1 / 15

Basic Electrical Safety

Basic Electrical Safety. Objectives. Basics of Electricity Conductors and Insulators “Play It Safe, It’s The Law”. Objectives. Not designed to qualify you to work on electrical systems Not designed to be inclusive of all regulations regarding working near electrical lines/facilities

neron
Download Presentation

Basic Electrical Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Basic Electrical Safety

  2. Objectives • Basics of Electricity • Conductors and Insulators • “Play It Safe, It’s The Law”

  3. Objectives • Not designed to qualify you to work on electrical systems • Not designed to be inclusive of all regulations regarding working near electrical lines/facilities • As a reminder, if you identify problems with electrical systems, please report them immediately

  4. Basics • Electricity flows in a completed path or loop • Electricity will not flow until there is a complete loop • Electricity will take the easiest and all paths to ground • Electricity flows through conductors such as metal or water • Because the human body is mostly water, it is a conductor of electricity

  5. Basics • Electricity is measured in different ways • Volts • Amperes (Amps) • Watts • Volts measure the “pressure” under which electricity flows. • Amps measure the amount of electric current. • Watts measure the amount of work done by a certain amount of current at a certain pressure or voltage. • To understand how they are related, think of water in a hose. Turning on the faucet supplies the force, which is like the voltage. The amount of water moving through the hose is like the amperage. You would use lots of water that comes out really hard (like a lot of watts) to wash off a muddy car. You would use less water that comes out more slowly (like less watts) to fill a glass.

  6. Effect on the Human Body • Shock • Burns • Electrocution

  7. Have you ever been shocked? • More than 3 ma painful shock • More than 10 ma muscle contraction “no-let-go” danger • More than 30 ma lung paralysis- usually temporary • More than 50 ma possible ventricular fibrillation (heart dysfunction, usually fatal) • 100 ma to 4 amps certain ventricular fibrillation, fatal • Over 4 amps heart paralysis; severe burns. Usually caused by >600 volts

  8. OSHA and State Plans • The following states have approved State Plans: • Alaska, Arizona, California, Connecticut, Hawaii, Indiana, Iowa, Kentucky, Maryland, Michigan, Minnesota, Nevada, New Jersey, New Mexico, New York, North Carolina, Oregon, Puerto Rico, South Carolina, Tennessee, Utah, Vermont, Virgin Islands, Virginia, Washington, and Wyoming • NOTE: The Connecticut, New Jersey, New York and Virgin Islands plans cover public sector (State & local government) employment only.

  9. The Law • Chapter 752 of the Texas Health & Safety Code makes it unlawful for unauthorized persons to: • move to, or place any objects, within six feet of any high voltage overhead electric line (over 600 volts), or • to operate certain machinery or equipment within six feet of any high voltage overhead electric line • Chapter 752 also requires unauthorized persons to contact the owner of the lines 48 hours before work within these zones is started

  10. Low Voltage Power Lines • Low Voltage is 600 volts or less • Residential structures will be fed by single phase lines from a transformer • Commercial structures will be fed by three phase lines from a transformer • The minimum approach distance for low voltage lines is 3 feet for insulated lines • The minimum approach distance for low voltage lines is 10 fee for uninsultated lines

  11. Know Before You Dig • Electric cables can also be buried underground • Under streets • Under alleys • Buried in residential yards • Call before you dig 1-800-DIG TESS (344-8377)

  12. Items to Consider • Scaffolding • Extension ladders • Metal poles • Trenching machines • Shovels • Tools

  13. Do and Do Not • Doplug power equipment into wall receptacles with power switches in the “Off” position. • Dounplug electrical equipment by grasping the plug and pulling. Do not pull or jerk the cord to unplug the equipment. • Do not drape power cords over hot pipes, radiators or sharp objects. • Docheck the receptacle for missing or damaged parts. • Do not plug equipment into defective receptacles. • Docheck for frayed, cracked, or exposed wiring on equipment cords.

  14. Do and Do Not • Docheck for defective cords clamps at locations where the power cord enters the equipment or the attachment plug. • Do not use extension cords in office areas. • Do not use “cheater” plugs, extension cords with junction box receptacle ends. • Do know the location of electrical circuit breaker panels that control equipment and lighting in their respective areas. Circuits and equipment disconnects must be identified.

  15. Questions? Jeff O’Connor TXU Electric Delivery Safety Coordinator 500 N Akard LP 11041 Dallas, TX 75201

More Related