1 / 27

Microscopic aspects of rock deformation (Part I)

Microscopic aspects of rock deformation (Part I). ESCI 302. Deformation mechanisms. Operative mechanisms depend on: Temperature ( T ) Lithostatic pressure ( p litho ) Fluid pressure ( p f ) Differential stress ( σ d = σ 1 - σ 3 ) Strain rate ( ) Porosity ( Φ ) Grain size ( d )

medeirosd
Download Presentation

Microscopic aspects of rock deformation (Part I)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Microscopic aspects of rock deformation (Part I) ESCI 302

  2. Deformation mechanisms • Operative mechanisms depend on: • Temperature (T) • Lithostatic pressure (plitho) • Fluid pressure (pf) • Differential stress (σd = σ1- σ3) • Strain rate ( ) • Porosity (Φ) • Grain size (d) • Chemical conditions • Rock type

  3. Deformation mechanisms • Tell us about bulk rheology (e.g., power-law creep) • Result in the grain-scale fabric & microstructures of metamorphic rocks (e.g., crystallographic preffered orientations) • Tell us about physical conditions during deformation (e.g. T, plitho, pf etc.)

  4. Deformation mechanisms • Upper crust: • Brittle deformation dominant • (also elastic deformation) • Mid to lower crust: • Elastic deformation, ± brittle failure (minor), • Dislocation creep (“crystal plasticity”) • Other diffusion controlled “ductile” mechanisms

  5. Two classes of def. mechs. • Elastic-recoverable (ε < 2-3%) • Recoverable • Not permanent • Instantaneous • No breaking of bonds • Non-recoverable (ε > 2-3%) • Permanent • Time-dependant, non-instantaneous (rock strength related to ) • Bonds broken

  6. DM: early to pre-diagenesis • Intergranular flow (particle flow) • rolling and sliding of rigid particles past each other • in unlithified sediments • low confining pressures and/or high fluid pressures • no microstructures

  7. DM: fault zones near brittle-ductile transition • Cataclastic flow: • high effective pressures (e.g., depths >6 km) • involves continuous brittle fracturing of grains in a rock • produces progressive decrease in grain size • different from granular flow in that small-scale fracturing plays an integral role • little/no imprint on microfabric (no actual deformation of mineral grains except fracturing)

  8. Alpine Fault cataclasite

  9. Example: compaction • due to sediment burial (increases load) • involves partial removal of fluid phase from porous solid +/- removal of void space in response to sediment load • process yields porosity decrease with burial depth (non-linear) • May involve significant inter-granular flow and/or cataclastic flow • Little microfabric evidence (except fissilty and pencil structures in shale)

  10. Example: compaction • Porosity: • fraction of void space in rocks void solid

  11. Example: compaction • Fluid pressure • works against lithostatic pressure • reduces effective normal stress (impedes compaction) • Effective pressure plitho plitho pf plitho plitho

  12. Compaction in wet rocks • Terzaghi’s spring analogue Karl von Terzaghi (1883-1963) “Father of soil mechanics” 1 2a 2b 3 underconsolidated consolidated time

  13. Compaction in wet rocks • Terzaghi’s spring analogue fluid supports extra weight extra fluid pressure fluid at rest A 1 2a 2b 3 underconsolidated consolidated time

  14. Compaction in wet rocks • Terzaghi’s spring analogue Weight transferred from fluid to load-bearing grains. Extra weight supported by compacted grains 1 2a 2b 3 underconsolidated consolidated time

  15. Compaction in dry rocks • Terzaghi’s spring analogue 1 2

  16. Compaction – reality check • actual rock behaviour is not spring-like, i.e. not elastic • Real compaction leads to permanent deformation (intergranular flow, fracturing etc) • time scale of compaction: 10s – 100s m.y. • pore closure by deformation and / or cementation of sediments yields “plugged system.” This causes retained high fluid pressures (Pf> Phydro) at depths of several km (i.e., pressurized fluid cannot escape).

  17. Fluid pressure gradients • Lithostatic vs. hydrostatic Pf • Fluid pressure transition zone between two end-members • State of undercompaction / under-consolidation (problem in petroleum industry) Fluid Pressure ratio l = Pf/Plitho CD/Ch 8/depth curves/hydro-litho

  18. Sources of fluids • Compaction-related pore fluids: connate brines • Water incorporated into a sediment during sub-aqueous deposition • Fluids released from minerals by dehydration during metamorphism • Adsorbed water (e.g. low grade smectite clays)

  19. DM: diffusion and dislocation creep

  20. Steady-state creep • Remember me? activation energy pre-exponential factor stress exponent strain rate differential stress universal gas constant = 8.314 J K-1 mol-1 temperature

  21. Deformation mechanism maps • conditions of stress and temperature for some flow mechanisms can be plotted on a deformation mechanism map • deformation mechanism maps… … are lab-derived … are often monomineralic (e.g., “pure qtzite”) … are either “dry” or “wet” … are derived for 1 grain size

  22. Deformation mechanism maps show fastest operative mechanism contours of strain-rate Flow-stress Flow-stress (normalized) Flow-stress (normalized) wet quartzite d = 100 µm calcite d = 100 µm Crystal plasticity Crystal plasticity Diffusion creep Diffusion creep Passchier & Trouw, 2005

  23. Deformation mechanism maps • Problems: • only approximate, lab-derived • incorrect in detail (e.g. evidence from natural rocks suggests different def. mech. at certain stress or temperature level) • not all known mechanisms shown- only plot the fastest one despite others possibly operating together • not all conditions that natural rocks encounter are accounted for (e.g. hydrolytic weakening) • may not indicate effect of changing grain size • best to do: consider maps as a qualitative illustration of the relative importance of the different deformation mechanisms

  24. DIY: deformation mechanism maps Passchier & Trouw 2005

More Related