1 / 15

ENVE 201 Environmental Engineering Chemistry 1

ENVE 201 Environmental Engineering Chemistry 1. SOLIDS (Chapter 26) Dr. Aslıhan Kerç. SOLIDS. Solid matter  in liquid and semi -l iquid materials, measured in: - Potable waters - Wastewater - Domestic and industrial wastes - Sludges

Download Presentation

ENVE 201 Environmental Engineering Chemistry 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ENVE 201EnvironmentalEngineeringChemistry 1 SOLIDS (Chapter 26) Dr. Aslıhan Kerç

  2. SOLIDS • Solid matter  in liquid and semi-liquid materials, measured in: - Potable waters - Wastewater - Domestic and industrial wastes - Sludges • All matter except the water contained in liquid materials is classified as solid matter.

  3. SOLIDS • Solids: Matter that remains as residue upon evaporation and drying @103 – 105oC • Gravimetric methods are used for solids determination - Dissolved - Suspended - Volatile - Fixed solids

  4. Dissolved – Undissolved Solids • In potable waters most of the matter is in dissolved form and consists of inorganic salts, small amount of organic matter, dissolved gases. • Dissolved solids  20 – 1000 mg/L Hardness increases with total dissolved solids • Total dissolved solids measurement  Drying at 103 – 105oC

  5. Dissolved – Undissolved Solids • Dissolved solids analysis  Conducted at 180oC. (high temperature  to remove all mechanically bounded water) • Undissolved subtsances  Suspended matter or suspended solids

  6. Volatile and Fixed Solids • Solids determination in organic wastes (domestic, industrial wastes and sludges)  Measure of organic matter. • Combustion procedure is used in which organic matter is converted to gaseous CO2 and water

  7. Volatile and Fixed Solids • Controlled temperature  prevent decomposition and volatilization of inorganic substances • Ignition at 550oC  Lowest temperature at which organic matter oxidizes. Inorganic salts are stable

  8. Volatile and Fixed Solids • Organic matter  Loss in weight through high temperature oxidation and volatilization • Ignition at 550oC  Pyrolysis oof carbohydrates and other organics

  9. Volatile and Fixed Solids • At 550oC minimal decompsition of inorganic salts • Ammonium salts are vloatilized • Other inorganic salts stay stable, exception: MgCO3

  10. Volatile and Fixed Solids • Analysis is conducted in muffle furnace  Accurate control of temperature CaCO3 decomposes @ 825oC • CaCO3 is a major component of inorganic salts • Dissolved inorganic salts are not a consideration  removed during filtration

  11. Volatile Solids • If wastewater (especially industrial) contains volatile solids in the organic portion (short chain fatty acids, ketones, aldehydes, HC)  lost during evaporation. Solids measurement does not give idea about organic content.

  12. Settleable Solids • Solids in suspension that will settle by the influence of gravity • If specific gravity > water  settle • Sludges  accumulation of settleable solids • Settleable solids determination is important for the design of sedimentation units.

  13. Settleable Solids • Determined using Imhoff cone • Allow 1 h settling • Reported as : mL / L

  14. Observation of sludge characteristics in an Imhoff Cone

  15. Environmental Significance of Solids • For drinking water use, dissolved solids should be < 500 mg/L • If higher  Laxative or reverse effects on people (observed on passangers) • Standard recommended max. value 1000 mg/L

More Related