1 / 20

Chalcopyrite Thin-Film Solar Cells : Present and Future

Chalcopyrite Thin-Film Solar Cells : Present and Future. Solar Cell Clean & Regeneratable Energy Source - Sunlight. Wafer vs. Thin-Film Thin-film Solar Cells : Low material consumption, Potential reduction of manufacturing cost. Si Wafer Si thickness : 250-300 μ m. Si Thin-Film

molimo
Download Presentation

Chalcopyrite Thin-Film Solar Cells : Present and Future

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chalcopyrite Thin-Film Solar Cells : Present and Future

  2. Solar Cell • Clean & Regeneratable Energy Source - Sunlight

  3. Wafer vs. Thin-Film • Thin-film Solar Cells : • Low material consumption, Potential reduction of manufacturing cost Si Wafer Si thickness : 250-300 μm Si Thin-Film Si thickness : 1-10 μm

  4. Market Status of Thin-Film Solar Cells • Market share of thin-film solar cells decreased to 6.4% in 2005

  5. Manufacturing cost of Thin-Film Solar Cells

  6. Materials for Thin-Film Solar Cells • Single Element : a-Si:H, B-doped DLC, Fullerene • Binary Compound : CdTe, GaAs, Cu2S, Cu2O, InP, Zn3P2 • Ternary and Quaternary Compund : CIGS and related Chalcopyrites • Ideal Absorber Material : • ~1.5eV Direct Bandgap • High light Absorption • High Quantum Efficiency • Long Exciton Diffusion Length • Low Recombination Velocity

  7. Materials for Thin-Film Solar Cells • Thin film market share by technology (Source: U.S. Department of Energy)

  8. a-Si:H • Record Efficiency : 9.5% (NREL 4/03) • Advantages : • Simple Single Element • Properties are well known • Processes are well estabilished • Disadvantages : • Light-induced Degradation • Low Absorption • Low Exciton Mobility • CdTe • Record Efficiency : 16.5% (NREL 9/01) • Advantages : • Tolerant to deposition methods • Ideal Bandgap • High Absorption and High Efficiency • High stability • Disadvantages : • Strong Fluctuations in Parameters • Difficult to form highly stable ohmic contacts • Difficult to be p-doped • Hazardous Cadmium Contents • CIGS • Record Efficiency : 19.2% (NREL 1/08) • Advantages : • High Absorption and High Efficiency • High Stability • Disadvantages : • Complex Compound • Use of Rare Metals (In,Ga) • Cadmium Contents in Buffer Layer

  9. Structure of CIGS Solar Cell • Substrate Configuration • Well-Studied • 17-19% efficiency • Need Encapsulation • Superstrate Configuration • Lower Cost • Easier Encapsulation • 11-13% efficiency

  10. Front Contact • Development : • CdS:Al → ZnCdS → ZnO/ZnO:Al • (Optical transmittance is increased) • Role of i-ZnO : • Prevent direct contact of CIGS and ZnO:Al • Increase VOC at optimum thickness • ※ TCO deposition temperature should be low • (<150℃)

  11. Role of i-ZnO ZnO:Al CdS CIGS Discontinuity in Conduction Band : ΔEC = χB – χE Discontinuity in Conduction Band : ΔEg = ΔEC + ΔEV

  12. Buffer Layer • n-type semiconductor (bandgap: 2.0~3.6 eV) • PVD-grown CdS show non-uniform coverage • CBD-grown CdS is commonly used • Role of CdS layer : • Optimize band alignment • Mechanical protect against ZnO sputtering • Cd-free Alternatives : • CBD-ZnS (18.1%) • MOCVD-ZnSe • ALD-ZnSe • CBD-ZnSe • PVD-ZnIn2Se4 • Co-Sputtered Zn1-xMgxO • ALD-In2S3

  13. Back Contact • Only Au and Ni ensure ohmic contact • Ohmic behavior at CIGS/Mo interface : • MoSe2 (1.41eV bandgap) formation over 500℃ • Na impurities can aid formation of MoSe2

  14. Absorber • Slightly Cu-deficient composition : • p-type conductivity • High-efficiency with bandgap range 1.2-1.25 eV • [Ga]/[In+Ga] ratio = 25~30%

  15. Composition of Cu-based Chalcopyrites Se In Ga S

  16. Composition of Cu-based Chalcopyrites • Slightly Cu-deficient composition • More Cu-deficient surface layer : stable ordered vacancy compound • Cu(In,Ga)3Se5 • Weak n-type behavior of OVC surface layer • Forming buried pn-junction → minimizes recombination • Formation energies of defects in CuInSe2 are low • Cu vacancy is most favored point defect → Shallow acceptor • 2 VCu + InCu is most favored defect complex → Neutral • 2 VCu + GaCu is less stable • → Hard to form OVC layer • CuInS2 → Hard to form appropriate composition(easy to form CuIn5S8)

  17. Absorber Deposition Methods Ideal CIGS layer : Adequate composition (220/204) orientation Large Grain Conductive CuSe2 phase formation must be prevented

  18. Absorber Deposition Methods - Vacuum • 1. Co-evaporation (19.9%) • Composition can be adjusted by deposition step • OVC layer is formed well • Well-established process • 2. Selenization of Metallic Precursor (14.7%) • Metallic precursor(Cu,In,Ga) deposited by sputtering • Followed by annealing in selenium atmosphere • H2Se is efficient but toxic • 3. Compound-evaporation (9.6%) • Simple and easy to control compared to co-evaporation • lower efficiency • 4. Chemical vapor deposition (No Record) • 5. Close-spaced vapor transport (No Record)

  19. Absorber Deposition Methods – Non-Vacuum • 1. Spray Pyrolysis (4-5%) • Precursors – CuCl2, InCl3, GaCl3, N,N-dimethylselenourea • Impurity(O,C,Cl) incorporation • 2. Electrodeposition (7%) • 15.4% efficiency after PVD stoichiometry correction • 3. Electroless deposition • 13.4% efficiency after PVD stoichiometry correction • 4. Chemical bath deposition • 7.3% efficiency after PVD stoichiometry correction • 5. Chalcogenization of particulate precursor layer (13%) • Precursors – Metallic powder of oxide • Easy to control composition • Toxic H2Se have to be used

  20. Future Works • Atomic pressure plasma treatment on screen-printed CIGS layer • Increase grain size • Adjust Surface and bulk Composition

More Related