1 / 31

ERT 417/4 WASTE TREATMENT IN BIOPROCESS INDUSTRY CH 7 – Fundamental of Biological Treatment

ERT 417/4 WASTE TREATMENT IN BIOPROCESS INDUSTRY CH 7 – Fundamental of Biological Treatment. Prepared by: Pn. Hairul Nazirah Abdul Halim. Objectives of Biological Treatment. Transform dissolved & particulate biodegradable constituents into acceptable end products

naiya
Download Presentation

ERT 417/4 WASTE TREATMENT IN BIOPROCESS INDUSTRY CH 7 – Fundamental of Biological Treatment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ERT 417/4 WASTE TREATMENT IN BIOPROCESS INDUSTRYCH 7 – Fundamental of Biological Treatment Prepared by: Pn. Hairul Nazirah Abdul Halim

  2. Objectives of Biological Treatment • Transform dissolved & particulate biodegradable constituents into acceptable end products • Capture and incorporate suspended & nonsettleable colloidal solid into a biological floc or biofilm. • Remove nutrients such as nitrogen & phosphorus • Remove specific trace organic compounds

  3. Schematic Flow Diagram For Biological Processes Flow diagram for biological process used for w/w treatment: a) Activated-sludge process

  4. Flow diagram for biological process used for w/w treatment: b) Aerated lagoons

  5. Flow diagram for biological process used for w/w treatment: c) Trickling Filters

  6. Flow diagram for biological process used for w/w treatment: d) Rotating Biological Contactors.

  7. Role of Microorganisms in W/w Treatment • To oxidize the dissolved and particulate carbonaceous organic matter into simple end products and additional biomass • Equation for aerobic biological oxidation of organic matter: • v1 (organic material) + v2 O2 + v3 NH3 + v4 PO43- v5 (new cells) + v6 CO2 + v7 H2O vi = stoichiometric coefficient. microorganisms

  8. Types of Biological Processes for W/w Treatments • 2 categories: 1. Suspended growth process 2. Attached growth process

  9. Biological Process Aerobic / Anaerobic Suspended Growth Process (SGP) • Activated Sludge Process • Aerated Lagoon • Aerobic/anaerobic Digestion Attached Growth Process (AGP) • Trickling Filters • Rotating Biological Contactors (RBC) • Packed Bed Reactors

  10. Suspended Growth Process (SGP) • Microbs maintain in liquid suspension by mixing • Aerobic or anaerobic process • Most common SGP is the Activated Sludge Process.

  11. Suspended growth biological treatment process (a-2) view of plug-flow activated-sludge process. (b-2) view of complete-mix activated-sludge process.

  12. Attached Growth Process (AGP) • Microbs attach to an inert packing material • Packing material: rock, gravel, slag, sand, redwood, plastics & synthesis materials • Aerobic or anaerobic process • Most common AGP is the Trickling Filter.

  13. Attached growth biological treatment process a-2) view of tricking filter with rock packing b-2) view of tower tricking filter with plastic packing The tower filter is 10 m high and 50 m in diameter.

  14. Self Reading: • Composition & Classification of Microorganisms • Introduction to Microbial Metabolism

  15. Bacterial Growth Bacterial Growth Patterns in a Batch Bioreactor Figure 7-10 Batch process biomass growth process with changes in substrate and biomass versus time

  16. Lag phase – time required for organisms to acclimate to their new environment before significant cell division and biomass production occur. • Exponential growth phase – bacterial cells are multiplying at maximum rate • No substrate and nutrients limitation • Biomass increase exponentially • Temp. affects the growth

  17. Stationary phase - biomass conc. remains relatively constant with time - No longer exponential growth - Offset by the death of cells • Death phase • Substrate has been depleted • No growth • Exponential decline in biomass conc.

  18. Biomass yield, Yis the ratio of the amount of biomass produced to the amount of substrate consume (g biomass/ g substrate) Biomass yield, Y = g biomass produced g substrate utilized (i.e., consumed)

  19. Microbial Growth Kinetics • The oxidation of substrate and the production of biomass which contributes to the total suspended solids (TSS) concentration in a biological reactor. • Performance of biological process for w/w treatment depends on the: i) dynamic of substrate utilization ii) microbial growth

  20. Rate of utilization of soluble substrates • Where: rsu = rate of substrate conc. change due to utilization (g/m3.d) k = maximum specific substrate utilization rate (g substrate/ g microorganism.d) X = biomass (microb) conc. (g/m3) S = growth-limiting substrate conc. in solution (g/m3)

  21. Where: µm =maximum specific bacterial growth rate (g new cells/g cells.d) k = maximum specific substrate utilization rate (g/g.d) Y = true yield coefficient (g/g)

  22. Substrate Removal in Attached Growth Treatment Process • Biofilm consist of microbs, particulate material and extracellular polymers is attached and covers the support packing. • Support packing – plastic, rock, etc • Biofilm thickness: 100 um – 10 mm • Stagnant liquid layer separates the biofilm from bulk liquid • Substrates, oxygen & nutrients diffuse across stagnant liquid layer to biofilm • Product of biodegradation from the biofilm enter the bulk liquid after diffusion across the stagnant film

  23. Figure 7-16 Schematic representation of the cross section of a biological slime in a trickling filter

  24. Aerobic Biological Oxidation • Aerobic suspended growth or attached growth treatment processes. • Both required sufficient contact time between w/w and microbs, sufficient oxygen and nutrients.

  25. bacteria bacteria Stoichiometry of Aerobic Biological Oxidation • Oxidation and synthesis: COHNS + O2 + nutrients CO2 + NH3 + C5H7NO2 + other end products • Endogenous respiration: C5H7NO2 + 5O2 5CO2 + 2H2O + NH3 + energy

  26. Anaerobic Fermentation and Oxidation • Primarily for the treatment of waste sludge and high-strength organic waste. • Advantages: - lower biomass yield - produce energy (methane) - cost effective as compared to aerobic process with saving in energy, nutrient addition and reactor volume. • Process Description • Hydrolysis • Fermentation • Methanogenesis

  27. 1. HYDROLYSIS • Particulate material is converted to soluble compound • soluble compound is hydrolyzed to simple monomers • Monomers are used by bacteria to perform fermentation

  28. 2. FERMENTATION • Also refer to as asidogenesis • Amino acids, sugars and some fatty acids are degrade further as shown in Fig. 7-25. • Final products of fermentation: acetate, H2 & CO2 are precursors of methane formation (methanogenesis). 3. METHANOGENESIS • Carried out by a group of organisms – methanogens. • To produce methane.

  29. Figure 7-25 Anaerobic process schematic of hydrolysis, fermentation and methanogenesis.

  30. Figure 7-26 Carbon and hydrogen flow in anaerobic digestion process.

  31. Stoichiometry of Anaerobic Fermentation & Oxidation

More Related