1 / 24

Generators & Motors

Generators & Motors. Physics 1161: Lecture 13. Textbook Sections 23-6 – 23-9 http://www.walter-fendt.de/ph14e/electricmotor.htm http://www.walter-fendt.de/ph14e/generator_e.htm. v. +. +. +. +. Review: Two uses of RHR’s. B. Force on moving charge in Magnetic field Thumb: v (or I)

mina
Download Presentation

Generators & Motors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Generators & Motors Physics 1161: Lecture 13 • Textbook Sections 23-6 – 23-9 http://www.walter-fendt.de/ph14e/electricmotor.htm http://www.walter-fendt.de/ph14e/generator_e.htm

  2. v + + + + Review: Two uses of RHR’s B • Force on moving charge in Magnetic field • Thumb: v (or I) • Fingers: B • Palm: F on + charge I F Palm: out of page. • Magnetic field produced by moving charges • Thumb: I (or v for + charges) • Fingers: curl along B field I

  3. Review: Induction • Lenz’s Law • If the magnetic flux (B) through a loop changes, an EMF will be created in the loop to oppose the change in flux • EMF current (V=IR) additional B-field. • Flux decreasing => B-field in same direction as original • Flux increasing => B-field in opposite direction of original • Faraday’s Law • Magnitude of induced EMF given by:

  4. A conducting loop is halfway into a magnetic field. Suppose the magnetic field begins to increase rapidly in strength. • The loop is pushed upward, toward the top of the page.  • The loop is pushed downward, toward the bottom of the page.  • The loop is pulled to the left, into the magnetic field.  • The loop is pushed to the right, out of the magnetic field.  • The tension in the wires increases but the loop does not move. Which of the following statements is true?

  5. A conducting loop is halfway into a magnetic field. Suppose the magnetic field begins to increase rapidly in strength. • The loop is pushed upward, toward the top of the page.  • The loop is pushed downward, toward the bottom of the page.  • The loop is pulled to the left, into the magnetic field.  • The loop is pushed to the right, out of the magnetic field.  • The tension in the wires increases but the loop does not move. Which of the following statements is true?

  6. A current-carrying wire is pulled away from a conducting loop in the direction shown. • There is a clockwise current around the loop.  • There is a counterclockwise current around the loop.  • There is no current around the loop. As the wire is moving, is there a cw current around the loop, a ccw current or no current?

  7. A current-carrying wire is pulled away from a conducting loop in the direction shown. • There is a clockwise current around the loop.  • There is a counterclockwise current around the loop.  • There is no current around the loop. As the wire is moving, is there a cw current around the loop, a ccw current or no current?

  8. A square loop of copper wire is pulled through a region of magnetic field as shown in the figure. • F2 = F4 > F1 = F3 2. F3 > F2 = F4 > F1 3. F3 > F4 > F2 > F1 4. F4 > F2 > F1 = F35. F4 > F3 > F2 > F1 Rank in order, from strongest to weakest, the pulling forces,F1, F2, F3, and F4 that must be applied to keep the loop moving at constant speed. 

  9. A square loop of copper wire is pulled through a region of magnetic field as shown in the figure. • F2 = F4 > F1 = F3 2. F3 > F2 = F4 > F1 3. F3 > F4 > F2 > F1 4. F4 > F2 > F1 = F35. F4 > F3 > F2 > F1 Rank in order, from strongest to weakest, the pulling forces,F1, F2, F3, and F4 that must be applied to keep the loop moving at constant speed. 

  10. Motional emf The lightbulb in the circuit has a resistance of 12 Ω and consumes 5.0 W of power; the rod is 1.25 m long and moves to the left with a constant speed of 3.1 m/s. What is the strength of the magnetic field? and To find I: Now …

  11. Motional emf The lightbulb in the circuit has a resistance of 12 Ω and consumes 5.0 W of power; the rod is 1.25 m long and moves to the left with a constant speed of 3.1 m/s. What external force is required to maintain the rod’s constant speed?

  12. Review: Rotation Variablesv, , f, T w • Velocity (v): • How fast a point moves. • Units: usually m/s • Angular Frequency (): • How fast something rotates. • Units: radians / sec v v r v= r • Frequency ( f ): • How fast something rotates. • Units: rotations / sec = Hz • Period (T): • How much time one full rotation takes. • Units: usually seconds f = / 2 T = 1 /f = 2/ 

  13. v = wr 1 w • q v v r 2 x e wAB t -wAB Generators and EMF EMF is voltage! eside 1 = v B L sin(q) 2rL = A eside 1 = wr B L sin(q) eside 2 = wr B L sin(q) eloop = eside 1 + eside 2 = 2wr B L sin(q) eloop = w A B sin(q) eloop = w A B sin(wt)

  14. At which time does the loop have the greatest emf (greatest / t)? • 1 • 2 • 3

  15. At which time does the loop have the greatest emf (greatest / t)? • 1 • 2 • 3 1) Has greatest flux, but q = 0 so e = 0. 2) (Preflight example) q 30 so ewAB/2. 3) Flux is zero, but q = 90 so e = wAB.

  16. Flux is maximum Most lines thru loop EMF is minimum Just before: lines enter from left Just after: lines enter from left No change! Flux is minimum Zero lines thru loop EMF is maximum Just before: lines enter from top. Just after: lines enter from bottom. Big change! • • x x Comparison:Flux vs. EMF

  17. CheckpointRotating Loop Flux is _________ at moment shown. Increasing decreasing not changing Which of the following graphs is the correct graph of EMF vs. angle for the loop shown above? When q=30°, the EMF around the loop is: increasing decreasing not changing

  18. = 30 e q CheckpointRotating Loop Flux is decreasing at moment shown. When q=30°, the EMF around the loop is: increasing decreasing not changing EMF is increasing!

  19. Generator

  20. Voltage! Generators and Torque • = w A B sin(q) Connect loop to resistance R use I=V/R: I = w A B sin(q) / R w • q v v r Recall: t = A B I sin(q) = w A2 B2 sin2(q)/R x Torque, due to current and B field, tries to slow spinning loop down. Must supply external torque to keep it spinning at constant w

  21. Example Generator A generator consists of a square coil of wire with 40 turns, each side is 0.2 meters long, and it is spinning with angular velocity w = 2.5 radians/second in a uniform magnetic field B=0.15 T. Determine the direction of the induced current at instant shown. Calculate the maximum emf and torque if the resistive load is 4W. • = NA B w sin(q) Units? w • v v t = NI A B sin(q) Units? x

  22. Example Generator A generator consists of a square coil of wire with 40 turns, each side is 0.2 meters long, and it is spinning with angular velocity w = 2.5 radians/second in a uniform magnetic field B=0.15 T. Determine the direction of the induced current at instant shown. Calculate the maximum emf and torque if the resistive load is 4W. • = NA B w sin(q) w • v = (40) (0.2m)2 (0.15T) (2.5 radians/s) = 0.6 Volts v q x t = NI A B sin(q) Note: Emf is maximum at q=90 t = 40*I0.15A*(0.2m)2 * 0.15 T* 1 = 0.036 Newton-meters Note: Torque is maximum at q=90

  23. Power LinesCheckpoint • Power is transferred from the power plant to your house through high voltage power lines because: • Generators at power plants operate at high voltages. • It will decrease power loss. • The power company wants to discourage people from climbing on the lines.

  24. Motor An electric motor is exactly the opposite of a generator – it uses the torque on a current loop to create mechanical energy.

More Related