1 / 28

MANE 4240 & CIVL 4240 Introduction to Finite Elements

MANE 4240 & CIVL 4240 Introduction to Finite Elements. Prof. Suvranu De. Numerical Integration in 2D. Reading assignment: Lecture notes, Logan 10.4. Summary: Gauss integration on a 2D square domain Integration on a triangular domain Recommended order of integration

moe
Download Presentation

MANE 4240 & CIVL 4240 Introduction to Finite Elements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MANE 4240 & CIVL 4240Introduction to Finite Elements Prof. Suvranu De Numerical Integration in 2D

  2. Reading assignment: Lecture notes, Logan 10.4 • Summary: • Gauss integration on a 2D square domain • Integration on a triangular domain • Recommended order of integration • “Reduced” vs “Full” integration; concept of “spurious” zero energy modes/ “hour-glass” modes

  3. Integration point Weight 1D quardrature rule recap Choose the integration points and weights to maximize accuracy Newton-Cotes Gauss quadrature 1. ‘M’ integration points are necessary to exactly integrate a polynomial of degree ‘2M-1’ 2. Less expensive 3. Exponential convergence, error proportional to 1. ‘M’ integration points are necessary to exactly integrate a polynomial of degree ‘M-1’ 2. More expensive

  4. Example f(x) x -1 1 A 2-point Gauss quadrature rule is exact for a polynomial of degree 3 or less

  5. 2D square domain t 1 1 1 s 1 Using 1D Gauss rule to integrate along ‘t’ Using 1D Gauss rule to integrate along ‘s’ Where Wij=Wi Wj

  6. For M=2 Wij=Wi Wj=1 Number the Gauss points IP=1,2,3,4

  7. The rule Uses M2 integration points on a nonuniform grid inside the parent element and is exact for a polynomial of degree (2M-1) i.e., A M2 –point rule is exact for a complete polynomial of degree (2M-1)

  8. 1 1 s1=0, t1=0 W1= 4 1 s 1 CASE I: M=1 (One-point GQ rule) is exact for a product of two linear polynomials t

  9. CASE II: M=2 (2x2 GQ rule) t 1 1 1 s 1 is exact for a product of two cubic polynomials

  10. CASE III: M=3 (3x3 GQ rule) t 1 1 3 6 2 1 1 9 7 s 4 8 5 1 is exact for a product of two 1D polynomials of degree 5

  11. Examples If f(s,t)=1 A 1-point GQ scheme is sufficient If f(s,t)=s A 1-point GQ scheme is sufficient If f(s,t)=s2t2 A 3x3 GQ scheme is sufficient

  12. 2D Gauss quadrature for triangular domains Remember that the parent element is a right angled triangle with unit sides The type of integral encountered t 1 t s=1-t t s 1

  13. Constraints on the weights if f(s,t)=1

  14. Example 1. A M=1 point rule is exact for a polynomial t 1/3 1 1/3 s 1

  15. Why? Assume Then But Hence

  16. Example 2. A M=3 point rule is exact for a complete polynomial of degree 2 t 1/2 1 1 2 1/2 s 3 1

  17. Example 4. A M=4 point rule is exact for a complete polynomial of degree 3 t (0.2,0.6) (1/3,1/3) 1 2 1 3 4 s (0.2,0.2) (0.6,0.2) 1

  18. Recommended order of integration “Finite Element Procedures” by K. –J. Bathe

  19. “Reduced” vs “Full” integration Full integration: Quadrature scheme sufficient to provide exact integrals of all terms of the stiffness matrix if the element is geometrically undistorted. Reduced integration: An integration scheme of lower order than required by “full” integration. Recommendation: Reduced integration is NOT recommended.

  20. 1 s t 1 s t s2 st t2 Which order of GQ to use for full integration? To computet the stiffness matrix we need to evaluate the following integral For an “undistroted” element det (J) =constant Example : 4-noded parallelogram

  21. 1 s t s2 st t2 s2t st2 1 s t s2 st t2 Hence, 2M-1=2 M=3/2 Hence we need at least a 2x2 GQ scheme Example 2: 8-noded Serendipity element

  22. 1 s t s2 st t2 s3 s2t st2 t3 s4 s3t s2t2 st3 t4 Hence, 2M-1=4 M=5/2 Hence we need at least a 3x3 GQ scheme

  23. Reduced integration leads to rank deficiency of the stiffness matrix and “spurious” zero energy modes “Spurious” zero energy mode/ “hour-glass” mode The strain energy of an element Corresponding to a rigid body mode, If U=0 for a mode d that is different from a rigid body mode, then d is known as a “spurious” zero energy mode or “hour-glass” mode Such a mode is undesirable

  24. Example 1. 4-noded element y 1 1 Full integration: NGAUSS=4 Element has 3 zero energy (rigid body) modes Reduced integration: e.g., NGAUSS=1 1 x 1

  25. Consider 2 displacement fields y y x x We have therefore 2 hour-glass modes.

  26. Propagation of hour-glass modes through a mesh

  27. Example 2. 8-noded serendipity element y 1 1 Full integration: NGAUSS=9 Element has 3 zero energy (rigid body) modes Reduced integration: e.g., NGAUSS=4 1 x 1

  28. Element has one spurious zero energy mode corresponding to the following displacement field Show that the strains corresponding to this displacement field are all zero at the 4 Gauss points y x Elements with zero energy modes introduce uncontrolled errors and should NOT be used in engineering practice.

More Related