • Mixture distribution: • Influence function: • For the class of inequality measures: • which yields:

  6. Some Standard Measures • GE: • Theil: • MLD: • Atkinson: • Log var:

  7. …and their IFs • GE: • Theil: • MLD: • Atkinson: • Log var:

  8. Special case • The Gini coeff: • The IF: • where:

  9. z  0 z   GE a > 1 - za 0 < a  1 - z a = 0 log z z a < 0 za z Log Var [log z] 2 z Gini - z Tail behaviour

  10. Implications • Generalised Entropy measures with  > 1 are very sensitive to high incomes in the data. • GE ( < 0) are very sensitive to low incomes • We can’t compare the speed of increase of the IF for different values of 0 <  < 1 • If we don’t know the income distribution, we can’t compare the IFs of different class of measures. • So, let’s take a standard model…

  11. Singh-Maddala c = 1.7 c = 1.2 c = 0.7

  12. Using S-M to get the IFs Good model of income distribution of German households • Use these to get true values of inequality measures. • Obtained from the moments: • Take parameter values a=100, b=2.8, c=1.7 • Normalise the IFs • Use relative influence function

  13. IFs based on S-M Gini Gini Gini Gini

  14. IF using S-M: conclusions • When z increases, IF increases faster with high values of a. • When z tends to 0, IF increases faster with small values of a. • IF of Gini index increases slower than others but is larger for moderate values of z. • Comparison of the Gini index with GE or Log Variance does not lead to clear conclusions.

  15. A simulation approach • Use a simulation study to evaluate the impact of a contamination in extreme observations. • Simulate 100 samples of 200 observations from S-M distribution. • Contaminate just one randomly chosen observation by multiplying it by 10. • Contaminate just one randomly chosen observation by dividing it by 10. • Compute the quantity Contaminated Distribution Empirical Distribution

  16. Contamination in high values RC(I) 100 different samples sorted such that Gini realisations are increasing. • Gini is less affected by contamination than GE. • Impact on Log Var and GE (0<a1 is relatively small compared to GE (a<0) or GE (a>1) • GE (0a1) is less sensitive ifais smaller • Log Var is slightly more sensitive than Gini

  17. Contamination in low values RC(I) 100 different samples sorted such that Gini realisations are increasing. • Gini is less affected by contamination than GE. • Impact on Log Var and GE (0<a1 is relatively small compared to GE (a<0) or GE (a>1) • GE (0a1) is less sensitive ifais larger • Log Var is more sensitive than Gini

  18. Influential Observations • Drop the ithobservation from the sample • Call the resulting inequality estimate Î(i) • Compare I(F) with Î(i) • Use the statistic • Take sorted sample of 5000 • Examine 10 from bottom, middle and top

  19. Influential observations: summary • Observations in the middle of the sorted sample don’t affect estimates compared to smallest or highest observations. • Highest values are more influential than smallest values. • Highest value is very influential for GE (a = 2) • Its estimate should be modified by nearly 0.018 if we remove it. • GE (a = –1) strongly influenced by the smallest observation.

  20. Extreme values • An extreme value is not necessarily an error or some sort of contamination • Could be an observation belonging to the true distribution • Could convey important information. • Observation is extreme in the sense that its influence on the inequality measure estimate is important. • Call this a high-leverage observation.

  21. High-leverage observations • The term leaves open the question of whether such observations “belong” to the distribution • But they can have important consequences on the statistical performance of the measure. • Can use this performance to characterise the properties of inequality measures under certain conditions. • Focus on the Error in Rejection Probability as a criterion.

  22. Davidson-Flachaire (1) • Even in very large samples the ERP of an asymptotic or bootstrap test based on the Theil index, can be significant • Tests are therefore not reliable. • Three main possible causes : • Nonlinearity • Noise • Nature of the tails.

  23. Davidson-Flachaire (2) • Three main possible causes : • Indices are nonlinear functions of sample moments. Induces biases and non-normality in estimates. • Estimates of the covariances of the sample moments used to construct indices are often noisy. • Indices often sensitive to the exact nature of the tails. A bootstrap sample with nothing resampled from the tail can have properties different from those of the population. • Simulation experiments show that case 3 is often quantitatively the most important. • Statistical performance should be better with MLD and GE (0 < a < 1 ), than with Theil.

  24. Empirical methods Empirical Distribution • The empirical distribution Indicator function • Empirical moments • Inequality estimate

  25. Testing • Variance estimate • For given value I0 test • Test statistic

  26. Bootstrap • To construct bootstrap test, resample from the original data. • Bootstrap inference should be superior • For bootstrap sample j, j = 1,…,B, a bootstrap statistic W*j is computed almost as W from the original data • But I0 in the numerator is replaced by the index Î estimated from the original data. • Then the bootstrap P-value is

  27. Error in Rejection Probability: A • ERPs of asymptotic tests at the nominal level 0.05 • Difference between the actual and nominal probabilities of rejection • Example: • N = 2 000 observations • ERP of GE (a =2) is 0.11 • Asymptotic test over-rejects the null hypothesis • The actual level is 16%, when the nominal level is 5%.

  28. Error in Rejection Probability: B • ERPs of bootstrap tests. • Distortions are reduced for all measures • But ERP of GE (a = 2) is still very large even in large samples • ERPs of GE (a = 0.5, –1) is small only for large samples. • GE (a=0) (MLD) performs better than others. ERP is small for 500 or more observations.

  29. a N=50,000 N=100,000 2 0.0492 0.0415 1 0.0096 0.0096 0.5 0.0054 0.0052 0 0.0024 0.0043 –1 0.0113 0.0125 More on ERP for GE What would happen in very large samples?

  30. ERP: conclusions • Rate of convergence to zero of ERP of asymptotic tests is very slow. • Same applies to bootstrap • Tests based on GE measures can be unreliable even in large samples.

  31. Sensitivity: a broader perspective • Results so far are for a specific Singh-Maddala distribution. • It is realistic, but – obviously – special. • Consider alternative parameter values • Particular focus on behaviour in the upper tail • Consider alternative distributions • Use other familiar and “realistic” functional forms • Focus on lognormal and Pareto

  32. Alternative distributions • First consider comparative contamination performance for alternative distributions, same inequality index • Use same diagrammatic tool as before • x-axis is the 100 different samples, sorted such inequality realizations are increasing • y-axis is RC(I) for the MLD index

  33. Singh-Maddala • Distribution function: • Inequality found from: c = 0.7 (“heavy” upper tail) c = 1.2 c = 1.7

  34. MLD Contamination S-M

  35. Lognormal • Distribution function: • Inequality: s = 0.5 s = 0.7 s = 1.0 (“heavy” upper tail)

  36. MLD Contamination: Lognormal

  37. Pareto a = 1.5 (“heavy” upper tail) a = 2.0 a = 2.5

  38. MLD Contamination Pareto

  39. ERP at nominal 5%: MLD • Asymptotic tests • Bootstrap tests

  40. ERP at nominal 5%: Theil • Asymptotic tests • Bootstrap tests

  41. Comparing Distributions • Bootstrap tests usually improve numerical performance. • MLD is more sensitive to contamination in high incomes when the underlying distribution upper tail is heavy. • ERP of an asymptotic and bootstrap test based on the MLD or Theil index is more significant when the underlying distribution upper tail is heavy.

  42. Why the Gini…? • Why use the Gini coefficient? • Obvious intuitive appeal • Sometimes suggested that Gini is less prone to the influence of outliers • Less sensitive to contamination in high incomes than GE indices. • But little to choose between… • the Gini coefficient and MLD • Gini and the logarithmic variance

  43. The Bootstrap…? • Does the bootstrap “get you out of trouble”? • bootstrap performs better than asymptotic methods, • but does it perform well enough? • In terms of the ERP, the bootstrap does well only for the Gini, MLD and logarithmic variance. • If we use a distribution with a heavy upper tail bootstrap performs poorly in the case of a = 0 • even in large samples.

More Related