1 / 15

CONFORMITY ASSESSMENT SYSTEMS ADOPTED BY BUREAU OF INDIAN STANDARDS

Overview of the certification schemes adopted by the Bureau of Indian Standards, including product certification, hallmarking of gold jewelry, eco-mark management system certification, and more.

mblack
Download Presentation

CONFORMITY ASSESSMENT SYSTEMS ADOPTED BY BUREAU OF INDIAN STANDARDS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CONFORMITY ASSESSMENT SYSTEMS ADOPTED BY BUREAU OF INDIAN STANDARDS

  2. Product Certification Schemes General Products Domestic Certification Certification schemes for Foreign Manufacturers and Indian Importers. Hallmarking of Gold Jewellery. Eco-mark Management System Certification Schemes Quality System Certification including HACCP. Environment Management System Certification. Occupational Health & Safety BIS Certification Activities

  3. PRODUCT CERTIFICATION Modeled on ISO Guide 28 Conforms to ISO Guide 65 ISO TYPE 5 SCHEME Almost 1200 Products Voluntary Scheme

  4. PRODUCT CERTIFICATION • OVERVIEW • STARTED IN 1955-56 UNDER ISI CERTIFICATION MARK ACT OF 1952 • TYPE 5 THIRD PARTY CERTIFICATION • GENERALLY VOLUNTARY IN NATURE • COVERS CONSUMER & INDUSTRIAL PRODUCTS • PROGRESS >18000 • LICENCES IN OPERATION 15446 • PRODUCTS COVERED 1200 • INDUSTRIAL UNITS COVERED 8450 • DOCUMENTATION • BIS CERTIFICATION MANUAL BASED ON ISO/IEC GUIDES Contd..

  5. HQ – Delhi5 Regional Offices33 Branch Offices5 Inspection Offices8 Labs

  6. LABORATORY TESTING • OVERVIEW • FIRST BIS LABORATORY SET UP IN 1962 • SAMPLES TESTED ANNUALLY IN BIS LABORATORIES 30000 • SAMPLES TESTED ANNUALLYIN OUTSIDE RECOGNIZED LABORATORIES 8500 • CHAIN OF BIS LABORATORIES • CENTRAL LABORATORY 1 • REGIONAL LABORATORIES 4 • BRANCH LABORATORIES 3 • DOCUMENTATION • QUALITY MANUAL ALIGNED WITH • ISO/IEC GUIDES 25 • EN 45001

  7. Certification Process • APPLICATION • PRELIMINARY INSPECTION • TESTING OF SAMPLES • ACCEPTANCE OF SCHEME OF TESTING AND INSPECTION • MARKING FEE • GRANT OF LICENCE • MONITORING/SURVEILLANCE • SURPRISE VISITS • TESTING IN FACTORY • TESTING IN INDEPENDENT LABORATORIES • FACTORY SAMPLES • MARKET SAMPLES • FEEDBACK FROM ORGANIZED CONSUMERS • INVESTIGATION OF COMPLAINTS • RENEWAL OF LICENCE EVERY ONE/ TWO YEARS

  8. 109 Products Food Colours & Food Additives Cement Gas Cylinders Electrical Appliances Infant Milk Products Pressure Stoves Packaged Drinking Water and Natural Mineral Water Thermometers Mandatory Certification

  9. QUALITY SYSTEMS CERTIFICATION • OVERVIEW • ISO 9000 SERIES ADOPTED BY BIS IN 1988 • OVER 160 BIS AUDITORS • LAUNCHED IN SEPTEMBER 1999 • OVER 1200 UNITS LICENCED - FOR QUALITY SYSTEMS CERTIFICATION • RvA ACCREDITATION FOR 23 TECHNOLOGY SECTORS • DOCUMENTATION • BIS CERTIFICATION MANUAL/PROCEDURES BASED ON • ISO/IEC GUIDES 61 AND 62 • EN 45012 • PROCEDURE • APPLICATION • ASSESSMENT • GRANT OF LICENCE • SURVEILLANCE AUDITS • RENEWAL OF LICENCE

  10. ENVIRONMENTAL MANAGEMENT SYSTEMS • BIS ADOPTED ISO 14000 SERIES OF STANDARDS • CERTIFICATION STARTED - 1997 • SECTORS COVERED • CEMENT, TEXTILES & ALLIED PRODUCTS • NUCLEAR, THERMAL AND STEEL PLANTS • ENGINEERING & CHEMICAL UNITS

  11. HAZARD ANALYSIS AND CRITICAL CONTROL POINT (HACCP) CERTIFICATION • IS 15000 - BASED ON CODEX ALIMENTARIUS COMMISSION DOCUMENT ALINORM 97/13A

  12. INTERNATIONAL CERTIFICATION • IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) • IEC SYSTEM FOR CONFORMITY TESTING TO STANDARDS FOR SAFETY OF ELECTRICAL EQUIPMENTS (IECEE) • AGENT OF FOREIGN CERTIFICATION SCHEMES NAMELY CSA, SABS

  13. Certification ofForeign Manufacturers and Imported Goods • Launched in September 1999. • Allows Grant of BIS Standard Mark to Foreign Manufacturers and Indian Importers. • Prime Objective of the scheme -Regulating the quality of imports • No. of Licences granted 50

  14. BILATERAL AGREEMENTS • CHINA • CUBA • GERMANY • ISRAEL • MAURITIUS • RUSSIAN FEDERATION • TURKEY • BHUTAN • NEPAL • ARMENIA

More Related