1 / 23

BINP Tau-Charm Project Update

This update provides information on the Novosibirsk CT Project, IR design, FF and QD0, polarization insertions, and more. Topics include D-Dbar mixing, CP violation searches in charm decays, and rare and forbidden charm decays. The workshop took place in Orsay from February 15-18, 2009.

mccoolc
Download Presentation

BINP Tau-Charm Project Update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. BINP Tau-Charm Project UpdateE.Levichev, BINP, Novosibirsk SuperB Workshop LAL, Orsay, February 15-18, 2009

  2. Topics:1. Novosibirsk CT Project briefly2. IR design3. FF and QD04. Polarization insertions

  3. Layout Injection facility exists Tunnel for the linac and the technical straight section of the factory is ready

  4. Scientific case ► D-Dbar mixing ► CP violation searches in charm decays ► Rare and forbidden charm decays ► Standard Model tests in  leptons decays ► Searches for lepton flavor violation ► CP/T violation searches in t leptons decays Requirements: L > 1034 cm-2 s-1, longitudinal polarization ►Production of the polarized anti-nucleons Energy = 1 GeV with reduced luminosity

  5. Specifications ► Variable energy Ecm= 3 – 4.5 GeV (from J/psi to charm baryons) (2 – 4.5 GeV?)► L = 1÷2×1035 cm-2s-1 (crab-waist approach)► e-s are polarized longitudinally at IP► No energy asymmetry► No beam monochromatization► Energy calibration with medium accuracy is enough (Compton backscattering)

  6. Main accelerator parameters 8 m of the SC wigglers with 20-cm-period are used to control the beam parameters at different energies

  7. Luminosity D.Shatilov

  8. IR  Old A.Bogomyagkov P.Piminov New 

  9. Last modifications • Beta*x = 2 cm  3 cm (in QF1Beta x = 800 m  350m) • Separation of the betas in SY & SX is better • –I betweenSY1 –SY2 & SX1-SX2 is designed with very high accuracy • Sextupole lengthL = 30  20 cm • Special weak sextupoles (~3% of the main ones) correct4D DA very effectively • Special sextupoles open the energy bandwidth to ±2% • Chromaticity of Betas is intrinsically small for the telescope scheme and sextupoles are used to zero the chromaticity of Alphas (Betas’)

  10. Parameters old/new x 300 bunches = 1 x 1035

  11. IR optics L1/2 = 85 m

  12. IR sextupole correction scheme

  13. Telescope transformation A.Bogomyagkov Map: Twiss transformation: Transport notation: Chromaticity: Telescopic symmetry: Sextupoles to cancel

  14. Bandwidth BW = ±2%

  15. DA correction P.Piminov

  16. FF quadrupoles

  17. QD0 Cosine SC quadrupole with short end coil region with optimized 6th and 10th integrated harmonics (<10-3) Active quench protection system with heater P.Vobly

  18. QD0 main coils connection Two additional current sources allows to compensate influence of the coils misalignment and manufacturing errors on the field with high accuracy. The tuning is done during the magnetic measurements.

  19. QD0 assembling

  20. Polarization insertion I S.Nikitin Central arc Disadvantage: the scheme operates well only for the nominal energy. At the nominal energy the magnets rotate the spin around the field direction by (2k+1), k is integer. Solenoids rotate the spin by /2 around the velocity vector: a polarization vector is longitudinal at IP and transverse outside the polarization insertion.

  21. Polarization insertion II Achromatic central arc Advantage: the scheme is optimally tuned by the solenoids in the whole energy range!

  22. Polarization insertion III Arc Achromatic arc Longitudinal polarization degree, averaged on time and particle ensemble

  23. Summary ►CT project interaction region is designed with parameters (bandwidth, dynamic aperture, crab sextupoles location, etc.) satisfied the project requirements ►Design of the final focus superconducting quadrupoles is started and preliminary configuration of the large aperture QD0, shared by both beams, with the required parameters is found ►New polarization insertion based on the achromatic arc is proposed. Solenoids allow to tune the polarization at IP in the wide energy range

More Related