1 / 30

Speeds and Feeds

Speeds and Feeds. In This Lesson. Discuss different cutting tools Learn the definition of speeds and feeds Calculate cutting speeds and feed rates Practice. Basic Cutting Tools. Non-Center Cutting End Mill. Ball End Mill. Center Cutting End Mill. Indexable Shell Mill.

mohammedj
Download Presentation

Speeds and Feeds

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Speeds and Feeds

  2. In This Lesson • Discuss different cutting tools • Learn the definition of speeds and feeds • Calculate cutting speeds and feed rates • Practice

  3. Basic Cutting Tools Non-Center Cutting End Mill Ball End Mill Center Cutting End Mill Indexable Shell Mill

  4. Basic Cutting Tools Combination Drill & Countersink Spotting Drill Countersink

  5. Flutes 4 Flute End Mill 2 Flute End Mill • More cutting edges, longer tool life • Used for harder metals • Clogs easily in deep cuts • More room for chip evacuation • Used for light metals • Weak, short tool life

  6. Center vs. Non-Center Cutting 4 Flute Non-Center Cutting 2 Flute Center Cutting 4 Flute Center Cutting

  7. Milling Tools

  8. Milling Tools

  9. Milling Tools

  10. Cutting Tool Material Video

  11. Definitions • Cutter Speed – The rate of a tool measured in surface feet per minute. • Spindle Speed – The number of revolutions per minute (RPM) that is made by the cutting tool of a machine. • Feed – The distance advanced by the cutting tool along the length of the work for every revolution of the spindle.

  12. CS (ft/min) C (in.) CS  12 (in./min) d (in.) Spindle Feeds Formula • Defined in revolutions per minute (RPM) • Found by dividing the cutter speed by the circumference of the tool N = circumference N =

  13. Recommended Cutting Speeds

  14. CS  12 (in./min) d (in.) Example What spindle speed should be used to mill aluminum with a ½ inch end mill? N = Cutting Speed for Aluminum is 250 surface ft/min

  15. CS  12 (in./min) 250 ft/min  12 d (in.)   0.5 in. Example What spindle speed should be used to mill aluminum with a ½ inch end mill? N = Cutting speed for aluminum is 250 surface ft/min N = = 1910RPM

  16. CS  12 (in./min) d (in.) Your Turn What spindle speed should be used to mill soft cast iron with a ¼ inch end mill? N = Cutting speed for soft cast iron is 80 surface ft/min 80  12 = 1222 RPM N=  0.250

  17. CS  12 (in./min) d (in.) Calculating Feed Rates Fm = ft x nt x N Fm = Feed rate in inches/min ft = Feed in inches/tooth nt = Number of teeth on the tool N= Spindle speed =

  18. Recommended Tool Feed

  19. Example Feed Rate Calculate the feed rate for end milling aluminum with a 2 flute, ½ inch HSS end mill. Fm = ft nt N Tool Feed (in./tooth) ft=.005 in./tooth

  20. CS  12 (in./min) d (in.) Example Feed Rate Calculate the feed rate for end milling aluminum with a 2 flute, ½ inch HSS end mill. Fm = ft nt N Ft = 0.005 in./tooth 250  12 N = = 1910 RPM =   0.5 nt= 2 teeth Fm = 0.005  2  1910 Fm = 19 in./min

  21. 250  12 = CS  12 (in./min)   0.75 d (in.) Your Turn Calculate the feed rate for face milling aluminum with a 4 flute, ¾ inch HSS end mill. Fm = ft nt N nt= 4 teeth Ft = 0.005 in./tooth N= = 1273 RPM Fm = 0.005  4  1273 Fm = 25.46 in./min

  22. Factors That Affect Feed Rates • Power of spindle motor • Condition of cutting tool • Depth of cut • Quality of surface finish required • Roughing vs. finish cuts • Condition of the machine • Strength of fixture

  23. Tool Feed Rate for Holes Penetration rate in inches/revolution Tool Feed Rate (ipm) = ipr  RPM Feed in inches/minute Spindle speed in revolutions/minute

  24. Recommended Drilling Feeds

  25. CS  12 (in./min) d (in.) Drill Feed Example What tool feed rate should be used for drilling a .375 inch hole in aluminum? Tool Feed Rate (ipm) = ipr  RPM N= 250 12 =  0.375 = 2,546 RPM

  26. Drill Feed The tool diameter is given in decimal form The diameter is .375. Tool Feed Rate (ipm) = ipr  RPM = 0.005  2546 = 12.73 ipm

  27. CS  12 (in./min) d (in.) Your Turn What tool feed rate should be used for drilling a .25 inch hole in copper? Tool Feed Rate (ipm) = ipr x rpm N= 100 12 =  0.25 = 1,528 RPM

  28. Drill Feed Our diameter is 0.25 Tool Feed Rate (ipm) = ipr  RPM = 0.004  1528 = 6.1 ipm

  29. CS  12 (in./min) d (in.) Special Operations N= Other special operations require slower speeds: Reaming – ½ to ⅔ of that used for drilling the material Counterboring – ¼ of that used for drilling the material Countersinking – ¼ of that used for drilling the material Tapping (threading) – Determined by many factors (usually range from 50 to 300 RPM)

  30. References Kibbe, R.R., Neely, J.E., Meyer, R.O., & White, W.T. (2002). Machine tool practices. Upper Saddle River, NJ: Prentice Hall. Oberg, E., Jones F. D., Horton, H. L., & Ryffell, H. H. (2000). Machinery’s handbook (26th ed.). New York, NY: Industrial Press Inc.

More Related