1 / 47

Access Control ( Hardware )

Access Control ( Hardware ). June 25, 2010 Created by Castaly / Andy Chen. Access Control. Guideline Introduction GV-Reader Series GV-Controller Series Accessories Advance Section Summary FAQ. Guideline for Access Control. Access Control. AS-H. Introduction. Introduction.

mickey
Download Presentation

Access Control ( Hardware )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Access Control( Hardware ) June 25, 2010 Created by Castaly / Andy Chen

  2. Access Control • Guideline • Introduction • GV-Reader Series • GV-Controller Series • Accessories • Advance Section • Summary • FAQ

  3. Guideline for Access Control

  4. Access Control AS-H Introduction

  5. Introduction • What is access control? • Access Control is any mechanism by which a system grants or revokes the right to access some data, or perform some action. Normally, a user must first login to a system, using some Authentication system. Next, the Access Control mechanism controls what operations the user may or may not make by comparing the UserID to an Access Control database.

  6. Introduction • In order to install an Access Control System, you will need the hardware items below. • GV-Controller • GV-Readers / GV-GF Fingerprint Reader

  7. Access Control AS-H01 System Structure

  8. System Structure for Access Control

  9. Access Control AS-H02 GV-Reader Series

  10. What’s Reader? • Data Reader • A input device • A combination of readers or tags

  11. What’s Reader? • GV-Reader Series Products • GV-Reader 1251 • GV-Reader 1352 V2 • GV-GF1900 • GV-GF1901 • GV-GF1902 • GV-AS100

  12. What’s Reader? • GV-Reader 1251 • Support Wiegand 26 / RS485 Interface • Frequency: 125KHz • Type of Card: E • Card / Tag distance: 4 cm / 3 cm • Temperature: -20 ~ 65 C

  13. What’s Reader? • GV-Reader 1352V2 • Support Wiegand 26 / RS485 Interface • Frequency: 13.56MHz • Type of Card: M / F • Card / Tag distance: 5 cm / 4 cm • Temperature: -20 ~ 65 C

  14. What’s Reader?

  15. What’s Reader? • GV-GF Enrolled Installation

  16. What’s Reader? • GV-GF1900 • Wigand 26 • Frequency: 13.56MHz • Type of GV-Card: F • Temperature: 0 ~ 65 C • Sensing Area: 12 mm x 16 mm • Sensor: Capacitive • No output • Operate Mode: Card + Finger

  17. What’s Reader? • GV-GF1901 • Wigand 26 / RS485 • Frequency: 13.56MHz • Type of GV-Card: F • Temperature: 0 ~ 65 C • Sensing Area: 13.2 mm x 18.5 mm • Sensor: Capacitive • Support 1 output ( 240V, 2.5A ) • 1900 Fingerprints • Operate Mode: Card + Finger or Finger Only mode

  18. What’s Reader? • GV-GF1902 • Wigand 26 / RS485 • Frequency: 13.56MHz • Type of GV-Card: F • Temperature: 0 ~ 65 C • Sensing Area: 17 mm x 20 mm • Sensor: Optical • Support 1 output ( 240V, 2.5A ) • 1900 Fingerprints • Operate Mode: Card + Finger or Finger Only mode

  19. What’s Reader?

  20. Access Control AS-H03 GV-Controller Series

  21. Access Control • GV-AS200 Controller • GV-AS400 Controller • GV-AS100 Controller • GV-ASBox

  22. GV-AS200 • GV-AS200 Controller

  23. GV-AS200 • GV-AS200 Controller • Two to four doors controller • Support 4 Wiegand card reader 26~40 bits • Support up to 8 card readers via RS485 • 4 Inputs / 3 outputs for each door • Inputs: Sensor, Button, Fire, Tamper • Outputs: Alarm, Door, Urgent

  24. GV-AS200 • GV-AS200 Controller • What if there is a disconnection between GV-AS200 controller and GV-ASManager, can GV-AS200 controller still be operated? • 65536 event buffer • 10000 access card information • What happens to GV-AS200 controller if connection is back?

  25. GV-AS200 • GV-AS200 Controller • Not support GV-GFV1901, GV-GFV1902 RS485 interface • GV-GF can ONLY use Wiegand interface • Connect to ASManager via RS485 or TCP/IP • RS485 must connect to GV-Hub, GV-Com or GV-Net I/O card v3.1 • Connect Card Reader to AS200 Controller via Wiegand or RS485

  26. GV-AS400 • GV-AS400 Controller

  27. GV-AS400 • GV-AS400 Controller • A four doors controller • Support 8 Wiegand card reader 26~64 bits • Support up to 8 GV-Readers / GV-GF via RS485 • 16 Inputs / 16 outputs • Max voltage / current difference between 1~8 outputs and 9~16 outputs

  28. GV-AS400 • GV-AS400 Controller • Connect up to 4 GV-I/O box • GV-IOBox 4,8,16 • Max 80 inputs / 80 outputs • GV-Reader / GV-GF can connect up to 8 via RS485 connection • Only compatible with GeoFinger1901/1902 • Not support Security mode

  29. GV-AS400 • GV-AS400 Controller • What does it mean when ” low battery” error message shows up in GV-ASKeypad? • AS400 remains 10 hours after the battery stops working.

  30. GV-AS100 • GV-AS100

  31. GV-AS100 • GV-AS100 • One door controller • Support 1 Wiegand interface ( 26~64 bits ) • 65536 event buffer • Support 1000 Card information • 3 inputs and 2 outputs • No support tag

  32. GV-AS100 • GV-AS100 • Program Mode *227 Access the card manager function *276 Access Security Mode *347 Display system information *738 Access Parameter Setting *737 Restores GV-AS100 to factory default

  33. GV-AS100 • GV-AS100 • Program Mode *837 Test numeral keys to see if they can be displayed properly * Used to cancel the selection or go back to previous page 0 Used to go to the next page # Used to save the data that was modified or programmed in the system and quit.

  34. GV-AS100GV-ASBox • GV-AS100 With GV-ASBox • Support Doors  1 door to 2 doors • The card information  1000 to 40000 • The internet connection  RS485 to TCP/IP • I/O  3 IN / 2 Out to 11 IN / 10 Out

  35. GV-AS100GV-ASBox • GV-AS100 With GV-ASBox • Wigand interface  2 in total • RS485 interface  1 in total • GV-GF  4 in total ( ASBox )

  36. GV-AS100GV-ASBox • GV-AS100 With GV-ASBox • Web Setting Switch • When this switch is on, you can modify advance setting of GV-AS100 through the web interface. When the switch is off, advance setting are not accessible. • Briefly went through web interface of GV-AS100 with GVAS- box. ( Very similar to AS400 )

  37. Access Control AS-H04 Accessories

  38. Accessories • GV-Keypad • GV-Battery

  39. GV-Keypad • GV-Keypad • Load default in AS200 and ASBox • Upgrade Firmware • Setting Parameter, such as ID, local time • Display System information, such as memory status, IP address, firmware version…etc

  40. GV-Battery • GV-Battery • Act as UPS • 4 hours max Life span • Can be used in GV-AS200 Controller and other GeoVision device. • Recommended third party battery • Yuasa NPH 5-12 • GP1245 ( CSB )

  41. GV-Battery • GV-Battery • Minimum Requirement for the third-party battery • Voltage 12v with suggested 5A • Must have Terminal for Power cable connection • The size of Battery approximately around the below • Length 3.54” • Width 2.75” • Height 3.93”

  42. Access Control AS-H05 Advance Section – Demo

  43. Advance Section - Demo • How to connect GV-Reader via RS-485? • How to connect GV-Reader via Wiegand? • How to setup I/O in GV-AS 200 controller? • How to setup I/O in GV-AS400 controller? • How to setup I/O in GV-AS100 with ASBox controller? • How to add / delete a card in GV-AS100? • How to enable / disable a card in GV-AS100? • How to restore Factory Default in GV-AS100?

  44. Access Control Summary AS-H06

  45. Summary • Review All different Hardware’s features

  46. Summary • Review All different Hardware’s features

  47. Access Control FAQ

More Related