1 / 17

Sorption of Anions

Sorption of Anions. Important because: Several nutrients and agricultural chemicals are negatively charged. Nitrate, phosphate, sulfate, selenate,… Tropical, acidic and highly weathered soils exhibit notable anion sorption.

niveditha
Download Presentation

Sorption of Anions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sorption of Anions Important because: • Several nutrients and agricultural chemicals are negatively charged. • Nitrate, phosphate, sulfate, selenate,… • Tropical, acidic and highly weathered soils exhibit notable anion sorption. • (Particularly in soils rich in variable charged particle surfaces such as Fe, Al, and Mn oxides or allophane)

  2. Mechanisms • Outer-sphere complexation and diffuse ion swarm (pH dependent) S-OH(s) + H+(aq) SOH2+ SOH2+ + A-(aq) SOH2A(s) • Where S is the surface or sorbent • Important for NO3-, Cl-, ClO4-, ~SO4-2, SeO4-2 (selenate) • More prevalent on oxide and silicate edges than humus fraction

  3. Anion Exchange • As pH increases up to the pKa, adsorption increases. • Above the pKa, adsorption decreases. H4SiO4 H+ + H3SiO4- pKa ~ 9.5 HF  H+ + F- pKa ~ 4 • At typical conditions for most soils, anion sorption is inversely related with pH: • AEC increases as soil pH decreases.  • Ion exchange or outer-sphere sorption is greatest in soils dominated by the sesquioxides and allophane

  4. Inner-sphere complexation • ligand exchange (a.k.a. anion penetration or chemisorption) SOH2+ + A- SA(s) + H2O(l) • Important for phosphate, borate, arsenate, arsenite, silicate, selenite, molybdate • O or OH ions on mineral edges can be replaced by anions like phosphate and F- that can enter into sixfold coordination with Al+3 or Fe+3 in octahedra • Borate, B(OH)4-, can bond to humus -

  5. Surface complex structure • Monodentate – metal is bonded to only one oxygen • Bidentate – metal is bonded to two oxygens • Mononuclear – sorbed metal is associated with one metal on sorbent surface • Binuclear – sorbed metal is bonded to two sorbent metals

  6. http://www.geosc.psu.edu/envchem/1.4_files/image002.jpg

  7. http://www.nsls.bnl.gov/newsroom/science/2003/images/01-Peak-figure2.jpghttp://www.nsls.bnl.gov/newsroom/science/2003/images/01-Peak-figure2.jpg

  8. Adsorption envelopes • Plots of anion sorption vs. pH at constant concentration • Show variation in sorption behavior with pH • Important because availability of anions can be managed by managing pH (e.g., liming acid soils, acid rain, etc.) • Also shows competition between anion protonating (removing H+ from solution) and surface protonation

  9. Effect of pH on Cd adsorption onto kaolinite in single- (Cd concentration 133.33 µM) and multi-element (Cd, Cu, Pb and Zn concentration 33.33 µM each i.e. total metal concentration 133.33 µM) systems. http://www.scielo.br/img/fbpe/jbchs/v11n5/a14fig01.gif http://www.regional.org.au/au/asssi/supersoil2004/s3/poster/1578_srivastavap-2.gif

  10. Like       and SO    the MoO    anion is strongly adsorbed by Fe and Al oxides, which markedly increase at low pH. Mo sorption capacity http://www.ilri.org/InfoServ/Webpub/Fulldocs/Bulletin26/Molybde.htm

  11. http://www.freepatentsonline.com/20050156136-0-large.jpg

  12. Point of Zero Charge PZC  pH at which the surface has net charge of zero: p = 0 1. When pH < PZC the particle surface is positively charged 2. When pH > PZC the particle surface is negatively charged 3. At PZC, settling of flocs occurs – important in aggregation and retention of ions during irrigation, leaching, etc.

  13. pH below the pHZPC http://www.gly.uga.edu/schroeder/geol6550/zpcphlow.gif

  14. pH at the pHZPC

  15. pH above the pHZPC

  16. Soil components vary in PZC • Fe and Al oxides (Oxisols, tropical soils) have high PZC (pH 5-9) • Soil organic matter has low PZC (pH<5) • Silicate clays have low PZC (pH 2-5) Interpretation: low PZC = net negative charge over wider soil pH range  more cation adsorption and more CEC High PZC = net positive charge in acid conditions or in lower range of soil pH  more anion adsorption and less CEC 4. Consider the distribution of soil components in the profile – where would you expect to see more or less anion and cation adsorption?

  17. MineralpHZPC Gibbsite 10   Hematite  4.2 - 6.9 Goethite  5.9 - 6.7  Na-feldspar  6.8  Kaolinite  2 - 4.6  Montmorillonite  <2 - 3  Quartz  1 - 3 Note that Al and Fe hydroxides have a high pHZPC Kaolinite and montmorillonite have low pHZPC pH for zero point of charge for minerals

More Related