1 / 18

EZ Positioning with SINAMICS S120 Basic Starter Offline Commissioning

EZ Positioning with SINAMICS S120 Basic Starter Offline Commissioning. Open Starter by Motor Icon for Sinamics. Open Starter Program & Go Offline. Go Offline with Starter –Use. From the Drive to be Commissioned Choose… Configuration. Open DDS (Drive Data Set). Choose Configure DDS…

najwa
Download Presentation

EZ Positioning with SINAMICS S120 Basic Starter Offline Commissioning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EZ Positioning with SINAMICS S120Basic Starter Offline Commissioning

  2. Open Starter by Motor Icon for Sinamics Open Starter Program & Go Offline Go Offline with Starter –Use

  3. From the Drive to be Commissioned Choose… Configuration Open DDS (Drive Data Set) • Choose Configure DDS… • Offline Configuration Wizard is Opened

  4. Control Structure Setup • Select Speed Control with Encoder • Use Function Modules when Needed • For EPOS Basic Positioner is Needed • Next, Select Continue

  5. Power Unit Configuration Power Unit Data Up-read in Auto Configuration (Drive-CLIQ) • Confirm Device type is Correct via Part label • Select Continue for next Configuration Screen

  6. Motor Configuration Motor Data Up-read in Auto Configuration (Drive-CLIQ) ** • **If Motor is a Drive-CLIQ Motor • Non Drive-CLIQ Motors can be Selected from List • Third Party Motors can have data entered

  7. Holding Brake Configuration Motor Data Up-read in Auto Configuration (Drive-CLIQ) ** • **If Motor is a Drive-CLIQ Motor • Non Drive-CLIQ Motors Check Motor Name Plate • DEMO drive do not Use Holding Brakes

  8. Encoder Configuration Encoder Data Up-read in Auto Configuration (Drive-CLIQ) ** • **If Encoder / Motor is a Drive-CLIQ Motor • Siemens and Third Party Encoders can be Parameterized • Note Encoder 1 is from Motor Encoder

  9. Encoder Data Configuration Encoder Data Up-read in Auto Configuration (Drive-CLIQ) ** • **If Encoder / Motor is a Drive-CLIQ Motor • Siemens and Third Party Encoders can be Parameterized • Note Encoder 1 is from Motor Encoder

  10. EPOS Only - Encoder Used for Position Sensing Select Encoder Used • Note that Encoder_4 refers to Device number 4 • Usually Motor Encoder used for Position Sensing

  11. EPOS Only – Mechanics Parameterize Gearing and Resolution • Modulo Axis can be programmed if need • This is only used in EPOS – For Basic Positioner • Load Revolutions = Gearing • Lu / Load is resolution • Default for testing in DEMO

  12. EPOS Only – Mechanics Parameterize Gearing and Resolution • Modulo Axis can be programmed • Load Revolutions = Gearing • Load Revolutions = Gearing • Lu / Load is resolution • Use Default for testing in DEMO

  13. Profibus Telegram type Choose Free Telegram with BICO • The Profibus Telegram will be Configured Later • Free Telegram allows Custom Telegrams • Script Files will be used to Setup Telegram Mapping

  14. Summary Data Acceptance Review data and Click Finish if Complete • After Completing DDS Wizard “Save and Compile” • DDS Wizard Data is now Complete

  15. Profibus Telegram Configuration • From the Drive to be Commissioned Choose… • Configuration • Use Up – Down Buttons to Move Drive Objects • CU is 1st and Drive (S) should be in Preceding Order • S7 Hardware Configuration Should be Closed!

  16. Profibus Telegram Configuration Select Word Length For Telegrams • CU Telegram not needed for Demo Word Length For Telegrams • EZ_EPOS uses 10 words IN and 10 Words Out • EZ_APC_SPEED uses 10 Words IN and 10 Words Out • EZ_Basic_SPEED uses 6 Words IN and 6 Words Out

  17. Profibus Telegram Configuration Select Transfer to HW Config • CU Telegram will be sent to the S7 Hardware Config. • Select Yes to transfer

  18. Profibus Telegram Configuration Telegram has Successfully been Transferred • Note Blue Check Boxes Save and Compile Program before Proceeding • Save and Compile Using Starter

More Related