1 / 8

Electrically Heated Temperature Device ETD400

Electrically Heated Temperature Device ETD400. Electrically Heated Temperature Device - ETD400. Electrical (resistance) heating Typical working range: ambient – 400°C In connection with LN2 or fluid bath lower temperatures possible Advantages: - Fast heating - Easy to operate

niabi
Download Presentation

Electrically Heated Temperature Device ETD400

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrically Heated Temperature Device ETD400

  2. Electrically Heated Temperature Device - ETD400 • Electrical (resistance) heating • Typical working range: ambient – 400°C • In connection with LN2 or fluid bath lower temperatures possible • Advantages: - Fast heating • - Easy to operate • - Relatively inexpensive • - With appropriate design small • gradients • Disadvantages: - Slow cooling • - For fast cooling additional cooling • medium needed • - Limited sample space for special • accessories like solid torsion bar • fixture etc.

  3. Electrically Heated Temperature Device - ETD400 Electrical (resistance) heating system • Electrically heated bottom plate • Electrically heated hood • From ambient to 400°C • With cooling options from -130°C • Low temperature gradients • Inert gas possible

  4. Electrically Heated Temperature Device - ETD400 • Temperature Cooling: Air: ambient to 400°C Thermostat: -20 to 400°C Low temperature option: -130°C to 400°C (with TC30) -130°C to 250°C (with TC20) • Supply pressure Air: up to 0.5bar Liquid nitrogen: up to 1.2 bar (0.8 to 1.0 recommended) • Consumption rate Liquid nitrogen: 2-5 l/min

  5. Electrically Heated Temperature Device - ETD400 Schematic diagram Water bath US200 Cooling Options Air TC20 / TC30 Low Temp. Option only with TC30

  6. Electrically Heated Temperature Device - ETD400 Principle of operation Measuring plate Pt100 Heating element Safety valve Cooling (in) AirWaterNitrogen gas Cooling (out)

  7. Electrically Heated Temperature Device - ETD400 P-ETD400 – Hose connections Air cooling Water cooling N2-cooling Water bath FMU EVU10

  8. Electrically Heated Temperature Device - ETD400 Fixture for disposable dishes

More Related