html5-img
1 / 2

Status of Trigger Rates w /PU - I -- W. Smith, E. Perez & C. Leonidopoulos

Status of Trigger Rates w /PU - I -- W. Smith, E. Perez & C. Leonidopoulos. L1 Trigger: No PU: 38 kHz vs. PU=10: 61 kHz (60% increase) L1 menu for 5e32 does not need dramatic changes L1_HTT50 & lowest threshold Mu3+Jet16 should be prescaled May have to use “backup seeds” for 1E33 earlier

neila
Download Presentation

Status of Trigger Rates w /PU - I -- W. Smith, E. Perez & C. Leonidopoulos

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status of Trigger Rates w/PU - I-- W. Smith, E. Perez & C. Leonidopoulos • L1 Trigger: • No PU: 38 kHz vs. PU=10: 61 kHz (60% increase) • L1 menu for 5e32 does not need dramatic changes • L1_HTT50 & lowest threshold Mu3+Jet16 should be prescaled • May have to use “backup seeds” for 1E33 earlier • HLT: 5E32: No PU: 170 Hz, PU = 10: 500 Hz • Most of rate due to SUSY Paths (remove & PU=10: 250 Hz) • SUSY: Raising ET thresh. on corrected jets reduces PU effects on HT (X2) & MHT (X4) • TOP: Previous results on QuadJet paths incorrect • Using JEC & restricting to central jets reduce PU effects • QuadJet50_BTagIP: No PU: 1.7 Hz, PU=10: 6.9 Hz • QuadJet50_Jet40_Eta2.5: No PU: 2.1 Hz, PU=10: 5.3 Hz

  2. Status of Trigger Rates w/PU – II-- G. Lungu E, not ET Current • Ways to reduce PU effects • Raise the jet thresholds after corrections • good for rates, but inefficient • Raise the jet thresholds before corrections • eta dependent • Raise the tower thresholds • Most promising (L1 more robust) • Resolution issues, fixes MET • Vertex matching at HLT • Only applicable after initial selection (CPU) • L1FastJet corrections for PU • involves tracking and global unpacking • Less obvious, but with potential • Study pile-up vs pseudo-rapidity • Review jet ID definition • Review calorimeter noise cleaning • Study beam halo effects with pile-up • JetMET trigger subgroup meets weekly Emin Requires New JEC

More Related