1 / 25

Dynamic Tests of Field Specimens

Dynamic Tests of Field Specimens. Puneet Agarwal, Asli Kurtulus, Farn-Yuh Menq, and Sharon Wood Department of Civil Engineering University of Texas at Austin. Test Specimens. 6'-0". 3'-0". 6'-3". 6'-3". Bent 2. Bent 1. Terminology. Longitudinal Response of Bridge. Transverse Response

melva
Download Presentation

Dynamic Tests of Field Specimens

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Dynamic Tests of Field Specimens Puneet Agarwal, Asli Kurtulus,Farn-Yuh Menq, and Sharon Wood Department of Civil Engineering University of Texas at Austin

  2. Test Specimens 6'-0" 3'-0" 6'-3" 6'-3" Bent 2 Bent 1

  3. Terminology Longitudinal Response of Bridge Transverse Response of Bridge

  4. Scope of Presentation • Response of Bent 2 (short bent) is summarized. • Types of dynamic excitation: • Structural excitation using modal hammer • Ground excitation using T-Rex • Structural excitation using Thumper • Linear and nonlinear response was observed.

  5. Austin Weather 120 6 Daily High Temperature 100 5 80 4 Daily Low Temperature 60 3 Temperature, degree F Rainfall Since 1 June 2005, in. Dates of Tests 40 2 20 1 Cumulative Rainfall 0 0 6/1/2005 6/8/2005 6/15/2005 6/22/2005 6/29/2005 7/6/2005 7/13/2005 7/20/2005 7/27/2005 8/3/2005

  6. Instrumentation • Bent Cap • Two, 3D accelerometers • Two sets of three geophones • Columns • Strain gages • 1D accelerometers at three levels • Shafts • Strain gages • Two sets of three geophones in each shaft • Soil • One set of three geophones at ground surface

  7. Modal Hammer • Essentially free-vibration response. • Very low levels of excitation. • Accelerometers and geophones captured response. • Strain gages exhibited only noise.

  8. Modal Hammer f = 16.6 Hz  = 6.1% 0.1 0.05 Longitudinal Acceleration (g) 0 -0.05 -0.1 0 0.5 1 1.5 Time (sec)

  9. Modal Hammer Longitudinal Response 1.0 0.9 f = 16.6 Hz 0.8 0.7 0.6 Power Density 0.5 0.4 0.3 0.2 0.1 0.0 0 10 20 30 40 50 Frequency (Hz)

  10. Harmonic Excitation • Stepped Sine • Sufficient cycles to achieve steady-state response at each frequency increment. • Duration of tests ranged from 2 to 10 minutes. • Chirp • Duration of tests ranged from 10 to 30 seconds. • Fixed Sine • Excitation at natural frequency observed during stepped sine tests.

  11. T-Rex – Position 3

  12. T-Rex – Longitudinal Excitation Stepped Sine: 20-10 Hz 0.8 0.6 0.4 0.2 Longitudinal acceleration (g) 0 -0.2 -0.4 -0.6 -0.8 0 50 100 150 200 Time (sec) T-Rex is 25.3 ft from Bent 2 (Position 3)

  13. T-Rex – Longitudinal Excitation Stepped Sine: 20-10 Hz 0.8 0.6 0.4 0.2 Transverse acceleration (g) 0 -0.2 -0.4 -0.6 -0.8 0 50 100 150 200 Time (sec) T-Rex is 25.3 ft from Bent 2 (Position 3)

  14. T-Rex – Stepped Sine (20 – 10 Hz) Longitudinal Response 1.0 0.9 f = 14.6 Hz 0.8 0.7 0.6 Power Density 0.5 0.4 0.3 0.2 0.1 0.0 5 10 15 20 25 Frequency (Hz) T-Rex is 25.3 ft from Bent 2 (Position 3)

  15. N S W T-Rex – Fixed Sine (15 Hz) Longitudinal Response of Column 2N 4 2 0 N W E -2 Distance from Ground Surface (ft) S -4 -6 Direction ofMotion -8 -10 -20 -15 -10 -5 0 5 10 15 Range of Measured Strains (microstrain) T-Rex is 25.3 ft from Bent 2 (Position 3)

  16. Thumper – Longitudinal Excitation

  17. Thumper – Longitudinal Excitation Stepped Sine: 20-5 Hz 30% of Peak Force 0.5 Longitudinal acceleration (g) 0 -0.5 0 20 40 60 80 100 120 140 160 Time (sec)

  18. Thumper – Stepped Sine Longitudinal Response 30% of Peak Force 1.0 0.8 f = 12.6 Hz 0.6 Power Density 0.4 0.2 0 5 10 15 20 25 Frequency (Hz)

  19. Longitudinal Response Transverse Response Frequency Response 35 30.0 30 25 23.0 20.5 20 Predominant Frequency, Hz 16.6 14.6 15 12.6 10 5 0 Thumper Modal Hammer T-Rex

  20. Thumper – Longitudinal Excitation Stepped Sine: 12-5 Hz 80% of Peak Force 1.5 1.0 0.5 0 Longitudinal acceleration (g) -0.5 -1.0 -1.5 0 100 200 300 400 500 Time (sec)

  21. Thumper – Stepped Sine Longitudinal Response 80% of Peak Force 1.0 f varies during test 0.8 0.6 Power Density 0.4 0.2 0 5 6 7 8 9 10 11 12 Frequency (Hz)

  22. Longitudinal Response 20 Range of Nonlinear Response 16.6 15 12.6 11.7 – 12.0 10.9 8.2 – 9.5 10 Predominant Frequency, Hz 7.6 – 8.2 5 0 Modal Hammer 30% 60% 80% 100% Modal Hammer % of Peak Force using Thumper

  23. Thumper – Longitudinal Excitation Gaps were observed at the shaft/soil interface.

  24. S E W Thumper – Fixed Sine (9.5 Hz) Longitudinal Response of Column 2N 4 2 0 N W E -2 Distance from Ground Surface (ft) S -4 -6 Direction ofMotion -8 -80 -60 -40 -20 0 20 40 60 80 Range of Measured Strains (microstrain) 70% of Peak Force

  25. Summary • Only a cursory review of the data has been completed. • Both bents experienced nonlinear response when excited using Thumper. • Soil gapping was observed. • Extent of concrete cracking is not known. • Static pull-over tests will be conducted after thorough review of the data. • Response of top 6 to 12 in. of soil is sensitive to moisture content.

More Related