1 / 29

Ch. 16:Solutions

Ch. 16:Solutions. A homogeneous mixture demonstrates uniform mixing of components. eg . Salt water. A heterogeneous mixture is characterized by observable segregation of component substances. Eg . Sand in water. Definitions. A solution is a homogeneous mixture

mlalonde
Download Presentation

Ch. 16:Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ch. 16:Solutions • A homogeneous mixture demonstrates uniform mixing of components. eg. Salt water. • A heterogeneous mixture is characterized by observable segregation of component substances. Eg. Sand in water.

  2. Definitions • A solution is a homogeneous mixture • A solute is dissolved in a solvent. • solute is the substance being dissolved • solvent is the liquid in which the solute is dissolved • an aqueous solution has water as solvent • A saturated solution is one where the concentration is at a maximum - no more solute is able to dissolve. • A saturated solution represents an equilibrium: the rate of dissolving is equal to the rate of crystallization. The salt continues to dissolve, but crystallizes at the same rate so that there “appears” to be nothing happening. • Solution formation animation

  3. Solubility and Miscibility • Solubility refers to the amount of substance needed to make a saturated solution at a specified temperature. • Ex. - NaCl has a solubility in water of 6M at 25° • - NaCl has a solubility in ethyl alcohol of 0.0009M at 25°. • Temperature influences how much solid will dissolve and how fast. Temp. will increase both. • Soluble refers to a substance that has a solubility of more than 0.1 mol per litre. • Saturated solutions are in a state of dynamic equilibrium between dissolved and undissolved solute particles

  4. Equilibrium is reached in Fig. 1.3

  5. Dissolution of Solid Solute What are the driving forces which cause solutes to dissolve to form solutions? 1. Covalent solutes dissolve by H-bonding to water or by LDF 2. Ionic solutes dissolve by dissociation into their ions. NaCl(s)  Na+ (aq) + Cl-(aq)

  6. Solution and Concentration • 4 ways of expressing concentration • Molarity(M):moles solute / Liter solution • Mass percent:(mass solute / mass of solution) * 100 • Molality* (m)- moles solute / Kg solvent • Mole Fraction(A) - moles solute / total moles solution * Note that molality is the only concentration unit in which denominator contains only solvent information rather than solution.

  7. % Concentration • % (w/w) = • % (w/v) = • % (v/v) =

  8. %m = 3.5 g CoCl2 100g H2O = 3.5% (m/m) % Concentration: % Mass Example 3.5 g of CoCl2 is dissolved in 100mL solution. Assuming the density of the solution is 1.0 g/mL, what is concentration of the solution in % mass?

  9. Concentration: Molarity Example If 0.435 g of KMnO4 is dissolved in enough water to give 250. mL of solution, what is the molarity of KMnO4? As is almost always the case, the first step is to convert the mass of material to moles. 0.435 g KMnO4 • 1 mol KMnO4 = 0.00275 mol KMnO4 158.0 g KMnO4 Now that the number of moles of substance is known, this can be combined with the volume of solution — which must be in liters — to give the molarity. Because 250. mL is equivalent to 0.250 L . Molarity KMnO4 = 0.00275 mol KMnO4 = 0.0110 M 0.250 L solution

  10. 3 Stages of Solution Process • Separation of Solute • must overcome IMF or ion-ion attractions in solute • requires energy, ENDOTHERMIC ( + DH) • Separation of Solvent • must overcome IMF of solvent particles • requires energy, ENDOTHERMIC (+ DH) • Interaction of Solute & Solvent • attractive bonds form between solute particles and solvent particles • “Solvation” or “Hydration” (where water = solvent) • releases energy, EXOTHERMIC (-DH)

  11. Factors Affecting Solubility 1. Nature of Solute / Solvent. - Like dissolves like (IMF) 2. Temperature - i) Solids/Liquids- Solubility increases with Temperature Increase K.E. increases motion and collision between solute / solvent. ii) gas - Solubility decreases with Temperature Increase K.E. result in gas escaping to atmosphere. 3. Pressure Factor - i) Solids/Liquids - Very little effect Solids and Liquids are already close together, extra pressure will not increase solubility. ii) gas - Solubility increases with Pressure. Increase pressure squeezes gas solute into solvent.

  12. Solubilities of Solids vs Temperature Solubilities of several ionic solid as a function of temperature. MOST salts have greater solubility in hot water. A few salts have negative heat of solution, (exothermic process) and they become less soluble with increasing temperature.

  13. Temperature & the Solubility of GasesThe solubility of gases DECREASES at higher temperatures

  14. Suppose you have 0.500 M sucrose stock solution. How do you prepare 250 mL of 0.348 M sucrose solution ? Concentration 0.500 M Sucrose 250 mL of 0.348 M sucrose Dilution When a solution is diluted, solvent is added to lower its concentration. The amount of solute remains constant before and after the dilution: moles BEFORE = moles AFTER C1V1 = C2V2 A bottle of 0.500 M standard sucrose stock solution is in the lab. Give precise instructions to your assistant on how to use the stock solution to prepare 250.0 mL of a 0.348 M sucrose solution.

  15. Dissolution at the molecular level? • Consider the dissolution of NaOH in H2O

  16. Henry’s LawThe effect of partial pressure on solubility of gases At pressure of few atmosphere or less, solubility of gas solute follows Henry Law which states that the amount of solute gas dissolved in solution is directly proportional to the amount of pressure above the solution. c = k P c = solubility of the gas (M) k = Henry’s Law Constant P = partial pressure of gas Henry’s Law Constants (25°C), k N2 8.42 •10-7M/mmHg O2 1.66 •10-6M/mmHg CO2 4.48•10-5M/mmHg

  17. Henry’s Law & Soft Drinks • Soft drinks contain “carbonated water” – water with dissolved carbon dioxide gas. • The drinks are bottled with a CO2 pressure greater than 1 atm. • When the bottle is opened, the pressure of CO2 decreases and the solubility of CO2 also decreases, according to Henry’s Law. • Therefore, bubbles of CO2 escape from solution.

  18. Henry’s Law Application • The solubility of pure N2 (g) at 25oC and 1.00 atm pressure is 6.8 x 10-4 mol/L. What is the solubility of N2 under atmospheric conditions if the partial pressure of N2 is 0.78 atm? Step 1: Use the first set of data to find “k” for N2 at 25°C Step 2: Use this constant to find the solubility (concentration) when P is 0.78 atm:

  19. Colligative Properties Dissolving solute in pure liquid will change all physical properties of liquid, Density, Vapor Pressure, Boiling Point, Freezing Point, Osmotic Pressure Colligative Properties are properties of a liquid that change when a solute is added. The magnitude of the change depends on the number of solute particles in the solution, NOT on the identity of the solute particles.

  20. Vapor Pressure Lowering for a Solution • The diagram below shows how a phase diagram is affected by dissolving a solute in a solvent. • The black curve represents the pure liquid and the blue curve represents the solution. • Notice the changes in the freezing & boiling points.

  21. Vapor Pressure Lowering • The presence of a non-volatile solute means that fewer solvent particles are at the solution’s surface, so less solvent evaporates!

  22. Application of Vapor Pressure Lowering • Describe what is happening in the pictures below. • Use the concept of vapor pressure lowering to explain this phenomenon.

  23. Mixtures of Volatile LiquidsBoth liquids evaporate & contribute to the vapor pressure

  24. Normal Boiling Process Extension of vapor pressure concept: Normal Boiling Point: BP of Substance @ 1atm When solute is added, BP > Normal BP Boiling point is elevated when solute inhibits solvent from escaping. Elevation of B. pt. Express by Boiling point Elevation equation

  25. Some Boiling Point Elevation and Freezing Point Depression Constants Normal bp (°C) Kb Normal fp (°C) Kf Solvent pure solvent (°C/m) pure solvent (°C/m) Water 100.00 +0.5121 0.0 1.86 Benzene 80.10 +2.53 5.50 4.90 Camphor 207 +5.611 179.75 39.7 Chloroform 61.70 +3.63 - 63.5 4.70 (CH3Cl) Boiling Point Elevation Tb = (Tb -Tb°) = i ·m ·kb Where, Tb = BP. Elevation Tb= BP of solvent in solution Tb° = BP of pure solvent m= molality , kb = BP Constant

  26. Freezing Point Depression • Normal Freezing Point: FP of Substance @ 1atm • When solute is added, FP < Normal FP • FP is depressed when solute inhibits solvent from crystallizing. When solution freezes the solid form is almost always pure. Solute particles does not fit into the crystal lattice of the solvent because of the differences in size. The solute essentially remains in solution and blocks other solvent from fitting into the crystal lattice during the freezing process.

  27. Freezing Point Depression Tf = i ·m ·kf Where, Tf = FP depression i = van’t Hoff Factor m= molality , kf = FP Constant Generally freezing point depression is used to determine the molar mass of an unknown substance. Derive an equation to find molar mass from the equation above. Phase Diagram and the lowering of the freezing point.

  28. Osmotic pressure • Osmosis is the spontaneous movement of water across a semi-permeable membrane from an area of low solute concentration to an area of high solute concentration • Osmotic Pressure - The Pressure that must be applied to stop osmosis P = i CRT where P = osmotic pressure i = van’t Hoff factor C = molarity R = ideal gas constant T = Kelvin temperature

  29. Osmosis and Blood Cells (a) A cell placed in an isotonic solution. The net movement of water in and out of the cell is zero because the concentration of solutes inside and outside the cell is the same. (b) In a hypertonic solution, the concentration of solutes outside the cell is greater than that inside. There is a net flow of water out of the cell, causing the cell to dehydrate, shrink, and perhaps die. (c) In a hypotonic solution, the concentration of solutes outside of the cell is less than that inside. There is a net flow of water into the cell, causing the cell to swell and perhaps to burst.

More Related