1 / 13

Machine Guarding

Machine Guarding. Machine Guarding. OSHA Standard 1910.212. OSHA’s Top 20. General Industry Most Frequently Cited Violations 6 of top 20 deal with guarding issues one of these electrical guarding. # 6.

mvidal
Download Presentation

Machine Guarding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Machine Guarding

  2. Machine Guarding • OSHA Standard 1910.212

  3. OSHA’s Top 20 • General Industry Most Frequently Cited Violations • 6 of top 20 deal with guarding issues • one of these electrical guarding

  4. # 6 • 1910.212(a)(1) “General Requirements for All Machinery” - Point of operation guard for in-going nip points, rotating parts, flying chips and sparks

  5. # 7 • 1910.212(a)(3)(iii) “General Requirements for All Machinery” - Special tools for placing and removing material from the danger zone during the operating cycle of machinery were not used to keep the operators hand out of the danger zone.

  6. #10 & # 17 • 1910.219(d)(1) “Mechanical Power-Transmission Apparatus” - Pulleys which are seven (7) feet or less from the floor or working platform were not effectively guarded.

  7. # 15 • 1910.213(h)(1) “Woodworking Machinery Requirements” - The upper hood of a radial arm saw did not completely enclose the upper portion of the blade including the end of the saw arbor.

  8. # 8 • 1910.303(g)(2) “Guarding of Live Electrical Parts” - Live parts of electrical equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosure.

  9. General Requirements • Protection from hazards: • point of operation • ingoing nip points • rotating parts • flying chips • sparks

  10. Barriers Distance Tools in hazard zone Methods of Guarding

  11. Two Packaging Systems • Small bags - 55 pound bags or less • Large bag - 2000 pound

  12. Team members: operators maintenance engineering safety managers Team Evaluation

  13. Team Activities • Review OSHA requirements • Equipment review • Proposal developed • Guards constructed • Modifications as needed

More Related