1 / 34

Overview of ANSI’s International Policy Activities: Regional and Bilateral Programs

Overview of ANSI’s International Policy Activities: Regional and Bilateral Programs. International Engagement: Regional and Bilateral Policy. U.S. PUBLIC SECTOR. U.S. PRIVATE SECTOR. U.S. GOVERNMENT. COMPANIES. TRADE ASSOCIATIONS. U.S.-Headquartered STANDARDS DEVELOPING ORGANIZATIONS.

montana
Download Presentation

Overview of ANSI’s International Policy Activities: Regional and Bilateral Programs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Overview of ANSI’sInternational Policy Activities:Regional and Bilateral Programs

  2. International Engagement:Regional and Bilateral Policy

  3. U.S. PUBLIC SECTOR U.S. PRIVATE SECTOR U.S. GOVERNMENT COMPANIES TRADE ASSOCIATIONS U.S.-Headquartered STANDARDS DEVELOPING ORGANIZATIONS APEC / EUROPEAN COMMISSION CONSUMER INTERESTS OTHERS REGIONAL STANDARDIZATION BODIES (COPANT, PASC, ESOs) Geneva-Headquartered INTERNATIONAL STANDARDIZATION BODIES (ISO, IEC) FOREIGN NATIONAL STANDARDS BODIES (ANSI PEER BODIES)

  4. International & Regional Organizations • International • ISO - International Organization for Standardization • IEC – International Electrotechnical Commission • Regional • COPANT – Pan American Standards Commission • PASC – Pacific Area Standards Congress • ESOs – European Standards Organizations • CEN - European Committee for Standardization • CENELEC - European Committee for Electrotechnical Standardization • ETSI - European Telecommunications Standards Institute

  5. ANSI International Policy Department • Overarching International Policy • ANSI International Policy Committee (IPC) • ISO Policy • ANSI ISO Council (AIC) and ANSI ISO Forum (AIF) • ISO General Assembly, ISO Council, ISO Technical Management Board (TMB) • IEC Policy • US National Committee to the IEC (USNC) Council and Tech Mgt Committee • IEC Council, IEC Council Board, IEC Standardization Management Board (SMB) • Regional & Bilateral Policy • Three ANSI Regional Standing Committees (RSCs): • RSC-Americas (RSC-A) COPANT (inc. Brazil) • RSC-Asia Pacific (RSC-AP) PASC (inc. China, India) • RSC-Europe, Middle East, Africa (RSC-EMEA) ESOs (CEN, CENELEC, ETSI)

  6. ANSI International Policy Committee • The ANSI International Policy Committee (IPC) is the ANSI governance body responsible for the formulation of overarching ANSI International Policy which includes converging ISO and IEC policy issues, and regional and bilateral policy.

  7. ANSI International Policy Structure

  8. ANSI International & Regional Strategic PlanANSI IPC Mission Develop and maintain ANSI’s international strategies and goals for standards and conformity assessment to achieve these objectives: • Foster global trade / Support U.S. Trade Agenda & Foreign Market Access • Meet societal needs related to security, safety, health, and the environment • Promote fair play and equitable national treatment within global standardization infrastructures • Promote effective leadership and technical expertise in international and regional organizations • Protect intellectual property rights • Enhance global competitiveness of U.S. business

  9. ANSI Regional Interaction (Asia Pacific) The United States is highly engaged in Asia Pacific Standards and conformance activities: • ANSI is the official U.S. member of the Pacific Area Standards Congress (PASC) • 24 Members of PASC. • The U.S. is also represented in the four of the five Asia Pacific Specialist Regional Bodies: • Pacific Area Standards Congress (PASC) • Pacific Area Cooperation (PAC) • Asia Pacific Laboratory Accreditation Cooperation (APLAC) • Asia-Pacific Legal Metrology Forum (APLMF) • Asia-Pacific Metrology Programme (APMP) (non-member) • The SRBs provide critical specialized support to the APECCommittee for Trade and Investment (CTI) –Subcommittee on Standards and Conformance (SCSC)

  10. ANSI Regional Interaction (Americas) The United States is engaged in standards and conformance activities in the Americas: • ANSI is the official U.S. member of the Pan American Standards Commission (COPANT) and a full member of the InterAmerican Accreditation Cooperation (IAAC) • 27 Members of COPANT • The U.S. is also represented in the InterAmerican Metrology System (SIM) by NIST • The three specialist regional bodies (SRBs) of the Americas are: • Pan American Standards Commission (COPANT) • InterAmerican Accreditation Cooperation (IAAC) • InterAmerican Metrology System (SIM) • The SRBs provide specialized support in the areas of standardization, accreditation and metrology in the Americas

  11. European StandardsOrganizations (ESOs) • CEN, CENELEC, and ETSI are the European counterparts to the ISO, IEC, and ITU-T and are known collectively as the European Standards Organizations (ESOs) • The ESO’s are composed of the national standards bodies of Europe • CEN the European Committee for Standardization, produces European standards in all areas except for electrotechnical and telecommunications • CENELEC the European Committee for Electrotechnical Standardization, works to produce a single set of harmonized electrotechnical standards in Europe • ETSI the European Telecommunications Standards Institute, determines and produces European telecommunications standards • ANSI interacts with the ESOs (and the European Commission) in various ways, including holding 21 ANSI-ESO dialogues since 1989. In 2005, ANSI also began holding delegation meetings with the ESO’s Joint Presidents Group (JPG).

  12. European StandardsOrganizations (ESOs) ANSI – ESO Interaction • Ongoing interaction • February 2008, CEN/CENELEC/ETSI/ANSI Interoperability Conference – Warsaw, Poland • September 2008, ANSI meeting with ESO Joint Presidents Group (JPG) and European Commission – Washington, DC • September 2008, ANSI-ESO Conference – Supporting Transatlantic Trade – Washington, DC • Q4 2009, ANSI-CEN Conference on Building Information Modeling.

  13. International Projects and Initiatives

  14. Overview of Regional and Bilateral Initiatives

  15. China Program Genesis • ANSI hired a Representative for China Affairs (Elise Owen) and launched China Program in 2006, responding to member focus on issues and opportunities in China • Three main priority areas for ANSI China Program: • Communicate and promote U.S. positions for standardization and conformity assessment in China • Work to ensure that standards facilitate trade • Promote the benefits of the U.S. Standards System in China • 2007 ANSI Membership Survey defined overarching areas of concern for China, including transparency, conformity assessment policies, and inconsistent U.S. message • China Program facilitates “continuous engagement” through senior and working-level communication, workshops, projects, etc. to effectively advance U.S. priorities

  16. China Program: Recent Accomplishments • April 2008: MOU with Certification and Accreditation Administration of China (CNCA) that builds on a longstanding MOU with the Standardization Administration of China (SAC) • Supporting Initiatives to advance the safety of products exported from China to the U.S. (e.g. toys) • Increasing outreach to and visibility in Chinese industry • Addressing high-level China policy concerns(e.g. TC participation policies, revisions to CCC regulations, etc.) • Launching ANSI Manufacturer Member Roundtable in China • Development of StandardsPortal

  17. Why StandardsPortal? • Problem: • No central resource to help companies find the standards, conformity assessment and technical regulations needed to enter and compete in target markets. • Solution: • StandardsPortal answers key questions exporters face when attempting to enter their target markets

  18. ANSI Engagement in India • January 2007: ANSI President and CEO India Networking Visit • March 2007: ANSI and U.S. Department of Commerce (DOC) Staff-level Fact-finding Mission • December 2007: ANSI signs tripartite MOU with Bureau of Indian Standards (BIS) and Confederation of Indian Industry (CII) • September 2008: ANSI, CII and BIS co-organize workshop on “Leveraging the TBT Agreement” sponsored by U.S. DOC and Indian Ministry of Commerce and Industry • March 2009: U.S. – India Standards and Conformance Cooperation Program (SCCP) launched in Washington and Delhi (www.standardsportal.org/us-indiasccp)

  19. U.S.–India SCCP: Key Organizations • Funding Agency: U.S. Trade and Development Agency (www.ustda.gov) • Grantee: Confederation of Indian Industry (www.ciionline.org) • Contractor: American National Standards Institute (www.ansi.org) • An SCCP Advisory Panel will provide recommendations as to the direction of the program and will be comprised of individuals from U.S. government and private sector organizations

  20. U.S. – India SCCP: Program Components (1 of 3) Standards and Conformance Workshops: • U.S. organizations will sponsor and co-organize a series of workshops focusing on issues related to standards and conformance for specific industry sectors • At least five (5) workshops will be conducted • The workshops will bring together select representatives from the industry for targeted technical exchange • Workshop topics will be chosen after interested organizations submit their proposals to ANSI for review by the SCCP Advisory Panel

  21. U.S. – India SCCP: Program Components (2 of 3) U.S. Standards and Conformance Directory: • The Directory will include information on standards, conformance procedures, technical regulations, and trade capacity building initiatives for five key sectors • The Directory is intended to serve as a foundation for a comprehensive directory on U.S. market access and market acceptance requirements • A corresponding Indian Directory will likely be developed under a separate initiative • The U.S. and Indian Directories will be made available online through StandardsPortal (www.standardsportal.org)

  22. U.S. – India SCCP: Program Components (3 of 3) Expansion of StandardsPortal -- New features to include: • Expanded information on the standards and conformance systems in India • Guide to U.S. best practices • Directory of conformance bodies in the U.S. • Directory of U.S. regulatory agencies

  23. Southeast Asia • 2007/2008: ANSI Carries out U.S. Trade and Development Agency (USTDA) sponsored Vietnam Standards Training Program (VSTP) • September 2008: ANSI delivers presentation to ASEAN Consultative Committee for Standards and Quality (ACCSQ) plenary meeting • Ongoing: Working to identify additional opportunities for projects and programs in individual Southeast Asian countries

  24. Future Areas of Focus: International Projects ANSI will continue its commitment to policy activities while also working to increase externally funded projects that support ANSI’s international policy objectives Benefits to ANSI Members: • Maximize international impact with limited resources • Strengthen international alliances and partnerships • Increase opportunities to address issues and concerns before they arise

  25. International Projects • Current Regions for Project Engagement: • China • India • Southeast Asia • Future Regions for Project Engagement: • Latin America • Africa • Middle East

  26. For more information: ANSI International Policy Department Contacts • Gary Kushnier, Vice President of International Policy 202-331-3604 gkushnie@ansi.org • Steven Cornish, Sr. Director – ISO Policy 212-642-4969 scornish@ansi.org • Charlie Zegers, Sr. Director – IEC Policy 212-642-4965 czegers@ansi.org • Steven Bipes, Sr. Director – Regional & Bilateral Programs 202-331-3607 sbipes@ansi.org • Elise Owen, ANSI Representative for China and India Affairs 202-331-3624 eowen@ansi.org

More Related