1 / 16

Open Cell (Upholstery) Foam

Open Cell (Upholstery) Foam. Thicker, less dense than craft foam Soft, compressable Cut using scissors, craft knife, or kitchen knife depending on thickness. Open Cell (Upholstery) Foam. Seal the foam – very difficult to paint directly on upholstery foam White glue not a good option

nibaw
Download Presentation

Open Cell (Upholstery) Foam

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Open Cell (Upholstery) Foam • Thicker, less dense than craft foam • Soft, compressable • Cut using scissors, craft knife, or kitchen knife depending on thickness

  2. Open Cell (Upholstery) Foam • Seal the foam – very difficult to paint directly on upholstery foam • White glue not a good option • “Flexbond” adhesive (multiple layers for a smoother finish) • “Super 77” spray glue for a rougher finish • Also the best option for gluing pieces together • Stays tacky – needs another layer before painting

  3. Open Cell (Upholstery) Foam

  4. Open Cell (Upholstery) Foam

  5. Insulation and Styrofoam • Better for props than worn pieces • “Hard” foam – doesn’t have give like craft or upholstery foams • Easy to carve into shape with a sharp knife • Specialized cutters available

  6. Insulation and Styrofoam • Use cardboard, dowel, or pipe for internal strength • To avoid chipping and scuffs apply paper mache layer to seal the foam before painting • Be very careful when gluing or painting; many spray-on products and adhesives will melt the foam • Always test first – OUTDOORS!

  7. Expanding Foam • Designed to expand to fill cracks • Can be used to build up volume on a prop then carved down into the desired shape

  8. Expanding Foam • Pattern: make a cross-section shape of the prop out of cardboard • Remember to include a dowel for strength if piece is long or delicate • Cover the pattern area with expanding foam and allow to dry (~1 day) • Flip and do the other side • Using the cardboard shape as a guide, carve down the foam with a sharp craft knife • To seal, add a layer of paper mache or similar before painting

  9. Insulation and Expanding Foam

  10. Expanding Foam

  11. Expanding Foam

  12. Expanding Foam

  13. Other ideas… • Crayola “Model Magic”

  14. Other ideas… • Pool noodles and pipe insulation

  15. Other ideas… • Pool noodles and pipe insulation

  16. Thanks…. Photos used courtesy of: • Mai Sheri www.maishericostumes.com • Kudrel kudrel-cosplay.deviantart.com • Featherweight www.featherweightcreations.com • ShuShuWafflez shushuwafflez.deviantart.com • VickyBunnyAngel vickybunnyangel.deviantart.com • Filougon filougon.deviantart.com • Pan PANattheDisco.deviantart.com • Yavarice cosplay.com/member/115091 • Cole cosplay.com/member/8322 Jennifer “Mai Sheri” Wynne 2012 For The Rusty Gear

More Related