1 / 19

Chapter 15 - Cycles Gone Wild

Chapter 15 - Cycles Gone Wild. Objectives Be able to explain how bacteria can aid in metal recovery from ore Be able to explain the difference between direct and indirect leaching of metals Understand the three different approaches to bioleaching of metals

nellie
Download Presentation

Chapter 15 - Cycles Gone Wild

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 15 - Cycles Gone Wild • Objectives • Be able to explain how bacteria can aid in metal recovery from ore • Be able to explain the difference between direct and indirect leaching of metals • Understand the three different approaches to bioleaching of metals • Be able to explain how bacteria participate in iron corrosion • Be able to explain how bacteria participate in concrete corrosion • Be able to give an example of metal methylation that is detrimental and one that is beneficial • Be able to describe the major similarities and differences between a soil system and a compost system • Be able to describe how the composting process works

  2. Some Beneficial and Detrimental Aspects of Biogeochemical Cycles • metal recovery • desulfurization of coal • acid mine drainage • metal corrosion • concrete corrosion • nitrous oxide emission (ozone) • nitrate contamination • methylation of metals • composting • bioremediation Can you give other examples?

  3. As a result, autooxidation and microbial oxidation occurs 2FeS2 + 7O2 + 2H2O 2FeSO4 + 2H2SO4 4FeSO4 + 2H2SO4 + O2 2Fe2(SO4)3 + 2H2O Fe2(SO4)3 + 6H2O 2 Fe(OH)3 + 3H2SO4 Sulfur oxidation is an examples of how a part of a cycle can be harnessed for societal benefit – turning a detrimental acitivity into a beneficial one Detrimental activity: acid mine drainage Coal and ore are found in geological formations under reduced conditions Mining activities expose these materials to O2

  4. Beneficial activity – metal recovery Direct Leaching of Metals MS + 2O2 MSO4 (where M is a metal) examples ZnS NiS CoS 2UO22+ + 4H+ 2U4+ + O2 + 4H+ hexa–soluble tetra–insoluble Indirect Leaching of Metals 2FeS + Fe2(SO4)3 + 2H+ 2FeSO4 + H2SO4 spontaneous 2FeSO4 + 1/2O2 + H2SO4 Fe2(SO4)3 + H2O bacterial (a chemoautotrophic process that oxidizes Fe2+)

  5. What types of organisms are useful in metal recovery? 2FeSO4 + 1/2O2 + H2SO4 Fe2(SO4)3 + H2O Acidothiobacillus ferrooxidans chemoautotrophic, uses O2 as electron acceptor Optimal conditions? temp: 30 - 500 C pH: 2.3 - 2.5 O2: required Fe: 2-4 g Fe/L leach liquor Some examples of copper-containing minerals: CuFeS2 + Fe2(SO4)3 CuSO4 + 5FeSO4 + 2S0 chalcopyrite CuS2 + 2Fe2(SO4)3 2CuSO4 + 4FeSO4 + S0 chalcocite CuSO4 + 2FeSO4 + 2S0 CuS + Fe2(SO4)3 covellite 5CuSO4 + 13FeSO4 + 4S0 Cu5FeS4 + 6Fe2(SO4)3 bornite

  6. Approaches to Bioleaching 1. heap leaching 2. reactor leaching 3. in situ leaching 30% Cu and U currently mined using bioleaching In the field, recovery of copper from low-grade ores is between 50-70% Bioleaching is 1/3 to 1/2 the cost of smelting • Heap leaching • Requires building an impermeable pad. The ore is then broken up and heaped onto the pad. Water is pumped onto the top of the heap, the leachate is collected, processed, and recycled back onto the heap.

  7. Continuous bioreactor • The ore is placed into the reactor and water pumped through on a continuously recirculating basis as shown below. Acidothiobacillus

  8. In situ leachingThis is only practical under favorable geological conditions. Wells are drilled, the outer wells are used to apply leach liquor, and the center well is the recovery shaft. Leach liquor shafts Recovery shaft In all cases, the leached metal can be recovered by electrolysis But the majority of metal recovery operations use a solvent or lixivient extraction The lixivient is a kerosene-like material that contains a metal-chelating agent The metal partitions into the lixivient layer and out of the water phase The metal is then recovered from the lixivient

  9. Metal corrosion • It is estimated that 1.6 to 5.0 billion $/yr in damage is due to corrosion of iron pipes. Although this is not solely a microbial process, it is exacerbated by microbial activity. Both iron oxidizing bacteria (aerobic) and sulfate-reducing bacteria (SRBs, anaerobic) participate in these reactions. • Corrosion control • Coat surfaces with bacteriocides • phenolics • quaternary ammonia compounds • metals (copper) • surfactants • Remove surface biofilms • chemical • chlorine • surfactants • mechanical • scraping (pigging)

  10. Iron-oxidizing bacteria Fe2+ + ½O2 + 5H2O 2Fe(OH)3 + 4H+ Aerobic cathodic reaction O2 + 2H2O + 4e- 4OH- Anodic reaction Fe0 Fe2+ + 2e- Sulfate-reducing bacteria 4H2 + SO42- 4H2O + S2- Fe2+ + S2- FeS Anaerobic cathodic reaction 2H+ + 2e- 2H H2 Iron corrosion Metal surface

  11. Concrete corrosion Concrete corrosion at rates of 4.3 to 4.7 mm/yr, causes severe damage and has been well-documented in sewer pipes. The actual corrosion process occurs when sulfuric acid reacts with calcium hydroxide binder in the concrete. Such binding components in concrete as well as ceramics and stone are acid sensitive. Corrosion is a 2-step process that occurs from the inside of the pipe outwards. There are two environments in a sewer pipe, the liquid and the headspace. The action of sulfate-reducing microbes (SRBs) in the liquid generates H2S which is volatile and exchanges into the headspace. In the aerobic environment on the concrete in the headspace, sulfur oxidizers oxidize H2S to sulfuric acid. The moist environment in the sewer pipe is ideal for growth of the sulfur oxidizers.

  12. Concrete corrosion • Corrosion control: • inhibit SRBs by addition of alternate electron acceptors • treat the concrete with a high pH solution to maintain neutral surface • apply a plastic coating

  13. Methylation of metals • There are a number of metals and metalloids that are microbially methylated. In some cases the resulting methylated metal is more toxic and in some cases less toxic than the original metal. • Two examples: • Mercury – mercury is one of the most common metal pollutants found in the environment. Microbes methylate mercury under both aerobic and anaerobic conditions although methylation by SRBs (anaerobic) is thought to be the primary route. Methylation reactions involve vitamin B12, methylcobalamine. CH3CoB12 + Hg2+ + H2O CH3Hg+ + H2OCoB12+ methylmercury methylcobalamine CH3CoB12 + CH3Hg+ + H2O (CH3)2Hg+ + H2OCoB12+ methylcobalamine dimethylmercury

  14. The reason for methylation of mercury is not well understood but it is thought that it may be a detoxification mechanism. Unfortunately, methylmercury and dimethylmercury are highly toxic. Since they are more lipophilic than other forms of mercury, methylmercury partitions into lipids and is subject to biomagnification. As a result of methylmercury contamination, there are advisories on levels of fish consumption in some lakes in the US and Europe.

  15. 2. Selenium - For selenium, the methylated form is less toxic than the anions selenate and selenite. As a result, methylation has been proposed as a detoxification mechanism. Although not as common a pollutant as mercury, one well-documented case of selenium poisoning is in the Kesterton wildlife refuge in California. Here, the need for irrigation in agriculture caused the accumulation of salts including selenium salts during evaporation of applied water. These salts were washed into the Kesterton wetlands areas creating high levels of selenium and leading to extensive bird kills. Methylation of the selenium has been proposed as a way to reduce selenium concentration in the marsh.

  16. Composting Although there are many backyard compost systems, there are many potential applications on a much larger scale for composting. Essentially, the compost process turns waste products into an organic soil amendment by taking advantage of the normal microbes found in soil and optimizing they carbon cycling activities. • There are three approaches to composting. • Static piles lead to uneven product quality and take several months or more. • Aerated piles have perforated pipes buried inside them to deliver air during the composting process. This allows control of both oxygen and temp. and speeds up the process to 3 to 4 weeks. • Continuous feed systems are large scale (used for municipal waste) and use grinders to produce input material of similar size and consistency. The input material is also moistened and oxygen and temp. are controlled. In such a system, the composting process can be completed in 2 to 4 days.

  17. The compost ecosystem: high substrate density mesophilic thermophilic temp usually aerobic diverse microbial populations Temperature in composting community changes rapidly 80 activity stops 70 60 temperature - C thermophiles 50 mesophiles 40 30 20 10 0 1 2 3 4 5 6 7 Time 1. size and shape of compost heap 2.mixing 3.ventilation • Important parameters in composting: • temperature • moisture (50-60% optimal) • oxygen • pH • compost density The objective is to keep the temperature between 60 and 700C to maintain optimal activity. Temperature is controlled through:

  18. Microbiology of composting: Mixed population 5 - 10% substrate used by bacteria (108 - 1012 bacteria/g peaks at 55 – 600C) 15 - 30% used by actinomycetes (107 - 109 actinomycetes/g which peak after bacteria) 30 - 40% used by fungi (105 - 108 fungi/g which peak when T declines (< 500C)) Compost density and makeup are important for a successful process. Material that is too dense will not allow good air flow and oxygenation. Also, dense compost tends to get saturated leading to anaerobic conditions. Anaerobic conditions are avoided because of production of gaseous products including volatile organics, ammonia, and sulfide. The carbon:nitrogen ratio is also important: bacteria 5:1 Microbial compostion (C/N ratio) fungi 10:1 Substrate composition (C/N ratio) bacteria 10:1 to 20:1 Optimal is 25:1 to 40:1 fungi 150:1 to 200:1

More Related